Re: kern/32626

[Matteo Beccati <php%beccati.com@localhost>]

The following reply was made to PR kern/32626; it has been noted by GNATS.

From: Matteo Beccati <php%beccati.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: kern/32626
Date: Mon, 15 Apr 2013 09:28:20 +0200

 Hi,
 
 after upgrading to 6.1 RC2, I've started experiencing the same issue.
 Every night, during the generation of the daily report, the USB hard
 drive generates quite a lot of these errors:
 
 umass0: BBB reset failed, TIMEOUT
 umass0: BBB bulk-in clear stall failed, TIMEOUT
 umass0: BBB bulk-out clear stall failed, TIMEOUT
 
 After that I cannot cleanly shutdown, nor kill -9 some processes. I
 don't recall this happening with 6.0, but maybe the drive just had less
 data (i.e. there are backup copies of the old filesystems now).
 
 Here's a dmesg output for reference.
 
 NetBSD 6.1_RC2 (GENERIC)
 total memory = 2685 MB
 avail memory = 2628 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 System manufacturer System Product Name (System Version)
 mainbus0 (root)
 ACPI Warning: Optional field Pm2ControlBlock has zero address or length:
 0x0000000000000000/0x1 (20110623/tbfadt-586)
 cpu0 at mainbus0 apid 0: AMD E-350 Processor, id 0x500f10
 cpu1 at mainbus0 apid 1: AMD E-350 Processor, id 0x500f10
 ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 21, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
 ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND
 (20110623/psargs-392)
 ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW]
 (Region) (20110623/nsinit-380)
 ioapic0 reenabling
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 AMDN (PNP0C01) at acpi0 not configured
 S800 (PNP0C02) at acpi0 not configured
 SIO1 (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 RMSC (PNP0C02) at acpi0 not configured
 npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
 npx1: reported by CPUID; using exception 16
 NBRM (PNP0C02) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 BROD (PNP0C02) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
 RMEM (PNP0C01) at acpi0 not configured
 OMSC (PNP0C02) at acpi0 not configured
 acpiwmi0 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
 wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
 apm0 at acpi0: Power Management spec V1.2
 attimer1: attached to pcppi1
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x1510 (rev. 0x00)
 vga1 at pci0 dev 1 function 0: vendor 0x1002 product 0x9802 (rev. 0x00)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 drm at vga1 not configured
 hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
 hdaudio0: interrupting at ioapic0 pin 19
 hdafg0 at hdaudio0: ATI R6xx HDMI
 hdafg0: HDMI00 2ch: Digital Out [Jack]
 hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
 ppb0 at pci0 dev 4 function 0: vendor 0x1022 product 0x1512 (rev. 0x00)
 ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev.
 0x40)
 ahcisata0: interrupting at ioapic0 pin 19
 ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP
 0xf732ff05<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 atabus2 at ahcisata0 channel 2
 atabus3 at ahcisata0 channel 3
 atabus4 at ahcisata0 channel 4
 atabus5 at ahcisata0 channel 5
 ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
 ohci0: interrupting at ioapic0 pin 18
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
 ehci0: interrupting at ioapic0 pin 17
 ehci0: dropped intr workaround enabled
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controller, 5 ports each: ohci0
 usb1 at ehci0: USB revision 2.0
 ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
 ohci1: interrupting at ioapic0 pin 18
 ohci1: OHCI version 1.0, legacy support
 usb2 at ohci1: USB revision 1.0
 ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
 ehci1: interrupting at ioapic0 pin 17
 ehci1: dropped intr workaround enabled
 ehci1: BIOS has given up ownership
 ehci1: EHCI version 1.0
 ehci1: companion controller, 5 ports each: ohci1
 usb3 at ehci1: USB revision 2.0
 piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x42)
 piixpm0: polling (SB800)
 iic0 at piixpm0: I2C bus
 pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
 ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 ohci2 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
 ohci2: interrupting at ioapic0 pin 18
 ohci2: OHCI version 1.0, legacy support
 usb4 at ohci2: USB revision 1.0
 ppb2 at pci0 dev 21 function 0: vendor 0x1002 product 0x43a0 (rev. 0x00)
 ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 ath0 at pci3 dev 0 function 0: Atheros 9285
 ath0: interrupting at ioapic0 pin 16
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: mac 192.2 phy 14.0 radio 12.0
 ppb3 at pci0 dev 21 function 1: vendor 0x1002 product 0x43a1 (rev. 0x00)
 ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
 pci4 at ppb3 bus 4
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet
 (rev. 0x06)
 re0: interrupting at ioapic0 pin 17
 re0: Ethernet address 14:da:e9:6e:3b:9d
 re0: using 256 tx descriptors
 rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 4
 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 1000baseT-FDX, auto
 ppb4 at pci0 dev 21 function 2: vendor 0x1002 product 0x43a2 (rev. 0x00)
 ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
 pci5 at ppb4 bus 5
 pci5: i/o space, memory space enabled, rd/line, wr/inv ok
 vendor 0x1033 product 0x0194 (USB serial bus, interface 0x30, revision
 0x03) at pci5 dev 0 function 0 not configured
 ppb5 at pci0 dev 21 function 3: vendor 0x1002 product 0x43a3 (rev. 0x00)
 ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
 pci6 at ppb5 bus 6
 pci6: i/o space, memory space enabled, rd/line, wr/inv ok
 vendor 0x1033 product 0x0194 (USB serial bus, interface 0x30, revision
 0x03) at pci6 dev 0 function 0 not configured
 ohci3 at pci0 dev 22 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
 ohci3: interrupting at ioapic0 pin 18
 ohci3: OHCI version 1.0, legacy support
 usb5 at ohci3: USB revision 1.0
 ehci2 at pci0 dev 22 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
 ehci2: interrupting at ioapic0 pin 17
 ehci2: dropped intr workaround enabled
 ehci2: BIOS has given up ownership
 ehci2: EHCI version 1.0
 ehci2: companion controller, 4 ports each: ohci3
 usb6 at ehci2: USB revision 2.0
 pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1700 (rev. 0x43)
 pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1701 (rev. 0x00)
 pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1702 (rev. 0x00)
 pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1703 (rev. 0x00)
 amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family14h)
 pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1704 (rev. 0x00)
 pchb6 at pci0 dev 24 function 5: vendor 0x1022 product 0x1718 (rev. 0x00)
 pchb7 at pci0 dev 24 function 6: vendor 0x1022 product 0x1716 (rev. 0x00)
 pchb8 at pci0 dev 24 function 7: vendor 0x1022 product 0x1719 (rev. 0x00)
 isa0 at pcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 acpicpu0: C2: I/O, lat 100 us, pow     0 mW
 acpicpu0: P0: FFH, lat   1 us, pow  4940 mW, 1600 MHz
 acpicpu0: P1: FFH, lat   1 us, pow  3282 mW, 1280 MHz
 acpicpu0: P2: FFH, lat   1 us, pow  1400 mW,  800 MHz
 acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
 acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
 acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
 acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
 acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
 acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
 acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
 acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
 acpicpu1 at cpu1: ACPI CPU
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 1600616250 Hz quality 3000
 uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 5 ports with 5 removable, self powered
 uhub1 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 5 ports with 5 removable, self powered
 uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 5 ports with 5 removable, self powered
 uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 5 ports with 5 removable, self powered
 uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 uhub5 at usb5: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5: 4 ports with 4 removable, self powered
 uhub6 at usb6: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub6: 4 ports with 4 removable, self powered
 ahcisata0 port 0: device present, speed: 3.0Gb/s
 wd0 at atabus0 drive 0
 wd0: <KINGSTON SNV425S264GB>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 61057 MB, 124053 cyl, 16 head, 63 sec, 512 bytes/sect x 125045424
 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
 (Ultra/100) (using DMA)
 umass0 at uhub1 port 3 configuration 1 interface 0
 umass0: JMicron USB to ATA/ATAPI bridge, rev 2.00/1.00, addr 2
 umass0: using SCSI over Bulk-Only
 scsibus0 at umass0: 2 targets, 1 lun per target
 sd0 at scsibus0 target 0 lun 0: <TOSHIBA, MK6459GSX, > disk fixed
 sd0: 596 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 sectors
 aubtfwl0 at uhub5 port 3
 uhub7 at uhub1 port 5: vendor 0x0409 product 0x005a, class 9/0, rev
 2.00/1.00, addr 3
 uhub7: single transaction translator
 uhub7: 4 ports with 4 removable, self powered
 uhidev0 at uhub7 port 3 configuration 1 interface 0
 uhidev0: Logitech USB Receiver, rev 2.00/12.01, addr 4, iclass 3/1
 ukbd0 at uhidev0
 wskbd0 at ukbd0: console keyboard, using wsdisplay0
 uhidev1 at uhub7 port 3 configuration 1 interface 1
 uhidev1: Logitech USB Receiver, rev 2.00/12.01, addr 4, iclass 3/1
 uhidev1: 8 report ids
 ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
 wsmouse0 at ums0 mux 0
 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
 uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
 uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
 uhidev2 at uhub7 port 3 configuration 1 interface 2
 uhidev2: Logitech USB Receiver, rev 2.00/12.01, addr 4, iclass 3/0
 uhidev2: 33 report ids
 uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
 uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
 uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
 uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
 uhidev3 at uhub7 port 4 configuration 1 interface 0
 uhidev3: Logitech USB Keyboard, rev 1.10/79.00, addr 5, iclass 3/1
 ukbd1 at uhidev3
 wskbd1 at ukbd1 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev4 at uhub7 port 4 configuration 1 interface 1
 uhidev4: Logitech USB Keyboard, rev 1.10/79.00, addr 5, iclass 3/0
 uhidev4: 5 report ids
 uhid7 at uhidev4 reportid 3: input=2, output=0, feature=0
 uhid8 at uhidev4 reportid 4: input=1, output=0, feature=0
 uhid9 at uhidev4 reportid 5: input=0, output=0, feature=5
 uhidev5 at uhub7 port 4 configuration 1 interface 2
 uhidev5: Logitech USB Keyboard, rev 1.10/79.00, addr 5, iclass 3/1
 ums1 at uhidev5: 5 buttons and Z dir
 wsmouse1 at ums1 mux 0
 Kernelized RAIDframe activated
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 aubtfwl0: ath3k-1.fw open fail 2
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)