NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
kern/47648: NetBSD 6.1_RC1 ACPI interupt routing problem + other ACPI lossage
>Number: 47648
>Category: kern
>Synopsis: NetBSD 6.1_RC1 ACPI interupt routing problem + other ACPI
>lossage
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Thu Mar 14 14:55:00 +0000 2013
>Originator: Reinoud Zandijk
>Release: NetBSD 6.1_RC1
>Organization:
NetBSD
>Environment:
System: NetBSD heethoofdje.13thmonkey.org 6.1_RC1 NetBSD 6.1_RC1 (GENERIC) #7:
Wed Mar 13 12:44:31 CET 2013
reinoud%heethoofdje.13thmonkey.org@localhost:/usr/sources/cvs.netbsd.org/src-6/sys/arch/i386/compile/GENERIC
i386
Architecture: i386
Machine: i386
>Description:
Updating a P4 machine from NetBSD 6.0_BETA2 to NetBSD 6.1_RC1 fails due to
various ACPI lossage. It results in a machine having hundreds of thousands of
interrupts/second that are not handled properly and in broken devices, most
notably auixp(9).
Booting the same kernel in non-ACPI mode makes the problems disappear and
auixp(9) is working properly again.
> vmstat -i
interrupt total rate
TLB shootdown 5026 19
cpu0 timer 26343 101
ioapic0 pin 9 75401688 291126
ioapic0 pin 1 1251 4
ioapic0 pin 19 6121 23
ioapic0 pin 14 5 0
ioapic0 pin 15 6996 27
ioapic0 pin 17 4692 18
Total 75452122 291320
As can be seen in the dmesg, this pin is assigned to
acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,06000529>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
I've attached the dmesg for ACPI and non-ACPI booting to this PR.
---- ACPI ----
NetBSD 6.1_RC1 (GENERIC) #7: Wed Mar 13 12:44:31 CET 2013
reinoud%heethoofdje.13thmonkey.org@localhost:/usr/sources/cvs.netbsd.org/src-6/sys/arch/i386/compile/GENERIC
total memory = 1918 MB
avail memory = 1875 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf33
cpu1 at mainbus0 apid 1Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1_RC1 (GENERIC) #7: Wed Mar 13 12:44:31 CET 2013
reinoud%heethoofdje.13thmonkey.org@localhost:/usr/sources/cvs.netbsd.org/src-6/sys/arch/i386/compile/GENERIC
total memory = 1918 MB
avail memory = 1873 MB
timecounter: Timecounters tick every 10.000 msec
userconf: configure system autoconfiguration:
uc> disable auixp*
[359] auixp* disabled
uc> quit
Continuing...
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf33
cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf33
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,06000529>, AslId <MSFT,00000097>
ioapic0 reenabling
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
LPTE (PNP0401) [ECP printer port] at acpi0 not configured
SIOR (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
RMSC (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
OMSC (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
RMEM (PNP0C01) [System Board] at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
acpi0: [MADT] LAPIC : CPU ID 1, LAPIC ID 0, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 2, LAPIC ID 1, FLAGS 0x01
acpi0: [MADT] I/O APIC : ID 2, GSI 0, ADDR 0xFEC00000
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 0, GSI 2, FLAGS 0x00
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 9, GSI 21, FLAGS 0x0F
acpi0: [FADT] FACS : 0x0000000077F50000
acpi0: [FADT] DSDT : 0x0000000077F40360
acpi0: [FADT] INT_MODEL : 0x0000000000000001
acpi0: [FADT] PM_PROFILE : 0x0000000000000000
acpi0: [FADT] SCI_INT : 0x0000000000000009
