Re: kern/48549: can't mount CDs

[Martin Husemann <martin%duskware.de@localhost>]

The following reply was made to PR kern/48549; it has been noted by GNATS.

From: Martin Husemann <martin%duskware.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: kern/48549: can't mount CDs
Date: Fri, 24 Jan 2014 18:22:02 +0100

 On Fri, Jan 24, 2014 at 05:00:00PM +0000, J. Hannken-Illjes wrote:
 >  As you get ENODEV here, please post the parts of dmesg relevant
 >  to your cdrom device.
 >  
 >  You have /dev on root or tmpfs?
 
 on /
 
 /dev/wd0a on / type ffs (log, local)
 tmpfs on /var/shm type tmpfs (local)
 kernfs on /kern type kernfs (local)
 ptyfs on /dev/pts type ptyfs (local)
 procfs on /proc type procfs (local)
 
 
 Full dmesg below.
 
 Martin
 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.99.30 (NIGHT-OWL) #221: Fri Jan 24 14:03:42 CET 2014
        
martin%night-owl.duskware.de@localhost:/usr/src/sys/arch/amd64/compile/NIGHT-OWL
 total memory = 3956 MB
 avail memory = 3827 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 Acer            Aspire 7740                     (Rev            )
 mainbus0 (root)
 ACPI: RSDP 0xf6a10 000024 (v02 PTLTD )
 ACPI: XSDT 0xbf7f2b2f 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
 ACPI: FACP 0xbf7e2000 0000F4 (v03 INTEL  CALPELLA 06040000 PTEC 00000001)
 ACPI: DSDT 0xbf7e3000 00C03F (v02 Intel  CALPELLA 06040000 INTL 20060912)
 ACPI: FACS 0xbf79afc0 000040
 ACPI: HPET 0xbf7fed6a 000038 (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
 ACPI: MCFG 0xbf7feda2 00003C (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
 ACPI: SLIC 0xbf7fedde 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
 ACPI: APIC 0xbf7fef54 000084 (v01 PTLTD         APIC   06040000  LTP 00000000)
 ACPI: BOOT 0xbf7fefd8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
 ACPI: SSDT 0xbf7e1000 0009F1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
 ACPI: All ACPI Tables successfully acquired
 cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 
0x20652
 cpu1 at mainbus0 apid 4: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 
0x20652
 cpu2 at mainbus0 apid 1: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 
0x20652
 cpu3 at mainbus0 apid 5: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz, id 
0x20652
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20131218
 acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,06040000>, AslId <INNA,00000000>
 ACPI: SSDT 0xbf71ac18 0003AE (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
 ACPI: SSDT 0x0 0003AE (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
 ACPI: SSDT 0xbf718018 000842 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
 ACPI: SSDT 0x0 000842 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
 ACPI: SSDT 0xbf719a98 000303 (v01  PmRef    ApIst 00003000 INTL 20060912)
 ACPI: SSDT 0x0 000303 (v01  PmRef    ApIst 00003000 INTL 20060912)
 ACPI: SSDT 0xbf717d98 000119 (v01  PmRef    ApCst 00003000 INTL 20060912)
 ACPI: SSDT 0x0 000119 (v01  PmRef    ApCst 00003000 INTL 20060912)
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
 acpivga0 at acpi0 (PEGP): ACPI Display Adapter
 acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
 acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
 acpiout1: brightness levels: 10 20 30 40 50 60 70 80 90 100
 acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
 acpiout3 at acpivga0 (DVI, 0x0210): ACPI Display Output Device
 acpivga0: connected output devices:
 acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
 acpivga0:   0x0200 (acpiout2): TV, head 0, bios detect
 acpivga0:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
 acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0, bios detect
 FWHD (INT0800) at acpi0 not configured
 LDRC (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
 acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
 acpibat0: SANYO LION rechargeable battery
 acpibat0: granularity: low->warn 0.042 Ah, warn->full 2.640 Ah
 acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
 pckbc1 at acpi0 (KBD0, PNP0303) (kbd port): io 0x60,0x64 irq 1
 pckbc2 at acpi0 (PS2M, SYN0302) (aux port): irq 12
 PDRC (PNP0C02) at acpi0 not configured
 acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
 acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
 acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
 acpiwmibus at acpiwmi0 not configured
 acpitz0 at acpi0 (TZS0): cpu0 cpu1 cpu2 cpu3
 acpitz0: levels: critical 92.0 C, passive 88.0 C, passive cooling
 acpitz1 at acpi0 (TZS1)
 acpitz1: levels: critical 92.0 C, passive cooling
 ACPI: Enabled 7 GPEs in block 00 to 3F
 ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] 
(20131218/hwxface-646)
 ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20131218/hwxface-646)
