kern/46386: BCM57781 doesn't connect to the network on Asrock X79 Extreme4-M motherboard

[vezhlys%gmail.com@localhost]

>Number:         46386
>Category:       kern
>Synopsis:       BCM57781 doesn't connect to the network on Asrock X79 
>Extreme4-M motherboard
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Apr 27 23:05:00 +0000 2012
>Originator:     Andrius Varanavicius
>Release:        NetBSD 6.0_BETA
>Organization:
>Environment:
NetBSD agraphic2.VIDANDRIUS 6.0_BETA NetBSD 6.0_BETA (GENERIC) amd64
>Description:
Broadcom BCM57781 NIC doesn't connect to the network on Asrock X79 Extreme4-M 
motherboard. NetBSD configures bge0 device but there is the
line that ASIC is unknown (bge0: ASIC unknown BCM57765 (0x57785100))
and network just doesn't work (DHCP doesn't assign any IP address,
manual configuration doesn't help too). The same NIC works on FreeBSD and Linux 
(Fedora 16).

NetBSD dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007, 2008, 2009, 2010, 2011, 2012
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC)
total memory = 8144 MB
avail memory = 7892 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu1 at mainbus0 apid 2: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu2 at mainbus0 apid 4: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu3 at mainbus0 apid 6: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu4 at mainbus0 apid 1: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu5 at mainbus0 apid 3: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu6 at mainbus0 apid 5: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu7 at mainbus0 apid 7: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfec01000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
IOH (PNP0C01) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
PCH (PNP0C01) at acpi0 not configured
CWDT (INT3F0D) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
PTMD (INT3394) at acpi0 not configured
SCK0 (ACPI0004) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x02)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x02)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x02)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x1002 product 0x9588 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon HD 2600 XT
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci2 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic1 pin 12
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 48000Hz PCM16 AC3
ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x02)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x3c28 (miscellaneous system, revision 0x02) at
pci0 dev 5 function 0 not configured
vendor 0x8086 product 0x3c2a (miscellaneous system, revision 0x02) at
pci0 dev 5 function 2 not configured
vendor 0x8086 product 0x3c2c (interrupt system, interface 0x20,
revision 0x02) at pci0 dev 5 function 4 not configured
ppb3 at pci0 dev 17 function 0: vendor 0x8086 product 0x1d3e (rev. 0x05)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1d3a (miscellaneous communications, revision
0x05) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg1 at hdaudio1: Realtek product 0899
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16
PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
ppb4 at pci0 dev 28 function 0: vendor 0x8086 product 0x1d10 (rev. 0xb5)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 1: vendor 0x8086 product 0x1d12 (rev. 0xb5)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1b21 product 0x1042 (USB serial bus, interface 0x30) at pci6
dev 0 function 0 not configured
ppb6 at pci0 dev 28 function 2: vendor 0x8086 product 0x1d14 (rev. 0xb5)
ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci7 dev 0 function 0: Broadcom BCM57781 Fast Ethernet
bge0: interrupting at ioapic0 pin 18
bge0: adjust device control 0x192c00 -> 0x195c00
bge0: ASIC unknown BCM57765 (0x57785100), Ethernet address bc:5f:f4:0e:84:25
bge0: setting short Tx thresholds
ukphy0 at bge0 phy 1: OUI 0x001be9, model 0x0024, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb7 at pci0 dev 28 function 3: vendor 0x8086 product 0x1d16 (rev. 0xb5)
ppb7: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0 at pci8 dev 0 function 0: vendor 0x1106 product 0x3403 (rev. 0x01)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:8f:13:00:a6:8f:10:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ppb8 at pci0 dev 28 function 4: vendor 0x8086 product 0x1d18 (rev. 0xb5)
ppb8: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1b21 product 0x1042 (USB serial bus, interface 0x30) at pci9
dev 0 function 0 not configured
ppb9 at pci0 dev 28 function 5: vendor 0x8086 product 0x1d1a (rev. 0xb5)
