NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
xsrc/45100: The netbook's screen turns off when starting X on an Intel GMA 3150
>Number: 45100
>Category: xsrc
>Synopsis: The netbook's screen turns off when starting X on an Intel GMA
>3150
>Confidential: no
>Severity: critical
>Priority: medium
>Responsible: xsrc-manager
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sun Jun 26 09:20:00 +0000 2011
>Originator: M. Adriano
>Release: Current - Daily Binary Snapshot 201106251010Z
>Organization:
>Environment:
NetBSD 5.99.53 (GENERIC) #0: Sat Jun 25 15:51:31 UTC 2011
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201106251010Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
>Description:
I installed NetBSD current (201106251010Z) on a Netbook Samsung N150 was to
check on the compatibility of video, network and wireless network, in version
5.1 is impossible to configure or start X, the system crashes.
In the Current is possible to configure X without crashing, it detects the
correct driver for your video card Intel GMA 3150, but when trying to start the
graphical environment is a kind of crash where the screen is off and you can
not get out of this state. The keyboard works but apparently it is impossible
to know whether the system is receiving the entries.
Following is the result of dmesg (normal) and Xorg.0.log during a crash.
==== dmesg ====
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.53 (GENERIC) #0: Sat Jun 25 15:51:31 UTC 2011
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201106251010Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 1013 MB
avail memory = 984 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SAMSUNG ELECTRONICS CO., LTD. N150/N210/N220 (Not Applicable)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, id 0x106ca
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110211
acpi0: X/RSDT: OemId <SECCSD,LH43STAR,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): io 0x62,0x66
acpivga0 at acpi0 (IGD0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0320): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0410): ACPI Display Output Device
acpiout3: brightness levels: 7 15 24 30 45 60 80 100
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: acpiout3 has same device ID as acpiout1
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0,
bios detect
acpivga0: 0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head
0, bios detect
acpivga0: 0x0320 (acpiout2): Ext. Digital Monitor, index 0, port 2, head 0,
bios detect
acpivga0: 0x0410: Int. Digital Flat Panel, index 0, port 1, head 0, bios
detect
acpivga0: 0x0005 (acpiout4): Unknown Output Device, head 0, bios detect
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
MBRD (PNP0C02) at acpi0 not configured
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
FWH (INT0800) at acpi0 not configured
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpitz0 at acpi0 (TZ00): cpu0
acpitz0: levels: critical 98.0 C, passive 90.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0xa010 (rev. 0x00)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0xa011 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0xa012 (miscellaneous display) at pci0 dev 2 function 1
not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek ALC269
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz 16/16 20/32
24/32
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci1 dev 0 function 0: Atheros 9285
ath0: interrupting at ioapic0 pin 16
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: mac 192.2 phy 14.0 radio 12.0
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 7
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 9
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x11ab product 0x4354 (ethernet network) at pci3 dev 0 function 0 not
configured
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 11
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci5 at ppb4 bus 17
pci5: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27bc (rev. 0x02)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c1
