NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/44776: dual fiber i82546GB (wm) worked in NetBSD-4, not in -5, nor in -current
The following reply was made to PR kern/44776; it has been noted by GNATS.
From: Masanobu SAITOH <msaitoh%execsw.org@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: kiers%original.xs4all.nl@localhost, kern-bug-people%netbsd.org@localhost,
gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost,
msaitoh%execsw.org@localhost
Subject: Re: kern/44776: dual fiber i82546GB (wm) worked in NetBSD-4, not
in -5, nor in -current
Date: Tue, 18 Jun 2013 16:28:54 +0900
(2011/03/28 3:55), kiers%original.xs4all.nl@localhost wrote:
>> Number: 44776
>> Category: kern
>> Synopsis: dual fiber i82546GB (wm) worked in NetBSD-4, not in -5, nor
>> in -current
>> Confidential: no
>> Severity: serious
>> Priority: medium
>> Responsible: kern-bug-people
>> State: open
>> Class: sw-bug
>> Submitter-Id: net
>> Arrival-Date: Sun Mar 27 18:55:00 +0000 2011
>> Originator: Bert Kiers
>> Release: 5.1 GENERIC i386
>> Organization:
> XS4ALL
>> Environment:
> NetBSD mammalou.boppelans.net 5.1 NetBSD 5.1 (GENERIC) #0: Sun Nov 7
> 14:39:56 UTC 2010
> builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/i386/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/i386/compile/GENERIC
> i386
>> Description:
> dual fiber i82546GB (wm(4), Intel PRO/1000 MF Server Adapter) worked in
> NetBSD-4.0.2, but not in NetBSD-5.0.2, nor in -current
>
> Hardware is a Soekris 5501, switch is HP 1800-24G
>
> Card is probed in NetBSD-4 as:
> wm1 at pci0 dev 14 function 1: Intel i82546GB 1000BASE-X Ethernet, rev. 3
> wm1: interrupting at irq 15
> wm1: Ethernet address 00:04:23:ae:2a:d5
> wm1: 1000baseSX, 1000baseSX-FDX, auto
>
> and in NetBSD-5.1 as:
> wm1 at pci0 dev 14 function 1: Intel i82546GB 1000BASE-X Ethernet, rev. 3
> wm1: interrupting at irq 15
> wm1: 32-bit 33MHz PCI bus
> wm1: 256 word (8 address bits) MicroWire EEPROM
> wm1: Ethernet address 00:04:23:ae:2a:d5
> wm1: 1000baseSX, 1000baseSX-FDX, auto
>
> as soon as ifconfig or dhclient touches it, the link on the switch goes down
> and then (ofcourse) no traffic. After a reboot, there is link again.
>
> now link, then
> mammalou# ifconfig wm1
> wm1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>
> capabilities=2bf80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Tx,UDP6CSUM_Tx>
> enabled=0
> address: 00:04:23:ae:2a:d5
> media: Ethernet autoselect (1000baseSX full-duplex)
> status: active
> still link
> mammalou# ifconfig wm1 up
> (or # dhclient wm1)
> now, no more link
> mammalou# ifconfig wm1
> wm1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>
> capabilities=2bf80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Tx,UDP6CSUM_Tx>
> enabled=0
> address: 00:04:23:ae:2a:d5
> media: Ethernet autoselect (none)
> status: no carrier
> inet6 fe80::204:23ff:feae:2ad5%wm1 prefixlen 64 scopeid 0x6
>
> mammalou# ifconfig wm1 media 1000base-SX
> mammalou# ifconfig wm1
> wm1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>
> capabilities=2bf80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Tx,UDP6CSUM_Tx>
> enabled=0
> address: 00:04:23:ae:2a:d5
> media: Ethernet 1000baseSX (1000baseSX full-duplex)
> status: active
> inet6 fe80::204:23ff:feae:2ad5%wm1 prefixlen 64 scopeid 0x6
>
> at this moment, NetBSD sees link, but switch does not
>
> mediaopt fdx does not change things
>
>> How-To-Repeat:
> # ifconfig wm1 up
> ethernet link link goes down
>
>> Fix:
Could you try the latest -current?
A few days ago, my 83546GB card worked.
--
-----------------------------------------------
SAITOH Masanobu (msaitoh%execsw.org@localhost
msaitoh%netbsd.org@localhost)
Home |
Main Index |
Thread Index |
Old Index