acpi0: [FADT] SMI_CMD : 0x00000000000000B0
acpi0: [FADT] ACPI_ENABLE : 0x00000000000000E1
acpi0: [FADT] ACPI_DISABLE : 0x000000000000001E
acpi0: [FADT] S4BIOS_REQ : 0x0000000000000000
acpi0: [FADT] PSTATE_CNT : 0x00000000000000E2
acpi0: [FADT] PM1a_EVT_BLK : 0x0000000000000800
acpi0: [FADT] PM1b_EVT_BLK : 0x0000000000000000
acpi0: [FADT] PM1a_CNT_BLK : 0x0000000000000F40
acpi0: [FADT] PM1b_CNT_BLK : 0x0000000000000000
acpi0: [FADT] PM2_CNT_BLK : 0x0000000000000850
acpi0: [FADT] PM_TMR_BLK : 0x0000000000000808
acpi0: [FADT] GPE0_BLK : 0x0000000000000820
acpi0: [FADT] GPE1_BLK : 0x0000000000000000
acpi0: [FADT] PM1_EVT_LEN : 0x0000000000000004
acpi0: [FADT] PM1_CNT_LEN : 0x0000000000000002
acpi0: [FADT] PM2_CNT_LEN : 0x0000000000000001
acpi0: [FADT] PM_TMR_LEN : 0x0000000000000004
acpi0: [FADT] GPE0_BLK_LEN : 0x0000000000000008
acpi0: [FADT] GPE1_BLK_LEN : 0x0000000000000000
acpi0: [FADT] GPE1_BASE : 0x0000000000000000
acpi0: [FADT] CST_CNT : 0x0000000000000000
acpi0: [FADT] P_LVL2_LAT : 0x0000000000000065
acpi0: [FADT] P_LVL3_LAT : 0x00000000000003E9
acpi0: [FADT] FLUSH_SIZE : 0x0000000000000400
acpi0: [FADT] FLUSH_STRIDE : 0x0000000000000010
acpi0: [FADT] DUTY_OFFSET : 0x0000000000000000
acpi0: [FADT] DUTY_WIDTH : 0x0000000000000008
acpi0: [FADT] DAY_ALRM : 0x000000000000000D
acpi0: [FADT] MON_ALRM : 0x0000000000000000
acpi0: [FADT] CENTURY : 0x0000000000000032
acpi0: [FADT] IAPC_BOOT_ARCH : 0x0000000000000003
acpi0: [FADT] RESET_VALUE : 0x0000000000000006
acpi0: [FADT] WBINVD : 0x0000000000000001
acpi0: [FADT] WBINVD_FLUSH : 0x0000000000000000
acpi0: [FADT] PROC_C1 : 0x0000000000000004
acpi0: [FADT] P_LVL2_UP : 0x0000000000000000
acpi0: [FADT] PWR_BUTTON : 0x0000000000000000
acpi0: [FADT] SLP_BUTTON : 0x0000000000000020
acpi0: [FADT] FIX_RTC : 0x0000000000000000
acpi0: [FADT] RTC_S4 : 0x0000000000000080
acpi0: [FADT] TMR_VAL_EXT : 0x0000000000000100
acpi0: [FADT] DCK_CAP : 0x0000000000000000
acpi0: [FADT] RESET_REG_SUP : 0x0000000000000000
acpi0: [FADT] SEALED_CASE : 0x0000000000000000
acpi0: [FADT] HEADLESS : 0x0000000000001000
acpi0: [FADT] CPU_SW_SLP : 0x0000000000000000
acpi0: [FADT] PCI_EXP_WAK : 0x0000000000000000
acpi0: [FADT] PLATFORM_CLK : 0x0000000000000000
acpi0: [FADT] S4_RTC_STS : 0x0000000000000000
acpi0: [FADT] REMOTE_POWER : 0x0000000000000000
acpi0: [FADT] APIC_CLUSTER : 0x0000000000000000
acpi0: [FADT] APIC_PHYSICAL : 0x0000000000000000
acpi0: [\ ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU1] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU2] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [_SB ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [PCI0] HID PNP0A03 UID 0 STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P0P1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000010000
acpi0: [SBSM] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140000
acpi0: [SBRG] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140003
acpi0: [PIC ] HID PNP0000 UID - STA 0xFFFFFFFF ADR -
acpi0: [DMAD] HID PNP0200 UID - STA 0xFFFFFFFF ADR -
acpi0: [TMR ] HID PNP0100 UID - STA 0xFFFFFFFF ADR -
acpi0: [RTC0] HID PNP0B00 UID - STA 0xFFFFFFFF ADR -
acpi0: [SPKR] HID PNP0800 UID - STA 0xFFFFFFFF ADR -
acpi0: [COPR] HID PNP0C04 UID - STA 0xFFFFFFFF ADR -
acpi0: [FDC ] HID PNP0700 UID - STA 0x00000000 ADR -
acpi0: [LPTE] HID PNP0401 UID - STA 0x0000000F ADR -
acpi0: [SIOR] HID PNP0C02 UID 46 STA 0xFFFFFFFF ADR -