ppb9: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci10 dev 0 function 0: vendor 0x1b21 product 0x0612 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 17
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP
0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1d26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb10 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1d41 (rev. 0x05)
ahcisata1 at pci0 dev 31 function 2: vendor 0x8086 product 0x1d02 (rev. 0x05)
ahcisata1: interrupting at ioapic0 pin 19
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.30, 6 ports, 32 slots, CAP
0xe7309f45<EMS,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus2 at ahcisata1 channel 0
atabus3 at ahcisata1 channel 1
atabus4 at ahcisata1 channel 2
atabus5 at ahcisata1 channel 3
atabus6 at ahcisata1 channel 4
atabus7 at ahcisata1 channel 5
vendor 0x8086 product 0x1d22 (SMBus serial bus, revision 0x05) at pci0
dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: failed to evaluate _TSS: AE_LIMIT
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat  10 us, pow 130000 mW, 3001 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 130000 mW, 3000 MHz
acpicpu0: P2: FFH, lat  10 us, pow 123381 mW, 2900 MHz
acpicpu0: P3: FFH, lat  10 us, pow 113032 mW, 2700 MHz
acpicpu0: P4: FFH, lat  10 us, pow 106760 mW, 2600 MHz
acpicpu0: P5: FFH, lat  10 us, pow 101837 mW, 2500 MHz
acpicpu0: P6: FFH, lat  10 us, pow 97028 mW, 2400 MHz
acpicpu0: P7: FFH, lat  10 us, pow 86460 mW, 2200 MHz
acpicpu0: P8: FFH, lat  10 us, pow 81920 mW, 2100 MHz
acpicpu0: P9: FFH, lat  10 us, pow 76313 mW, 2000 MHz
acpicpu0: P10: FFH, lat  10 us, pow 67723 mW, 1800 MHz
acpicpu0: P11: FFH, lat  10 us, pow 62437 mW, 1700 MHz
acpicpu0: P12: FFH, lat  10 us, pow 58367 mW, 1600 MHz
acpicpu0: P13: FFH, lat  10 us, pow 54383 mW, 1500 MHz
acpicpu0: P14: FFH, lat  10 us, pow 45621 mW, 1300 MHz
acpicpu0: P15: FFH, lat  10 us, pow 41904 mW, 1200 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu1: failed to evaluate _TSS: AE_LIMIT
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu2: failed to evaluate _TSS: AE_LIMIT
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
acpicpu3: failed to evaluate _TSS: AE_LIMIT
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
acpicpu4: failed to evaluate _TSS: AE_LIMIT
acpicpu5 at cpu5: ACPI CPU
acpicpu5: failed to evaluate _TSS: AE_LIMIT
acpicpu6 at cpu6: ACPI CPU
acpicpu6: failed to evaluate _TSS: AE_LIMIT
acpicpu7 at cpu7: ACPI CPU
acpicpu7: failed to evaluate _TSS: AE_LIMIT
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata1 port 0: device present, speed: 3.0Gb/s
ahcisata1 port 1: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0
wd0: <ST9250410AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
atapibus0 at atabus3: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GH22NS40, K5I98JK5513,
NL01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata1:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev
2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev
2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: ENE Flash UB623X, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader CF, 0100> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <USB2.0, CardReader SM XD, 0100> disk removable
sd1: drive offline
sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <USB2.0, CardReader MS, 0100> disk removable
sd2: drive offline
sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <USB2.0, CardReader SD, 0100> disk removable
umass1 at uhub2 port 3 configuration 1 interface 0
umass1: vendor 0x13fe silicon-power, rev 2.00/1.10, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd3: fabricating a geometry
sd3: 1938 MB, 1938 cyl, 64 head, 32 sec, 512 bytes/sect x 3970048 sectors
sd3: fabricating a geometry
sd4 at scsibus1 target 0 lun 0: <, silicon-power, PMAP> disk removable
sd4: 3822 MB, 7644 cyl, 32 head, 32 sec, 512 bytes/sect x 7827456 sectors
uhub3: device problem, disabling port 3
uhidev0 at uhub3 port 4 configuration 1 interface 0
uhidev0: Kensington Kensington USB/PS2 Orbit, rev 1.10/4.00, addr 4, iclass 3/1
ums0 at uhidev0: 2 buttons
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
findroot: unable to read block 206612029 of dev sd3 (22)
findroot: unable to read block 206612029 of dev sd4 (22)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev1 at uhub3 port 3 configuration 1 interface 0
uhidev1: Dell Dell USB Keyboard, rev 1.10/3.01, addr 5, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RV630 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic1 pin 8
>How-To-Repeat:
Try to configure bge0 device on Asrock X79 Extreme4-M motherboard.
>Fix: