Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot

["Martin S. Weber" <Ephaeton%gmx.net@localhost>]

The following reply was made to PR port-i386/46061; it has been noted by GNATS.

From: "Martin S. Weber" <Ephaeton%gmx.net@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: port-i386/46061: NetBSD 6.0 does not boot: instant reboot
Date: Tue, 21 Feb 2012 20:08:14 -0500

 More info: I successfully booted with a NetBSD 6.0/amd64 kernel off the
 netbsd-6 branch of the same source date as the N6/i386 one that's failing.
 I did not (have to) update the boot code to boot this kernel successfully.
 
 I booted with "-vx" as arguments. Here's the dmesg of that successful
 boot (maybe it helps shed some light?)
 
 -Martin
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.0_BETA (GENERIC) #0: Tue Feb 21 19:07:13 EST 2012
        
root@agamemnon.entropie.local:/space/obj-amd64/sys/arch/amd64/compile/GENERIC
 total memory = 3046 MB
 avail memory = 2942 MB
 timecounter: Timecounters tick every 10.000 msec
 No bootinfo commands at boot
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 SMBIOS rev. 2.4 @ 0xe0010 (73 entries)
 LENOVO 7658CTO (ThinkPad T61)
 mainbus0 (root)
 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110623/tbfadt-556)
 ACPI Warning: Optional field Gpe1Block has zero address or length: 
0x000000000000102C/0x0 (20110623/tbfadt-586)
 cpu0 at mainbus0 apid 0cpu0: 64 page colors
 cpu0: calibrating local timer
 cpu0: apic clock running at 199 MHz
 timecounter: Timecounter "lapic" frequency 199644492 Hz quality -100
 : Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz, id 0x10676
 cpu0: PAT enabled
 cpu1 at mainbus0 apid 1cpu1: 2 page colors
 x86_ipi_init: ESR 00000040
 : Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz, id 0x10676
 cpu1: PAT enabled
 ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
 ioapic0: misconfigured as apic 2
 ioapic0: remapped to apic 1
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <LENOVO,TP-7L   ,00002260>, AslId < LTP,00000000>
 acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
 acpi0: SCI interrupting at int 9
 acpi0: fixed power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 acpi0: ACPI-Fast 24-bit timer
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
 MEM (PNP0C01) at acpi0 not configured
 acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
 acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
 SIO (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
 pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
 acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
 acpibat0: SANYO LION rechargeable battery
 acpibat0: model number 42T5262, serial number 10603
 acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
 acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
 thinkpad0 at acpi0 (HKEY, IBM0068)
 thinkpad0: using EC at acpiecdt0
 acpivga0 at acpi0 (VID): ACPI Display Adapter
 acpivga0: capabilities: _DOS _DOD
 acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
 acpiout0: capabilities: _BCL _BCM _BQC _DCS _DGS _DSS
 acpiout0: brightness levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100
 acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
 acpiout1: capabilities: _DCS _DGS _DSS
 acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
 acpiout2: capabilities: _DCS _DGS _DSS
 acpivga0: connected output devices:
 acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0
 acpivga0:   0x0300 (acpiout2): Unknown Output Device, head 0
 acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0
 acpiwmi0 at acpi0 (WMI0, PNP0C14-NVIF): ACPI WMI Interface
 acpiwmi0: {A1799AF2-9429-4529-927E-DFE13736EEBA} oid 4241 count 01 flags 02
 acpiwmi0: {05901221-D566-11D1-B2F0-00A0C9062910} oid 4142 count 01 flags 00
 acpiwmi0: {A1799AC3-9429-4529-927E-DFE13736EEBA} oid 00C3 count 00 flags 08
 acpiwmi0: {A1799AC5-9429-4529-927E-DFE13736EEBA} oid 00C5 count 00 flags 08
 acpiwmi0: {A1799ACA-9429-4529-927E-DFE13736EEBA} oid 00CA count 00 flags 08
 acpiwmi0: failed to enable expensive WExx: AE_NOT_FOUND
 acpiwmi0: failed to enable expensive WExx: AE_NOT_FOUND
 acpiwmi0: failed to enable expensive WExx: AE_NOT_FOUND
 acpiwmibus at acpiwmi0 not configured
 acpitz0 at acpi0 (THM0)
 acpitz0: polling interval 30.0 seconds
 acpitz0: levels: critical 127.0 C, passive cooling
 acpitz1 at acpi0 (THM1): cpu0 cpu1
 acpitz1: polling interval 30.0 seconds
 acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pms0: Synaptics touchpad version 6.2
 pms0: synaptics_probe: Capabilities 0xa091.
 pms0: synaptics_probe: Extended Capabilities 0x00.
 pms0: Passthrough, Palm detect
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x0c)
 agp0 at pchb0: detected 7676k stolen memory
 agp0: aperture at 0xe0000000, size 0x20000000
 vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 i915drm0 at vga0pci_mem_find: void region
 : Intel i965GM
 i915drm0: AGP at 0xe0000000 256MB
 i915drm0: Initialized i915 1.6.0 20080730
 vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 
dev 2 function 1 not configured
 vendor 0x8086 product 0x2a04 (miscellaneous communications, revision 0x0c) at 
pci0 dev 3 function 0 not configured
 piixide0 at pci0 dev 3 function 2: Intel 82965PM IDE controller (rev. 0x0c)
 piixide0: I/O access disabled at device
 vendor 0x8086 product 0x2a07 (serial communications, interface 0x02, revision 
0x0c) at pci0 dev 3 function 3 not configured
 wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller (rev. 0x03)
 wm0: interrupting at ioapic0 pin 20
 wm0: PCI-Express bus
 wm0: FLASH
 wm0: Ethernet address 00:21:86:56:09:ee
 igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
 uhci0: interrupting at ioapic0 pin 20
 usb0 at uhci0: USB revision 1.0
 usb0: WARNING: power management not supported
 uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
 uhci1: interrupting at ioapic0 pin 21
 usb1 at uhci1: USB revision 1.0
 usb1: WARNING: power management not supported
 ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
 ehci0: interrupting at ioapic0 pin 22
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1
 usb2 at ehci0: USB revision 2.0
 usb2: WARNING: power management not supported
 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio0: interrupting at ioapic0 pin 17
 hdafg0 at hdaudio0 vendor 0x11D4 product 0x1984 nid 0x01: ADI AD1984
 hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
     nid=12 [pin: Speaker (Built-In)]
            nid=0A [audio mixer] [source: dac, record]
                   nid=04 [audio output] [source: dac]
                   nid=21 [audio selector] [source: record]
                          nid=20 [audio mixer] [source: record]
     nid=11 [pin: HP Out (Green Jack)]
            nid=07 [audio mixer] [source: dac, record]
                   nid=22 [audio selector] [source: dac]
                          nid=04 [audio output] [source: dac]
                   nid=21 [audio selector] [source: record]
                          nid=20 [audio mixer] [source: record]
 hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
     nid=1C [pin: Mic In (Red Jack)]
     nid=14 [pin: Mic In (Red Jack)]
     nid=15 [pin: Mic In (Built-In)]
 hdafg0: DIG02 2ch: SPDIF Out [Jack]
     nid=1B [pin: SPDIF Out (Black Jack)]
            nid=02 [audio output] [source: dac]
 hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 
96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg0: full duplex, playback, capture, independent
 hdvsmfg at hdaudio0 vendor 0x14F1 product 0x2BFA nid 0x02 not configured
 ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 2
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 3
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ath0 at pci2 dev 0 function 0: Atheros 5212
 ath0: interrupting at ioapic0 pin 17
 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
 ath0: mac 10.3 phy 6.1 radio 10.2
 ath0: Use hw queue 1 for WME_AC_BE traffic
 ath0: Use hw queue 0 for WME_AC_BK traffic
 ath0: Use hw queue 2 for WME_AC_VI traffic
 ath0: Use hw queue 3 for WME_AC_VO traffic
 ath0: Use hw queue 8 for CAB traffic
 ath0: Use hw queue 9 for beacons
 ath0: device_pmf_lock1.2379, swapper dvl_nlock 1 dvl_nwait 0 dv_flags 7
 ath0: device_pmf_unlock.2406, swapper dvl_nlock 0 dvl_nwait 0 dv_flags 3f
 ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x03)
 ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci3 at ppb2 bus 4
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x03)
 ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 ppb3: disabling notification events
 pci4 at ppb3 bus 5
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x03)
 ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci5 at ppb4 bus 13
 pci5: i/o space, memory space enabled, rd/line, wr/inv ok
 uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
 uhci2: interrupting at ioapic0 pin 16
 usb3 at uhci2: USB revision 1.0
 usb3: WARNING: power management not supported
 uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
 uhci3: interrupting at ioapic0 pin 17
 usb4 at uhci3: USB revision 1.0
 usb4: WARNING: power management not supported
 uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
 uhci4: interrupting at ioapic0 pin 18
 usb5 at uhci4: USB revision 1.0
 usb5: WARNING: power management not supported
 ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
 ehci1: interrupting at ioapic0 pin 19
 ehci1: EHCI version 1.0
 ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
 usb6 at ehci1: USB revision 2.0
 usb6: WARNING: power management not supported
 ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
 pci6 at ppb5 bus 21
 pci6: i/o space, memory space enabled
 cbb0 at pci6 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
 fwohci0 at pci6 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
 fwohci0: interrupting at ioapic0 pin 17
 fwohci0: OHCI version 1.10 (ROM=0)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:06:1b:03:2a:29:65:04
 fwohci0: Phy 1394a available S400, 1 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 sdhc0 at pci6 dev 0 function 2: vendor 0x1180 product 0x0822 (rev. 0x21)
 sdhc0: interrupting at ioapic0 pin 18
 sdmmc0 at sdhc0
 vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x11) at pci6 dev 
0 function 3 not configured
 vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x11) at pci6 dev 
0 function 4 not configured
 vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x11) at pci6 dev 
0 function 5 not configured
 cbb0: osock_ctrl 0x400 sock_ctrl 0x400
 cbb0: wait took 0.040033s
 cbb0: cacheline 0x8 lattimer 0x20
 cbb0: bhlc 0x822008
 cbb0: interrupting at ioapic0 pin 16
 cardslot0 at cbb0
 cardbus0 at cardslot0: bus 22 cacheline 0x8, lattimer 0x20
 pcmcia0 at cardslot0
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2811 (rev. 0x03)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide1 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) 
(rev. 0x03)
 piixide1: bus-master DMA support present
 piixide1: primary channel configured to compatibility mode
 piixide1: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide1 channel 0
 piixide1: secondary channel configured to compatibility mode
 piixide1: secondary channel ignored (disabled)
 ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829 (rev. 0x03)
 ahcisata0: interrupting at ioapic0 pin 16
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 
0xe710ff82<CCCS,PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
 atabus1 at ahcisata0 channel 0
 atabus2 at ahcisata0 channel 2
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
 ichsmb0: interrupting at ioapic0 pin 23
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x32031114 rev 0x9
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
 acpicpu0: C2: FFH, lat   1 us, pow   500 mW
 acpicpu0: C3: FFH, lat  17 us, pow   250 mW, bus master check
 acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2101 MHz, turbo boost
 acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2100 MHz
 acpicpu0: P2: FFH, lat  10 us, pow 24000 mW, 1600 MHz
 acpicpu0: P3: FFH, lat  10 us, pow 16000 mW, 1200 MHz
 acpicpu0: P4: FFH, lat  10 us, pow 14000 mW,  800 MHz
 acpicpu0: T0: FFH, lat   1 us, pow 14000 mW, 100 %
 acpicpu0: T1: FFH, lat   1 us, pow 12250 mW,  88 %
 acpicpu0: T2: FFH, lat   1 us, pow 10500 mW,  75 %
 acpicpu0: T3: FFH, lat   1 us, pow  8750 mW,  63 %
 acpicpu0: T4: FFH, lat   1 us, pow  7000 mW,  50 %
 acpicpu0: T5: FFH, lat   1 us, pow  5250 mW,  38 %
 acpicpu0: T6: FFH, lat   1 us, pow  3500 mW,  25 %
 acpicpu0: T7: FFH, lat   1 us, pow  1750 mW,  13 %
 acpicpu0: id 0, lapic id 0, cap 0x0bfd, flags 0x002aee97
 acpicpu0: P-state coordination: 2 CPUs, domain 0, type HW_ALL
 acpicpu0: T-state coordination: 1 CPUs, domain 0, type SW_ALL
 coretemp0 at cpu0: thermal sensor, 1 C resolution
 acpicpu1 at cpu1: ACPI CPU
 acpicpu1: id 1, lapic id 1, cap 0x0bfd, flags 0x002aee97
 acpicpu1: P-state coordination: 2 CPUs, domain 0, type HW_ALL
 acpicpu1: T-state coordination: 1 CPUs, domain 1, type SW_ALL
 coretemp1 at cpu1: thermal sensor, 1 C resolution
 fwohci0: BUS reset
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
 ieee1394if0: bus manager 0
 Initializing SSP: f00e8ea19534081e d75ac0c75f1438a0 e2a738320785bb6d 
334e82ee6248dc1d 2e530c34e14f67a2 3097b3e6622b97f0 8d86cd783d3adfd9 
4941372449a4b31 