acpi0: [RMSC] HID PNP0C02 UID 16 STA 0xFFFFFFFF ADR -
acpi0: [OMSC] HID PNP0C02 UID 0 STA 0xFFFFFFFF ADR -
acpi0: [UAR1] HID PNP0501 UID 1 STA 0x0000000F ADR -
acpi0: [PS2M] HID PNP0F03 UID - STA 0x00000000 ADR -
acpi0: [PS2K] HID PNP0303 UID - STA 0x0000000F ADR -
acpi0: [IDEC] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140001
acpi0: [PRID] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [SECD] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [S_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [S_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [AC97] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140005
acpi0: [MC97] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140006
acpi0: [USB1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000130000
acpi0: [USB2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000130001
acpi0: [EUSB] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000130002
acpi0: [P0P2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140004
acpi0: [SLAN] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000080000
acpi0: [P2P3] HID - UID - STA 0xFFFFFFFF ADR 0x00000000000C0000
acpi0: [RMEM] HID PNP0C01 UID 1 STA 0xFFFFFFFF ADR -
acpi0: [PWRB] HID PNP0C0C UID 170 STA 0x0000000B ADR -
acpi0: [LNKA] HID PNP0C0F UID 1 STA 0x0000000B ADR -
acpi0: [LNKB] HID PNP0C0F UID 2 STA 0x0000000B ADR -
acpi0: [LNKC] HID PNP0C0F UID 3 STA 0x0000000B ADR -
acpi0: [LNKD] HID PNP0C0F UID 4 STA 0x0000000B ADR -
acpi0: [_TZ ] HID - UID - STA 0xFFFFFFFF ADR -
\ [06] []
CPU1 [12] []
CPU2 [12] []
_SB [06] []
PCI0 [06] [] (PCI) @ 0x00:0x00:0x00:0x00 [R] [B] -> 0x00:0x00
P0P1 [06] [] (PCI) @ 0x00:0x00:0x01:0x00 [B] -> 0x00:0x01
SBSM [06] [] (PCI) @ 0x00:0x00:0x14:0x00
SBRG [06] [] (PCI) @ 0x00:0x00:0x14:0x03
PIC [06] []
DMAD [06] []
TMR [06] [] <attimer1>
RTC0 [06] []
SPKR [06] [] <pcppi1>
COPR [06] [] <npx1>
FDC [06] []
LPTE [06] []
SIOR [06] []
RMSC [06] []
OMSC [06] []
UAR1 [06] []
PS2M [06] []
PS2K [06] [] <pckbc1>
IDEC [06] [] (PCI) @ 0x00:0x00:0x14:0x01
PRID [06] []
P_D0 [06] []
P_D1 [06] []
SECD [06] []
S_D0 [06] []
S_D1 [06] []
AC97 [06] [] (PCI) @ 0x00:0x00:0x14:0x05
MC97 [06] [] (PCI) @ 0x00:0x00:0x14:0x06
USB1 [06] [] (PCI) @ 0x00:0x00:0x13:0x00
USB2 [06] [] (PCI) @ 0x00:0x00:0x13:0x01
EUSB [06] [] (PCI) @ 0x00:0x00:0x13:0x02
P0P2 [06] [] (PCI) @ 0x00:0x00:0x14:0x04 [B] -> 0x00:0x02
SLAN [06] [] (PCI) @ 0x00:0x02:0x08:0x00
P2P3 [06] [] (PCI) @ 0x00:0x02:0x0C:0x00
RMEM [06] []
PWRB [06] [] <acpibut0>
LNKA [06] []
LNKB [06] []
LNKC [06] []
LNKD [06] []
_TZ [06] []
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5833 (rev. 0x02)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x5838 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: vendor 0x1002 product 0x5834 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga1: ATI Radeon RS300 9100 IGP
radeondrm0: Initialized radeon 1.29.0 20080613
ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4347 (rev. 0x01)
ohci0: interrupting at ioapic0 pin 19
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4348 (rev. 0x01)
ohci1: interrupting at ioapic0 pin 19
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 19 function 2: vendor 0x1002 product 0x4345 (rev. 0x01)
ehci0: interrupting at ioapic0 pin 19
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4353 (rev. 0x18)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev.
