Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot

[Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>]

The following reply was made to PR port-cobalt/46170; it has been noted by 
GNATS.

From: Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-cobalt/46170: NetBSD/cobalt 6.0_BETA does not boot
Date: Sat, 25 Jan 2014 00:44:13 +0900 (JST)

 Hi,
 
 Recent NetBSD/cobalt (32bit) 6.99.* boots on my Cobalt Qube 2.
 But it is unstable. I have confirmed 2014-01-14 and 2014-01-23.
 
 Sometimes random command generates illegal instruction, segfault
 and bus error, tar(1) silently dies, postfix utility does not work properly,
 dhcpcd cannot get IP address etc.
 
 I will keep watch NetBSD/cobalt 6.99.*.
 
 
 
 Cobalt Microserver Diagnostics - 'We serve it, you surf it'
 Built Wed Mar  3 21:26:25 PST 1999
 
  1.LCD Test..............................**NOT FOUND**
  2.Controller Test.........................PASS
  5.Bank 0:.................................64M
  6.Bank 1:.................................64M
  7.Bank 2:.................................64M
  8.Bank 3:.................................64M
  9.Serial Test.............................PASS
 10.PCI Expansion Slot....................**Unknown Card**
 12.IDE Test................................PASS
 13.Ethernet Test...........................PASS
 16.RTC Test................................PASS
 BOOTLOADER: trying to boot from partition /dev/hda1
 Decompressing  done
 Decompressing  done.
 
 >> NetBSD/cobalt 6.99.30 Bootloader, Revision 1.0 (Thu Jan 23 22:48:07 UTC 
 >> 2014) [@0x80f00000]
 >> Model:               Cobalt Qube 2
 >> Memory:              262144 k
 >> PROM boot string:    root=/dev/hda1 ro
 Boot [wd0a:netbsd]:
 Loading: wd0a:netbsd
 5078544+133040 [230944+231957]=0x569b48
 Starting at 0x80001000
 
 pmap_steal_memory: seg 0: 0x56a 0x56a 0xfffe 0xfffe
 pmap_steal_memory: seg 0: 0x5a0 0x5a0 0xfffe 0xfffe
 pmap_steal_memory: seg 0: 0x5a2 0x5a2 0xfffe 0xfffe
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.99.30 (GENERIC) #0: Thu Jan 23 22:56:22 UTC 2014
         
ryo_on%bismuth.elements.tetera.org@localhost:/usr/obj/cobelt-current/sys/arch/cobalt/compile/GENERIC
 Cobalt Qube 2
 total memory = 256 MB
 avail memory = 245 MB
 mainbus0 (root)
 com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
 com0: console
 cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev. 10.0
 cpu0: 48 TLB entries, 16MB max page size
 cpu0: 32KB/32B 2-way set-associative L1 instruction cache
 cpu0: 32KB/32B 2-way set-associative write-back L1 data cache
 mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
 panel0 at mainbus0 addr 0x1f000000
 gt0 at mainbus0 addr 0x14000000
 pci0 at gt0
 pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
 tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
 tlp0: interrupting at level 1
 tlp0: Ethernet address 00:10:e0:00:5b:b3
 lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pcib0 at pci0 dev 9 function 0
 pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
 viaide0 at pci0 dev 9 function 1
 viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
 viaide0: primary channel interrupting at irq 14
 atabus0 at viaide0 channel 0
 viaide0: secondary channel interrupting at irq 15
 atabus1 at viaide0 channel 1
 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at 
pci0 dev 9 function 2 not configured
 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x61) at 
pci0 dev 10 function 0 not configured
 VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x61) at 
pci0 dev 10 function 1 not configured
 VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20, 
revision 0x62) at pci0 dev 10 function 2 not configured
 VIA Technologies VT6306 IEEE 1394 Host Controller (Firewire serial bus, 
interface 0x10, revision 0x46) at pci0 dev 10 function 3 not configured
 tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
 tlp1: interrupting at level 2
 tlp1: Ethernet address 00:10:e0:00:55:b6
 lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
 lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 wd0 at atabus0 drive 0
 wd0: <IC35L090AVV207-0>
 wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 pid 1(init): ABI set to O32 (e_flags=0x1007)
 Fri Jan 24 15:35:36 UTC 2014
 Starting root file system check:
 /dev/rwd0a: file system is clean; not checking
 swapctl: adding /dev/wd0b as swap device at priority 0
 Starting file system checks:
 random_seed: /var/db/entropy-file: Not present
 Setting tty flags.
 Setting sysctl variables:
 ddb.onpanic: 1 -> 0
 Starting network.
 Hostname: mercury.elements.tetera.org
 IPv6 mode: host
 Configuring network interfaces:.
 Adding interface aliases:.
 Waiting for DAD completion for statically configured addresses...
 Building databases: dev, utmp, utmpx.
 Starting syslogd.
 Mounting all filesystems...
 Clearing temporary files.
 Checking quotas: done.
 Setting securelevel: kern.securelevel: 0 -> 1
 Starting virecover.
 Checking for core dump...
 savecore: no core dump
 Starting local daemons:.
 Updating motd.
 postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db)
 /usr/bin/newaliases: Shared object has no run-time symbol table
 /etc/rc.d/postfix exited with code 1
 Starting inetd.
 Starting cron.
 The following components reported failures:
     /etc/rc.d/postfix
 See /var/run/rc.log for more information.
 Fri Jan 24 15:35:58 UTC 2014
 
 NetBSD/cobalt (mercury.elements.tetera.org) (tty00)
 
 login: Jan 24 15:36:00 mercury getty[349]: /dev/ttyZ0: Device not configured
 
 --
 Ryo ONODERA // ryo_on%yk.rim.or.jp@localhost
 PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3