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 cpu1: TSC skew=-347508 drift=-1
 TSC not known safe on this CPU
 timecounter: Timecounter "TSC" frequency 2094969560 Hz quality -100
 acpiacad0: AC adapter online.
 acpiacad0: AC adapter connected
 atapibus0 at atabus0: 2 targets
 cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-M10N, , 1.02> cdrom 
removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4uhub0 at usb0: vendor 0x8086 UHCI root hub, 
class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 4 ports with 4 removable, self powered
 uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5: 2 ports with 2 removable, self powered
 uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub6: 6 ports with 6 removable, self powered
 , DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 cpu1: running
 acpicpu1: ACPI CPUs started
 ahcisata0 port 0: device present, speed: 1.5Gb/s
 wd0 at atabus1 drive 0
 wd0: <WDC WD5000BEKT-75KA9T0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
 ehci0: handing over full speed device on port 3 to uhci1
 uhub2: port 3, device disappeared after reset
 uvideo0 at uhub6 port 5 configuration 1 interface 0: Chicony Electronics Co., 
Ltd. Integrated Camera, rev 2.00/3.20, addr 2
 video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev 
2.00/3.20, addr 2
 crypto: assign driver 0, flags 2
 crypto: driver 0 registers alg 1 flags 0 maxoplen 0
 crypto: driver 0 registers alg 2 flags 0 maxoplen 0
 crypto: driver 0 registers alg 3 flags 0 maxoplen 0
 crypto: driver 0 registers alg 4 flags 0 maxoplen 0
 crypto: driver 0 registers alg 5 flags 0 maxoplen 0
 crypto: driver 0 registers alg 26 flags 0 maxoplen 0
 crypto: driver 0 registers alg 27 flags 0 maxoplen 0
 crypto: driver 0 registers alg 29 flags 0 maxoplen 0
 crypto: driver 0 registers alg 33 flags 0 maxoplen 0
 crypto: driver 0 registers alg 17 flags 0 maxoplen 0
 crypto: driver 0 registers alg 6 flags 0 maxoplen 0
 crypto: driver 0 registers alg 19 flags 0 maxoplen 0
 crypto: driver 0 registers alg 7 flags 0 maxoplen 0
 crypto: driver 0 registers alg 20 flags 0 maxoplen 0
 crypto: driver 0 registers alg 15 flags 0 maxoplen 0
 crypto: driver 0 registers alg 24 flags 0 maxoplen 0
 crypto: driver 0 registers alg 25 flags 0 maxoplen 0
 crypto: driver 0 registers alg 8 flags 0 maxoplen 0
 crypto: driver 0 registers alg 21 flags 0 maxoplen 0
 crypto: driver 0 registers alg 16 flags 0 maxoplen 0
 crypto: driver 0 registers alg 9 flags 0 maxoplen 0
 crypto: driver 0 registers alg 10 flags 0 maxoplen 0
 crypto: driver 0 registers alg 13 flags 0 maxoplen 0
 crypto: driver 0 registers alg 14 flags 0 maxoplen 0
 crypto: driver 0 registers alg 28 flags 0 maxoplen 0
 crypto: driver 0 registers alg 30 flags 0 maxoplen 0
 crypto: driver 0 registers alg 31 flags 0 maxoplen 0
 crypto: driver 0 registers alg 32 flags 0 maxoplen 0
 crypto: driver 0 registers alg 11 flags 0 maxoplen 0
 crypto: driver 0 registers alg 18 flags 0 maxoplen 0
 crypto: driver 0 registers alg 23 flags 0 maxoplen 0
 crypto: driver 0 registers alg 22 flags 0 maxoplen 0
 raidattach: Asked for 8 units
 Kernelized RAIDframe activated
 pad: requested 1 units
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 Searching for RAID components...
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 uhub7 at uhub1 port 1: Cypress Semiconductor Combi keyboard Hub ref design 
V1.68, class 9/0, rev 1.10/0.01, addr 2
 uhub7: 3 ports with 2 removable, bus powered
 uhidev0 at uhub7 port 2 configuration 1 interface 0
 uhidev0: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/1
 ums0 at uhidev0: 16 buttons, W and Z dirs
 wsmouse1 at ums0 mux 0
 uhidev1 at uhub7 port 2 configuration 1 interface 1
 uhidev1: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/0
 uhidev1: 17 report ids
 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
 uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
 uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
 uhidev2 at uhub7 port 3 configuration 1 interface 0
 uhidev2: Solid Year product 0x2001, rev 1.10/0.01, addr 4, iclass 3/1
 ukbd0 at uhidev2: 8 modifier keys, 6 key codes
 wskbd1 at ukbd0 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev3 at uhub7 port 3 configuration 1 interface 1
 uhidev3: Solid Year product 0x2001, rev 1.10/0.01, addr 4, iclass 3/0
 uhidev3: 2 report ids
 uhid3 at uhidev3 reportid 1: input=3, output=0, feature=0
 uhid4 at uhidev3 reportid 2: input=1, output=0, feature=0