0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at ixpide0 channel 1
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x434c (rev. 0x00)
ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4342 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ex0 at pci2 dev 8 function 0: 3Com 3c920B-EMB-WNM Integrated Fast Ethernet
(rev. 0x40)
ex0: interrupting at ioapic0 pin 18
ex0: MAC address 00:11:2f:52:44:7c
rlphy0 at ex0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci2 dev 10 function 0: vendor 0x1106 product 0x3044 (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 18
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:8c:83:d8
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
cbb0 at pci2 dev 12 function 0: vendor 0x1524 product 0x1411 (rev. 0x02)
vendor 0x1524 product 0x0510 (flash memory) at pci2 dev 12 function 1 not
configured
re0 at pci2 dev 14 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:e0:4c:1f:12:ec
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 3
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
cbb0: cacheline 0x10 lattimer 0x40
cbb0: bhlc 0x824010
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
vendor 0x1002 product 0x4341 (audio multimedia) at pci0 dev 20 function 5 not
configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu1 at cpu1: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3192621200 Hz quality 3000
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <ASUS CRW-5232A4, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
umass0 at uhub2 port 6 configuration 1 interface 0
umass0: HLDS Inc BD-Rewriter, rev 2.00/1.69, addr 2
umass0: using ATAPI over Bulk-Only
atapibus1 at umass0: 2 targets
cd1 at atapibus1 drive 0: <HL-DT-ST, BD-RE BE08LU20, 1.00> cdrom removable
wd0 at atabus1 drive 0
wd0: <WDC WD5000AACS-00ZUB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
tap0: Ethernet address f2:0b:a4:4c:bb:0a
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
(mouse won't autoattach:)
usl_detachtimeout
usl_detachtimeout: not detaching
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Unique ICs Unique ICs mouse, rev 1.00/0.01, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
---- non ACPI ----
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1_RC1 (GENERIC) #7: Wed Mar 13 12:44:31 CET 2013
reinoud%heethoofdje.13thmonkey.org@localhost:/usr/sources/cvs.netbsd.org/src-6/sys/arch/i386/compile/GENERIC
total memory = 1918 MB
avail memory = 1873 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf33
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5833 (rev. 0x02)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x5838 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: vendor 0x1002 product 0x5834 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga1: ATI Radeon RS300 9100 IGP
radeondrm0: Initialized radeon 1.29.0 20080613
ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4347 (rev. 0x01)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4348 (rev. 0x01)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 19 function 2: vendor 0x1002 product 0x4345 (rev. 0x01)
ehci0: interrupting at irq 10
ehci0: dropped intr workaround enabled
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4353 (rev. 0x18)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev.
0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at irq 14
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at irq 15
atabus1 at ixpide0 channel 1
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x434c (rev. 0x00)
ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4342 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ex0 at pci2 dev 8 function 0: 3Com 3c920B-EMB-WNM Integrated Fast Ethernet
(rev. 0x40)
ex0: interrupting at irq 3
ex0: MAC address 00:11:2f:52:44:7c
rlphy0 at ex0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci2 dev 10 function 0: vendor 0x1106 product 0x3044 (rev. 0x80)
fwohci0: interrupting at irq 3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:8c:83:d8
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
cbb0 at pci2 dev 12 function 0: vendor 0x1524 product 0x1411 (rev. 0x02)
vendor 0x1524 product 0x0510 (flash memory) at pci2 dev 12 function 1 not
configured
re0 at pci2 dev 14 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at irq 5
re0: Ethernet address 00:e0:4c:1f:12:ec
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 3
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
cbb0: cacheline 0x10 lattimer 0x40
cbb0: bhlc 0x824010
pci_intr_map: no mapping for pin A (line=ff)
cbb0: couldn't map interrupt
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5: vendor 0x1002 product 0x4341 (rev. 0x00)
auixp0: interrupting at irq 5
auixp0: soft resetting aclink
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3192688720 Hz quality 3000
auixp0: ac97: Analog Devices AD1888 codec; headphone, 20 bit DAC, no 3D stereo
auixp0: ac97: ext id 0x3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
auixp0: codec spdif support detected but disabled for now
audio0 at auixp0: full duplex, playback, capture, mmap, independent
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <ASUS CRW-5232A4, , 1.00> cdrom removable
cd0: 32-bit data port
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
umass0 at uhub2 port 6 configuration 1 interface 0
umass0: HLDS Inc BD-Rewriter, rev 2.00/1.69, addr 2
umass0: using ATAPI over Bulk-Only
atapibus1 at umass0: 2 targets
cd1 at atapibus1 drive 0: <HL-DT-ST, BD-RE BE08LU20, 1.00> cdrom removable
wd0 at atabus1 drive 0
wd0: <WDC WD5000AACS-00ZUB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ixpide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
tap0: Ethernet address f2:0b:a4:37:5f:02
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
(mouse won't autoattach)
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Unique ICs Unique ICs mouse, rev 1.00/0.01, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
>How-To-Repeat:
Boot a standard i386 kernel from nyftp.netbsd.org on this machine.
>Fix:
Unknown, for now, boot with ACPI disabled.
>Unformatted:
Home |
Main Index |
Thread Index |
Old Index