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc720e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1667 MHz
acpicpu0: P1: FFH, lat 10 us, pow 1300 mW, 1333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 600 mW, 1000 MHz
acpicpu0: T0: FFH, lat 1 us, pow 600 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 525 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 450 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 375 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 300 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 225 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 150 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 75 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
acpivga0: acpiout3 has same device ID as acpiout1
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0,
bios detect
acpivga0: 0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port 1, head
0, bios detect
acpivga0: 0x0320 (acpiout2): Ext. Digital Monitor, index 0, port 2, head 0,
bios detect
acpivga0: 0x0410: Int. Digital Flat Panel, index 0, port 1, head 0, bios
detect
acpivga0: 0x0005 (acpiout4): Unknown Output Device, head 0, bios detect
acpilid0: lid opened.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 2: PHY offline
ahcisata0 port 3: PHY offline
wd0 at atabus0 drive 0
wd0: <SAMSUNG HM160HI>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
uvideo0 at uhub4 port 8 configuration 1 interface 0: Namuga. WebCam SCB-0340N,
rev 2.00/1.00, addr 2
video0 at uvideo0: Namuga. WebCam SCB-0340N, rev 2.00/1.00, addr 2
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
==== Xorg.0.log ====
[ 140.547]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 140.547] X Protocol Version 11, Revision 0
[ 140.547] Build Operating System: NetBSD/i386 -
[ 140.547] Current Operating System: NetBSD 5.99.53 NetBSD 5.99.53 (GENERIC)
#0: Sat Jun 25 15:51:31 UTC 2011
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201106251010Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
i386
[ 140.548] Build Date: 23 November 2010 01:33:05AM
[ 140.548]
[ 140.548] Current version of pixman: 0.21.4
[ 140.548] Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
[ 140.548] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 140.549] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 26 04:01:06
2011
[ 140.549] (==) Using config file: "/etc/X11/xorg.conf"
[ 140.550] (==) ServerLayout "X.org Configured"
[ 140.550] (**) |-->Screen "Screen0" (0)
[ 140.550] (**) | |-->Monitor "Monitor0"
[ 140.550] (**) | |-->Device "Card0"
[ 140.550] (**) |-->Input Device "Mouse0"
[ 140.550] (**) |-->Input Device "Keyboard0"
[ 140.550] (==) Not automatically adding devices
[ 140.550] (==) Not automatically enabling devices
[ 140.551] (**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/
[ 140.551] (**) ModulePath set to "/usr/X11R7/lib/modules"
[ 140.551] (II) Loader magic: 0x82277dc
[ 140.551] (II) Module ABI versions:
[ 140.551] X.Org ANSI C Emulation: 0.4
[ 140.551] X.Org Video Driver: 8.0
[ 140.551] X.Org XInput driver : 11.0
[ 140.551] X.Org Server Extension : 4.0
[ 140.563] (--) PCI:*(0:0:2:0) 8086:a011:144d:c072 rev 0, Mem @
0xf0300000/524288, 0xd0000000/268435456, 0xf0000000/1048576, I/O @ 0x000018d0/8
[ 140.563] (--) PCI: (0:0:2:1) 8086:a012:144d:c072 rev 0, Mem @
0xf0380000/524288
[ 140.564] (II) "extmod" will be loaded. This was enabled by default and also
specified in the config file.
[ 140.564] (II) "dbe" will be loaded. This was enabled by default and also
specified in the config file.
[ 140.564] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 140.564] (II) "record" will be loaded. This was enabled by default and also
specified in the config file.
[ 140.564] (II) "dri" will be loaded. This was enabled by default and also
specified in the config file.
[ 140.564] (II) "dri2" will be loaded. This was enabled by default and also
specified in the config file.
[ 140.564] (II) LoadModule: "dbe"
[ 140.567] (II) Loading /usr/X11R7/lib/modules/extensions/libdbe.so
[ 140.574] (II) Module dbe: vendor="X.Org Foundation"
[ 140.574] compiled for 1.9.2, module version = 1.0.0
