Re: port-i386/48570: Xircom RBE-100 cause system freeze (NetBSD 6.1.3 NetBSD/i386)

[Filippo Ravanello <kakuro69%gmail.com@localhost>]

The following reply was made to PR port-i386/48570; it has been noted by GNATS.

From: Filippo Ravanello <kakuro69%gmail.com@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-i386/48570: Xircom RBE-100 cause system freeze (NetBSD 6.1.3 
NetBSD/i386)
Date: Sun, 27 Apr 2014 10:24:00 +0200

 Hi David, thank you for your reply, and excuse me for the delay in mine.
 At the moment I=92ve installed NetBSD 6.1.4 (i386) on the same old =
 machine, the issue persists also in this release. I=92ve wiped out 6.1.4 =
 and installed NetBSD 5.2.2 (i386) instead and curiously the tlp0 based =
 NIC works out of the box.
 
 On 22 Feb 2014, at 19:35, David Holland <dholland-bugs%netbsd.org@localhost> =
 wrote:
 
 > The following reply was made to PR port-i386/48570; it has been noted =
 by GNATS.
 >=20
 > From: David Holland <dholland-bugs%netbsd.org@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc:=20
 > Subject: Re: port-i386/48570: Xircom RBE-100 cause system freeze =
 (NetBSD
 > 6.1.3 NetBSD/i386)
 > Date: Sat, 22 Feb 2014 18:34:51 +0000
 >=20
 > On Tue, Feb 04, 2014 at 12:20:00AM +0000, kakuro69%gmail.com@localhost wrote:
 >> I'm experiencing a problem with my PCMCIA based NIC, it's a Xircom
 >> RBE-100 card (I'm on NetBSD 6.1.3 i386) when I try to activate it
 >> with this command: "ifconfig tlp0 inet 192.168.1.85 netmask
 >> 255.255.255.0 up" the led on the card blink but few seconds later
 >> the laptop freezes and I have to manually restart it.
 >=20
 > Are you in a position to build a kernel with TLP_DEBUG enabled? I'm
 > not sure if this will help, but with luck it will give at least some
 > further info.
 >=20
 > --=20
 > David A. Holland
 > dholland%netbsd.org@localhost
 >=20