NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: port-evbarm/45229
The following reply was made to PR port-evbarm/45229; it has been noted by
GNATS.
From: Freddy DISSAUX <freddy.dsx%free.fr@localhost>
To: gnats-bugs%gnats.netbsd.org@localhost
Cc:
Subject: Re: port-evbarm/45229
Date: Mon, 11 Feb 2013 22:30:38 +0100
Hi,
I try NetBSD 6.0.1 and current (6.99.16):
- 6.0.1 SHEEVAPLUG_INSTALL (freeze at line 'Loading Kernel Image ...')
- 6.0.1 SHEEVAPLUG (boot ok)
- current SHEEVAPLUG_INSTALL (freeze at line 'Loading Kernel Image ...')
- current SHEEVAPLUG (boot ok)
I think 'freeze' is not the real problem. May be 'console' is not
correctly defined ?
Script started on Fri Feb 8 18:33:51 2013
sudo cu -l /dev/ttyU1 -s 115200
Connected
U-Boot 2010.03-01161-gd91b0a9 (Apr 22 2010 - 03:24:41)
Marvell-GuruPlug
SoC: Kirkwood 88F6281_A0
DRAM: 512 MB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Net: egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot: 3 2 1 0
Using egiga0 device
TFTP from server 192.168.251.17; our IP address is 192.168.251.250
Filename 'netbsd.ub'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
############
done
Bytes transferred = 7797952 (76fcc0 hex)
## Booting kernel from Legacy Image at 02000000 ...
Image Name: NetBSD/sheevaplug 6.0.1
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 7797888 Bytes = 7.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ...
U-Boot 2010.03-01161-gd91b0a9 (Apr 22 2010 - 03:24:41)
Marvell-GuruPlug
SoC: Kirkwood 88F6281_A0
DRAM: 512 MB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Net: egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot: 3 2 1 0
Using egiga0 device
TFTP from server 192.168.251.17; our IP address is 192.168.251.250
Filename 'netbsd.ub'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#########################################################
done
Bytes transferred = 4649088 (46f080 hex)
## Booting kernel from Legacy Image at 02000000 ...
Image Name: NetBSD/sheevaplug 6.0.1
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 4649024 Bytes = 4.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
## Transferring control to NetBSD stage-2 loader (at address 00008000) ...
NetBSD/evbarm (sheevaplug) booting ...
Loaded initial symtab at 0xc03a90ec, strtab at 0xc03e03e8, # entries 14040
pmap_postinit: Allocated 35 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0.1 (SHEEVAPLUG) #0: Thu Feb 7 20:33:07 CET 2013
root%xennet.bsdsx.fr@localhost:/usr/obj/sys/arch/evbarm/compile/SHEEVAPLUG
total memory = 512 MB
avail memory = 497 MB
cprng kernel: WARNING insufficient entropy at creation.
mainbus0 (root)
cpu0 at mainbus0: Sheeva 88SV131 rev 1 (ARM9E-S core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 16KB/32B 4-way Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C Data cache
mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood
mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff: Marvell SoC Timer
mvsocgpp at mvsoc0 unit 0 not configured
mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
ehci0 at mvsoc0 unit 0 offset 0x50000-0x51fff irq 19: Marvell USB 2.0 Interface
usb0 at ehci0: USB revision 2.0
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x11fff irq 29: Marvell TWSI controller
iic0 at gttwsi0: I2C bus
mvcesa at mvsoc0 unit 0 not configured
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet
Controller
mvgbe0 at mvgbec0 port 0 irq 11
mvgbe0: Ethernet address 00:50:43:01:85:d4
OUI 0x000ac2 model 0x000b rev 3 at mvgbe0 phy 0 not configured
mvgbe0: no PHY found!
mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet
Controller
mvgbe1 at mvgbec1 port 0 irq 15
mvgbe1: Ethernet address 00:50:43:01:85:d5
OUI 0x000ac2 model 0x000b rev 3 at mvgbe1 phy 1 not configured
mvgbe1: no PHY found!
mvpex at mvsoc0 unit 0 not configured
mvsata at mvsoc0 unit 0 not configured
mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital
Input/Output Interface
sdmmc0 at mvsdio0
uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
sdmmc0: bad CIS ptr 0
sdmmc0: couldn't read CIS
sdmmc0: i/o init failed
sdmmc0: bad CIS ptr 0
sdmmc0: couldn't read CIS
sdmmc0: i/o init failed
"Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0
function 1 not configured
"Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0
function 2 not configured
uhub1 at uhub0 port 1: Genesys Logic USB2.0 Hub, class 9/0, rev 2.00/77.60,
addr 2
uhub1: single transaction translator
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: Genesys Logic USB Storage, rev 2.00/99.09, addr 3
scsibus0 at umass0: 2 targets, 2 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 9909> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Generic, STORAGE DEVICE, 9909> disk removable
sd1: drive offline
cprng sysctl: WARNING insufficient entropy at creation.
boot device: <unknown>
root device:
Script done on Fri Feb 8 18:36:33 2013
Script started on Sat Feb 9 10:59:02 2013
sudo cu -l /dev/ttyU1 -s 115200
Connected
U-Boot 2010.03-01161-gd91b0a9 (Apr 22 2010 - 03:24:41)
Marvell-GuruPlug
SoC: Kirkwood 88F6281_A0
DRAM: 512 MB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Net: egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot: 3 2 1 0
Using egiga0 device
TFTP from server 192.168.251.17; our IP address is 192.168.251.250
Filename 'netbsd.ub'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#########################
done
Bytes transferred = 7994688 (79fd40 hex)
## Booting kernel from Legacy Image at 02000000 ...
Image Name: NetBSD/sheevaplug 6.99.16
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 7994624 Bytes = 7.6 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ...