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pms0: Synaptics touchpad version 7.2
 pms0: Up/down buttons, Palm detect
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x12)
 agp0 at pchb0: can't find internal VGA device config space
 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0045 (rev. 0x12)
 ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> x16 @ 2.5Gb/s
 pci1 at ppb0 bus 2
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x68e0 (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 radeondrm0 at vga0: ATI Mobility Radeon HD 5000
 radeondrm0: Initialized radeon 1.29.0 20080613
 hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
 hdaudio0: interrupting at ioapic0 pin 17
 hdafg0 at hdaudio0: ATI R6xx HDMI
 hdafg0: HDMI00 2ch: Digital Out [Jack]
 hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
 vendor 0x8086 product 0x3b64 (miscellaneous communications, revision 0x06) at 
pci0 dev 22 function 0 not configured
 ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
 ehci0: interrupting at ioapic0 pin 16
 ehci0: EHCI version 1.0
 usb0 at ehci0: USB revision 2.0
 hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio1: interrupting at ioapic0 pin 22
 hdafg1 at hdaudio1: Realtek ALC670
 hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
 hdafg1: DIG01 2ch: SPDIF Out [Jack]
 hdafg1: ADC02 2ch: Line In [Jack], Mic In [Built-In]
 hdafg1: ADC03 2ch: Mic In [Jack]
 hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg1: full duplex, playback, capture, independent
 hdvsmfg at hdaudio1 not configured
 ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x05)
 ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
 pci2 at ppb1 bus 3
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 bge0 at pci2 dev 0 function 0: Broadcom BCM57780 Fast Ethernet
 bge0: interrupting at ioapic0 pin 16
 bge0: HW config 000a0554, 00004004, 00000008, 00000000
 bge0: ASIC BCM57780 A1 (0x57780001), Ethernet address 00:26:2d:90:46:d1
 bge0: setting short Tx thresholds
 brgphy0 at bge0 phy 1: BCM57780 1000BASE-T media interface, rev. 1
 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x3b44 (rev. 0x05)
 ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
 pci3 at ppb2 bus 5
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 athn0 at pci3 dev 0 function 0: Atheros AR9280
 athn0: rev 2 (2T2R), ROM rev 22, address c4:17:fe:ce:37:34
 athn0: interrupting at ioapic0 pin 17
 athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
 ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
 ehci1: interrupting at ioapic0 pin 23
 ehci1: EHCI version 1.0
 usb1 at ehci1: USB revision 2.0
 ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xa5)
 pci4 at ppb3 bus 15
 pci4: i/o space, memory space enabled
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b09 (rev. 0x05)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b29 (rev. 0x05)
 ahcisata0: interrupting at ioapic0 pin 19
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 
0xff20ff63<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 atabus2 at ahcisata0 channel 4
 atabus3 at ahcisata0 channel 5
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x05)
 ichsmb0: interrupting at ioapic0 pin 18
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 pci5 at mainbus0 bus 255
 pci5: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb1 at pci5 dev 0 function 0: vendor 0x8086 product 0x2c62 (rev. 0x02)
 pchb2 at pci5 dev 0 function 1: vendor 0x8086 product 0x2d01 (rev. 0x02)
 pchb3 at pci5 dev 2 function 0: vendor 0x8086 product 0x2d10 (rev. 0x02)
 pchb4 at pci5 dev 2 function 1: vendor 0x8086 product 0x2d11 (rev. 0x02)
 pchb5 at pci5 dev 2 function 2: vendor 0x8086 product 0x2d12 (rev. 0x02)
 pchb6 at pci5 dev 2 function 3: vendor 0x8086 product 0x2d13 (rev. 0x02)
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 2128044880 Hz quality 3000
 uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 ahcisata0 port 4: device present, speed: 1.5Gb/s
 acpiacad0: AC adapter online.
 wd0 at atabus0 drive 0
 wd0: <Hitachi HTS545050B9A300>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
 atapibus0 at atabus2: 1 targets
 cd0 at atapibus0 drive 0: <HL-DT-STDVDRAM GT30N, KZJ9CM31623, 1.01> cdrom 
removable
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
 uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, 
addr 2
 uhub2: single transaction translator
 uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, 
addr 2
 uhub3: single transaction translator
 uhub2: 6 ports with 6 removable, self powered
 uhub3: 8 ports with 8 removable, self powered
 uvideo0 at uhub3 port 5 configuration 1 interface 0: SuYin Video WebCam, rev 
2.00/5.00, addr 3
 video0 at uvideo0: SuYin Video WebCam, rev 2.00/5.00, addr 3
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)