NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

kern/46100: NetBSD 6.0_BETA i386 iso boots fine, but fail out on some laptops



>Number:         46100
>Category:       kern
>Synopsis:       NetBSD 6.0_BETA i386 iso boots fine, but fail out on some 
>laptops
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Feb 26 13:15:00 +0000 2012
>Originator:     Fredrik Pettai
>Release:        NetBSD 6.0_BETA i386
>Organization:
NORDUnet
>Environment:
NetBSD frpet1n 6.0_BETA NetBSD 6.0_BETA (GENERIC) i386
>Description:
The iso image works on servers, but fails for me on certain laptops.
example below, a Acer Aspire One 751h 1545:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC)
total memory = 2038 MB
avail memory = 1991 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Acer             AO751h            (Not Applicable)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Atom(TM) CPU Z520   @ 1.33GHz, id 0x106c2
cpu1 at mainbus0 apid 1: Intel(R) Atom(TM) CPU Z520   @ 1.33GHz, id 0x106c2
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <ACRSYS,ACRPRDCT,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
ACPI Error: Could not enable PowerButton event (20110623/evxfevnt-216)
ACPI Warning: Could not enable fixed event 0x2 (20110623/evxface-223)
acpi0: failed to register fixed event 2: AE_NO_HARDWARE_RESPONSE
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0120): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: 10 20 30 40 50 60 70 80 90 100
acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0000): ACPI Display Output Device
acpiout3: brightness levels: 0 10 20 30 40 50 60 70 80 90 100
acpiout4 at acpivga0 (DD05, 0x0000): ACPI Display Output Device
acpiout4: brightness levels: 0 10 20 30 40 50 60 70 80 90 100
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0:   0x0120 (acpiout0): VGA Analog Monitor, index 0, port 2, head 0, 
bios detect
acpivga0:   0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head 
0, bios detect
npx1 at acpi0 (MATH, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1B20) (aux port): irq 12
acpitz0 at acpi0 (THRM): cpu0
acpitz0: levels: critical 95.0 C, passive 90.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x8100 (rev. 0x07)
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x8108 (rev. 0x07)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek ALC272
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: ADC02 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x8110 (rev. 0x07)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 
10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 00:23:8b:c9:c7:81
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x8112 (rev. 0x07)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci2 dev 0 function 0: Atheros 5424/2424
ath0: interrupting at ioapic0 pin 17
ath0: unable to attach hardware; HAL status 3
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x8114 (rev. 0x07)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x8115 (rev. 0x07)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x8116 (rev. 0x07)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x8117 (rev. 0x07)
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x8119 (rev. 0x07)
schide0 at pci0 dev 31 function 1: Intel SCH IDE Controller (rev. 0x07)
schide0: bus-master DMA support present
schide0: primary channel wired to compatibility mode
schide0: primary channel interrupting at ioapic0 pin 14
atabus0 at schide0 channel 0
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  20 us, pow   500 mW
acpicpu0: C3: FFH, lat 100 us, pow   100 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 1333 MHz
acpicpu0: P1: FFH, lat  10 us, pow 25000 mW, 1067 MHz
acpicpu0: P2: FFH, lat  10 us, pow 16000 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS 
(20110623/dswload2-327)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog 
(20110623/psloop-254)
ACPI Error: Method parse/execution failed [\_SB_.BAT1.UBIF] (Node 0xc3624464), 
AE_ALREADY_EXISTS (20110623/psparse-560)
ACPI Error: Method parse/execution failed [\_SB_.BAT1._BIF] (Node 0xc3624424), 
AE_ALREADY_EXISTS (20110623/psparse-560)
ACPI: Marking method _BIF as Serialized because of AE_ALREADY_EXISTS error
acpibat0: failed to evaluate _BIF: AE_ERROR
ACPI: Marking method UBIF as Serialized because of AE_ALREADY_EXISTS error
acpibat0: SIMPLO LION rechargeable battery
acpibat0: granularity: low->warn 0.032 Ah, warn->full 0.032 Ah
uvideo0 at uhub3 port 4 configuration 1 interface 0: SuYin WebCam, rev 
2.00/2.22, addr 2
video0 at uvideo0: SuYin WebCam, rev 2.00/2.22, addr 2
ehci0: handing over full speed device on port 5 to uhci2
wd0 at atabus0 drive 0
wd0: <ST9160310AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(schide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
uhso0 at uhub3 port 8
uhso0: Option N.V. Globetrotter HSUPA Modem, rev 2.00/0.00, addr 3
uhso0: Diagnostic (port 1) attached as bulk tty
uhso0: Application (port 3) attached as bulk tty
uhso0: Control (port 0) attached as bulk tty
uhso0: Network (port 11) attached as ifnet
uhso0: Modem (port 8) attached as bulk tty
Kernelized RAIDframe activated
boot device: sd0
root on wd0a dumps on sd0b
root file system type: ffs
warning: no /dev/console
exec /sbin/init: error 13
init: trying /sbin/oinit
exec /sbin/oinit: error 2
init: trying /sbin/init.bak
exex /sbin/init.bak: error 2
ubt0: Broadcom Corp Acer Module, rev 2.00/1.00, addr 2

(here it halts)

Pressing <ENTER> give the message:

pckbport_start: command error


>How-To-Repeat:
Just boot the NetBSD 6.0_BETA generated iso on a laptop that has this problem.
The laptop I use is a Acer Aspire One 751h 1545
>Fix:
WORKAROUND:
Boot works fine any NetBSD 5.x release iso's, so I used a 5.1.2 ISO to install 
NetBSD 5.1.2, and then upgrade to NetBSD 6.0_BETA by building from source. Once 
the NetBSD 6.0_BETA kernel boots from the internal disk, it works fine...



Home | Main Index | Thread Index | Old Index