U-Boot 2010.03-01161-gd91b0a9 (Apr 22 2010 - 03:24:41)
Marvell-GuruPlug
SoC: Kirkwood 88F6281_A0
DRAM: 512 MB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
Net: egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot: 3 2 1 0
Using egiga0 device
TFTP from server 192.168.251.17; our IP address is 192.168.251.250
Filename 'netbsd.ub'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######
done
Bytes transferred = 4845760 (49f0c0 hex)
## Booting kernel from Legacy Image at 02000000 ...
Image Name: NetBSD/sheevaplug 6.99.16
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 4845696 Bytes = 4.6 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
## Transferring control to NetBSD stage-2 loader (at address 00008000) ...
NetBSD/evbarm (sheevaplug) booting ...
[ Kernel symbol table missing! ]
Loaded initial symtab at 0xc03d9714, strtab at 0xc0413860, # entries 14786
pmap_postinit: Allocated 35 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.16 (SHEEVAPLUG) #0: Sat Feb 9 10:08:29 CET 2013
root%xennet.bsdsx.fr@localhost:/usr/obj/sys/arch/evbarm/compile/SHEEVAPLUG
total memory = 512 MB
avail memory = 497 MB
cprng kernel: WARNING insufficient entropy at creation.
mainbus0 (root)
cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 16KB/32B 4-way L1 Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 Data cache
mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood
mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff: Marvell SoC Timer
mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General
Purpose I/O Port Interface
mvsocgpp0: 50 gpio pins
mvsocgpp0: interrupts 96..103, intr 35
mvsocgpp0: interrupts 104..111, intr 36
mvsocgpp0: interrupts 112..119, intr 37
mvsocgpp0: interrupts 120..127, intr 38
mvsocgpp0: interrupts 128..135, intr 39
mvsocgpp0: interrupts 136..143, intr 40
mvsocgpp0: interrupts 144..151, intr 41
mvsocgpp0: Data Out: 0x00000000
mvsocgpp0: Data Out Enable Control: 0xffffffff
mvsocgpp0: Data Blink Enable: 0x00000000
mvsocgpp0: Data In Polarity: 0x00000000
mvsocgpp0: Data In: 0x00000080
mvsocgpp0: Interrupt Cause: 0x00000000
mvsocgpp0: Interrupt Mask: 0x00000000
mvsocgpp0: Interrupt Level Mask: 0x00000000
mvsocgpp0: High Data Out: 0x000f0000
mvsocgpp0: High Data Out Enable Ctrl: 0xffffffff
mvsocgpp0: High Blink Enable: 0x00000000
mvsocgpp0: High Data In Polarity: 0x00000000
mvsocgpp0: High Data In: 0x0003f000
mvsocgpp0: High Interrupt Cause: 0x00000000
mvsocgpp0: High Interrupt Mask: 0x00000000
mvsocgpp0: High Interrupt Level Mask: 0x00000000
gpio0 at mvsocgpp0: 50 pins
mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
ehci0 at mvsoc0 unit 0 offset 0x50000-0x51fff irq 19: Marvell USB 2.0 Interface
usb0 at ehci0: USB revision 2.0
gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR
Engine
gtidmac0: XOR Engine 4 channels, intr 5...8
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
iic0 at gttwsi0: I2C bus
mvcesa0 at mvsoc0 unit 0 offset 0x30000-0x3ffff irq 22: Marvell Cryptographic
Engines and Security Accelerator
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet
Controller
mvgbe0 at mvgbec0 port 0 irq 11
mvgbe0: Ethernet address 00:50:43:01:85:d4
ukphy0 at mvgbe0 phy 0: Marvell 88E1149 Gigabit PHY (OUI 0x000ac2, model
0x000b), rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet
Controller
mvgbe1 at mvgbec1 port 0 irq 15
mvgbe1: Ethernet address 00:50:43:01:85:d5
ukphy1 at mvgbe1 phy 1: Marvell 88E1149 Gigabit PHY (OUI 0x000ac2, model
0x000b), rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express
Interface
pci0 at mvpex0
vendor 0x11ab product 0x6281 (miscellaneous memory, revision 0x03) at pci0 dev
0 function 0 not configured
mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA
Host Controller (SATAHC)
mvsata0: GenIIe, 1hc, 2port/hc
atabus0 at mvsata0 channel 0
atabus1 at mvsata0 channel 1
mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital
Input/Output Interface
sdmmc0 at mvsdio0
uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
sdmmc0: bad CIS ptr 0
sdmmc0: couldn't read CIS
sdmmc0: i/o init failed
sdmmc0: bad CIS ptr 0
sdmmc0: couldn't read CIS
sdmmc0: i/o init failed
"Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0
function 1 not configured
"Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0
function 2 not configured
uhub1 at uhub0 port 1: Genesys Logic USB2.0 Hub, class 9/0, rev 2.00/77.60,
addr 2
uhub1: single transaction translator
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: Genesys Logic USB Storage, rev 2.00/99.09, addr 3
scsibus0 at umass0: 2 targets, 2 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 9909> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <Generic, STORAGE DEVICE, 9909> disk removable
sd1: drive offline
sd1: unable to open device, error = 19
cprng sysctl: WARNING insufficient entropy at creation.
boot device: <unknown>
root device:
use one of: mvgbe0 mvgbe1 sd0[a-h] sd1[a-h] ddb halt reboot
root device: reboot
syncing disks... done
unmounting file systems...
unmounting done
rebooting...
Script done on Sat Feb 9 11:01:03 2013
Home |
Main Index |
Thread Index |
Old Index