Re: install/47021: 6.0 RC2 sysinst not find any hard disks on Powermac G3 B&W

[sadirux <sadirux%goja.fr@localhost>]

The following reply was made to PR port-macppc/47021; it has been noted by 
GNATS.

From: sadirux <sadirux%goja.fr@localhost>
To: <gnats-bugs%netbsd.org@localhost>
Cc: 
Subject: Re: install/47021: 6.0 RC2 sysinst  not find any hard disks on
 Powermac G3 B&W
Date: Mon, 01 Oct 2012 22:06:15 +0200

 Hi,
 
 This is my dmesg output from NetBSD 6.0RC2 and 5.1 Install. As you can 
 see, the netbsd 6.0 cd won't boot on my powermac G3, i need send another 
 bug report for this point. To boot netbsd 6.0RC2 install process, I 
 copied ofwboot.xcf and netbsd files from cd to an Apple_HFS volume.
 
 Best regard,
 Sadirux
 
 ###### DMESG - NETBSD 6.0RC2 - ofwboot.xcf netbsd - POWERMAC G3 B&W 
 rev1 ######
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 
 2005,
      2006, 2007, 2008, 2009, 2010, 2011, 2012
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.0_RC2 (INSTALL)
 total memory = 512 MB
 avail memory = 491 MB
 timecounter: Timecounters tick every 10.000 msec
 found heathrow PIC at 80800000
 bootpath: /pci/@d/pci-ata@1/ata-4@0/disk@0:7,/netbsd6
 mainbus0 (root)
 cpu0 at mainbus0: 750 (Revision 2.1), ID 0 (primary)
 cpu0: HID0 0x8050c0a4<EMCP,NAP,DPM,ICE,DCE,SGE,BTIC,BHT>, powersave: 1
 cpu0: 300.00 MHz, no-parity 512KB WT L2 cache (PB SRAM) at 2:1 ratio
 grackle0 at mainbus0
 pci0 at grackle0 bus 0
 pci0: i/o space, memory space enabled
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x1057 product 0x0002 (rev. 0x40)
 pchb0: L2 cache: 256K, uniprocessor/none mode
 ppb0 at pci0 dev 13 function 0: vendor 0x1011 product 0x0026 (rev. 
 0x02)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vendor 0x104c product 0x8000 (Firewire serial bus, revision 0x02) at 
 pci1 dev 0 function 0 not configured
 cmdide0 at pci1 dev 1 function 0: CMD Technology PCI0646 (rev. 0x05)
 cmdide0: bus-master DMA support present, but unused (couldn't map 
 registers)
 cmdide0: primary channel configured to native-PCI mode
 cmdide0: using irq 26 for native-PCI interrupt
 cmdide0: couldn't map primary channel cmd regs
 cmdide0: secondary channel configured to native-PCI mode
 cmdide0: secondary channel ignored (disabled)
 vendor 0x109e product 0x036e (video multimedia, revision 0x11) at pci1 
 dev 2 function 0 not configured
 vendor 0x109e product 0x0878 (miscellaneous multimedia, revision 0x11) 
 at pci1 dev 2 function 1 not configured
 obio0 at pci1 dev 5 function 0: addr 0x80800000
 mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
 scsibus0 at mesh0: 8 targets, 8 luns per target
 mesh0: couldn't establish power handler
 zsc0 at obio0 irq 15,16
 zstty0 at zsc0 channel 0
 zstty1 at zsc0 channel 1
 davbus at obio0 offset 0x14000 not configured
 fdc at obio0 offset 0x15000 not configured
 cuda0 at obio0 offset 0x16000 irq 18
 nadb0 at cuda0: Apple Desktop Bus
 iic at cuda0 not configured
 wdc0 at obio0 offset 0x20000 irq 13, edge triggered: DMA transfer
 atabus0 at wdc0 channel 0
 bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:c9:d8:f1
 lxtphy0 at bm0 phy 0: LXT970 10/100 media interface, rev. 1
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 nvram0 at obio0 offset 0x60000
 ohci0 at pci1 dev 6 function 0: vendor 0x1045 product 0xc861 (rev. 
 0x10)
 ohci0: interrupting at irq 28
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 genfb0 at pci0 dev 16 function 0: vendor 0x1002 product 0x5245 (rev. 
 0x00)
 genfb0: framebuffer at 0x88000000, size 1280x1024, depth 8, stride 1280
 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 drm at genfb0 not configured
 vmmask 7fc00000 schedmask 7fc00000 highmask 7fc00000
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "mftb" frequency 25000000 Hz quality 100
 scsibus0: waiting 2 seconds for devices to settle...
 uhub0 at usb0: vendor 0x1045 OHCI root hub, class 9/0, rev 1.00/1.00, 
 addr 1
 uhub0: 2 ports with 2 removable, self powered
 atapibus0 at atabus0: 2 targets
 cd0 at atapibus0 drive 0: <MATSHITA CR-587, , 7S14> cdrom removable
 cd0: drive supports PIO mode 4, DMA mode 2
 cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
 uhub1 at uhub0 port 1: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, 
 addr 2
 uhub1: 4 ports with 4 removable, self powered
 uhidev0 at uhub1 port 1 configuration 1 interface 0
 uhidev0: Logitech USB Receiver, rev 1.10/38.10, addr 3, iclass 3/1
 ukbd0 at uhidev0
 wskbd0 at ukbd0: console keyboard, using wsdisplay0
 uhidev1 at uhub1 port 1 configuration 1 interface 1
 uhidev1: Logitech USB Receiver, rev 1.10/38.10, addr 3, iclass 3/1
 uhidev1: 17 report ids
 uhid at uhidev1 reportid 2 not configured
 uhid at uhidev1 reportid 3 not configured
 uhid at uhidev1 reportid 4 not configured
 uhid at uhidev1 reportid 16 not configured
 uhid at uhidev1 reportid 17 not configured
 uhidev2 at uhub1 port 3 configuration 1 interface 0
 uhidev2: No brand SP02-A1, rev 1.10/1.00, addr 4, iclass 3/0
 ukbd1 at uhidev2
 wskbd1 at ukbd1 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev3 at uhub1 port 3 configuration 1 interface 1
 uhidev3: No brand SP02-A1, rev 1.10/1.00, addr 4, iclass 3/0
 uhidev3: no input interrupt endpoint
 Kernelized RAIDframe activated
 boot device: <unknown>
 md0: internal 2112 KB image area
 root on md0a dumps on md0b
 root file system type: ffs
 WARNING: clock gained 13 days
 
 
 ###### DMESG - NETBSD 5.1 INSTALL - POWERMAC G3 B&W rev1 ######
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 
 2005,
      2006, 2007, 2008, 2009, 2010
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 5.1 (INSTALL) #0: Sat Nov  6 17:08:06 UTC 2010
        
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/macppc/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/macppc/compile/INSTALL
 total memory = 512 MB
 avail memory = 491 MB
 timecounter: Timecounters tick every 10.000 msec
 found heathrow PIC at 80800000
 bootpath: /pci/@d/mac-io/ata-3@20000/disk@0:0/netbsd.macppc
 mainbus0 (root)
 cpu0 at mainbus0: 750 (Revision 2.1), ID 0 (primary)
 cpu0: HID0 8090c0a4<EMCP,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>, powersave: 1
 cpu0: 300.00 MHz, no-parity 512KB WT L2 cache (PB SRAM) at 2:1 ratio
 grackle0 at mainbus0
 pci0 at grackle0 bus 0
 pci0: i/o space, memory space enabled
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x1057 product 0x0002 (rev. 0x40)
 pchb0: L2 cache: 256K, uniprocessor/none mode
 ppb0 at pci0 dev 13 function 0: vendor 0x1011 product 0x0026 (rev. 
 0x02)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vendor 0x104c product 0x8000 (Firewire serial bus, revision 0x02) at 
 pci1 dev 0 function 0 not configured
 cmdide0 at pci1 dev 1 function 0
 cmdide0: CMD Technology PCI0646 (rev. 0x05)
 cmdide0: bus-master DMA support present
 cmdide0: primary channel configured to native-PCI mode
 cmdide0: using irq 26 for native-PCI interrupt
 atabus0 at cmdide0 channel 0
 cmdide0: secondary channel configured to native-PCI mode
 cmdide0: secondary channel ignored (disabled)
 vendor 0x109e product 0x036e (video multimedia, revision 0x11) at pci1 
 dev 2 function 0 not configured
 vendor 0x109e product 0x0878 (miscellaneous multimedia, revision 0x11) 
 at pci1 dev 2 function 1 not configured
 obio0 at pci1 dev 5 function 0: addr 0x80800000
 mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
 scsibus0 at mesh0: 8 targets, 8 luns per target
 zsc0 at obio0 irq 15,16
 zstty0 at zsc0 channel 0
 zstty1 at zsc0 channel 1
 davbus at obio0 offset 0x14000 not configured
 fdc at obio0 offset 0x15000 not configured
 cuda0 at obio0 offset 0x16000 irq 18
 nadb0 at cuda0: Apple Desktop Bus
 iic at cuda0 not configured
 wdc0 at obio0 offset 0x20000 irq 13, edge triggered: DMA transfer
 atabus1 at wdc0 channel 0
 bm0 at obio0 offset 0x11000 irq 42,33: address 00:05:02:c9:d8:f1
 lxtphy0 at bm0 phy 0: LXT970 10/100 media interface, rev. 1
 lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 nvram0 at obio0 offset 0x60000
 ohci0 at pci1 dev 6 function 0: vendor 0x1045 product 0xc861 (rev. 
 0x10)
 ohci0: interrupting at irq 28
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 genfb0 at pci0 dev 16 function 0: vendor 0x1002 product 0x5245
 genfb0: framebuffer at 0x88000000, size 1280x1024, depth 8, stride 1280
 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 drm at genfb0 not configured
 biomask 80003fe netmask 80003fe ttymask 80003fe
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "mftb" frequency 25000000 Hz quality 100
 scsibus0: waiting 2 seconds for devices to settle...
 wd0 at atabus0 drive 0uhub0 at usb0: vendor 0x1045 OHCI root hub, class 
 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 : <HDT722516DLAT80>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 
 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
 (Ultra/133)
 wd0(cmdide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
 DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <MATSHITA CR-587, , 7S14> cdrom removable
 cd0: drive supports PIO mode 4, DMA mode 2
 cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
 uhub1 at uhub0 port 1: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, 
 addr 2
 uhub1: 4 ports with 4 removable, self powered
 uhidev0 at uhub1 port 1 configuration 1 interface 0
 uhidev0: Logitech USB Receiver, rev 1.10/38.10, addr 3, iclass 3/1
 ukbd0 at uhidev0
 wskbd0 at ukbd0: console keyboard, using wsdisplay0
 uhidev1 at uhub1 port 1 configuration 1 interface 1
 uhidev1: Logitech USB Receiver, rev 1.10/38.10, addr 3, iclass 3/1
 uhidev1: 17 report ids
 uhid at uhidev1 reportid 2 not configured
 uhid at uhidev1 reportid 3 not configured
 uhid at uhidev1 reportid 4 not configured
 uhid at uhidev1 reportid 16 not configured
 uhid at uhidev1 reportid 17 not configured
 uhidev2 at uhub1 port 3 configuration 1 interface 0
 uhidev2: No brand SP02-A1, rev 1.10/1.00, addr 4, iclass 3/0
 ukbd1 at uhidev2
 wskbd1 at ukbd1 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev3 at uhub1 port 3 configuration 1 interface 1
 uhidev3: No brand SP02-A1, rev 1.10/1.00, addr 4, iclass 3/0
 uhidev3: no input interrupt endpoint
 md0: internal 2048 KB image area
 Kernelized RAIDframe activated
 boot device: <unknown>
 root on md0a dumps on md0b
 root file system type: ffs
 WARNING: clock gained 695 days
 WARNING: CHECK AND RESET THE DATE!
 
 
 
 
 
 ---
 (envoyé depuis un webmail libre)
 
 Le 2012-10-01 00:55, David Holland a écrit :
 > The following reply was made to PR port-macppc/47021; it has been
 > noted by GNATS.
 >
 > From: David Holland <dholland-bugs%netbsd.org@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc:
 > Subject: Re: install/47021: 6.0 RC2 sysinst  not find any hard disks 
 > on
 >  Powermac G3 B&W
 > Date: Sun, 30 Sep 2012 22:50:32 +0000
 >
 >  On Sun, Sep 30, 2012 at 04:10:01PM +0000, sadirux%goja.fr@localhost wrote:
 >   > NetBSD 6.0RC1 and RC2
 >   > Sysinst not find any hard drive on my Powermac G3 blue and white
 >   > rev1 (yosemite), it's a internal IDE Hard drive.
 >   >
 >   > It's work with NetBSD 5.2, the device is view as /dev/wd0c
 >
 >  It would be helpful to see the dmesg output, I think.
 >
 >  --
 >  David A. Holland
 >  dholland%netbsd.org@localhost