[ 140.574] Module class: X.Org Server Extension
[ 140.574] ABI class: X.Org Server Extension, version 4.0
[ 140.574] (II) Loading extension DOUBLE-BUFFER
[ 140.574] (II) LoadModule: "dri"
[ 140.577] (II) Loading /usr/X11R7/lib/modules/extensions/libdri.so
[ 140.578] (II) Module dri: vendor="X.Org Foundation"
[ 140.578] compiled for 1.9.2, module version = 1.0.0
[ 140.578] ABI class: X.Org Server Extension, version 4.0
[ 140.589] (II) Loading extension XFree86-DRI
[ 140.589] (II) LoadModule: "dri2"
[ 140.592] (II) Loading /usr/X11R7/lib/modules/extensions/libdri2.so
[ 140.593] (II) Module dri2: vendor="X.Org Foundation"
[ 140.593] compiled for 1.9.2, module version = 1.2.0
[ 140.593] ABI class: X.Org Server Extension, version 4.0
[ 140.593] (II) Loading extension DRI2
[ 140.593] (II) LoadModule: "extmod"
[ 140.596] (II) Loading /usr/X11R7/lib/modules/extensions/libextmod.so
[ 140.601] (II) Module extmod: vendor="X.Org Foundation"
[ 140.611] compiled for 1.9.2, module version = 1.0.0
[ 140.611] Module class: X.Org Server Extension
[ 140.611] ABI class: X.Org Server Extension, version 4.0
[ 140.611] (II) Loading extension MIT-SCREEN-SAVER
[ 140.611] (II) Loading extension XFree86-VidModeExtension
[ 140.611] (II) Loading extension XFree86-DGA
[ 140.621] (II) Loading extension DPMS
[ 140.621] (II) Loading extension XVideo
[ 140.621] (II) Loading extension XVideo-MotionCompensation
[ 140.621] (II) Loading extension X-Resource
[ 140.621] (II) LoadModule: "glx"
[ 140.625] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 140.636] (II) Module glx: vendor="X.Org Foundation"
[ 140.636] compiled for 1.9.2, module version = 1.0.0
[ 140.636] ABI class: X.Org Server Extension, version 4.0
[ 140.636] (==) AIGLX enabled
[ 140.637] (II) Loading extension GLX
[ 140.637] (II) LoadModule: "record"
[ 140.640] (II) Loading /usr/X11R7/lib/modules/extensions/librecord.so
[ 140.646] (II) Module record: vendor="X.Org Foundation"
[ 140.646] compiled for 1.9.2, module version = 1.13.0
[ 140.646] Module class: X.Org Server Extension
[ 140.646] ABI class: X.Org Server Extension, version 4.0
[ 140.646] (II) Loading extension RECORD
[ 140.646] (II) LoadModule: "shadow"
[ 140.649] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[ 140.650] (II) Module shadow: vendor="X.Org Foundation"
[ 140.650] compiled for 1.9.2, module version = 1.1.0
[ 140.650] ABI class: X.Org ANSI C Emulation, version 0.4
[ 140.650] (II) LoadModule: "intel"
[ 140.652] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 140.653] (II) Module intel: vendor="X.Org Foundation"
[ 140.653] compiled for 1.9.2, module version = 2.7.1
[ 140.653] Module class: X.Org Video Driver
[ 140.654] ABI class: X.Org Video Driver, version 8.0
[ 140.654] (II) LoadModule: "mouse"
[ 140.655] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[ 140.656] (II) Module mouse: vendor="X.Org Foundation"
[ 140.656] compiled for 1.9.2, module version = 1.6.0
[ 140.656] Module class: X.Org XInput Driver
[ 140.656] ABI class: X.Org XInput driver, version 11.0
[ 140.656] (II) LoadModule: "kbd"
[ 140.658] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 140.658] (II) Module kbd: vendor="X.Org Foundation"
[ 140.658] compiled for 1.9.2, module version = 1.5.0
[ 140.658] Module class: X.Org XInput Driver
[ 140.658] ABI class: X.Org XInput driver, version 11.0
[ 140.658] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
[ 140.660] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode
(version 3.32)
[ 140.660] (--) using VT number 5
[ 140.668] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 140.668] (II) Loading sub module "vgahw"
[ 140.668] (II) LoadModule: "vgahw"
[ 140.677] (II) Loading /usr/X11R7/lib/modules/libvgahw.so
[ 140.689] (II) Module vgahw: vendor="X.Org Foundation"
[ 140.689] compiled for 1.9.2, module version = 0.1.0
[ 140.689] ABI class: X.Org Video Driver, version 8.0
[ 140.689] (II) Loading sub module "ramdac"
[ 140.689] (II) LoadModule: "ramdac"
[ 140.689] (II) Module "ramdac" already built-in
[ 140.690] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 140.690] (==) intel(0): RGB weight 888
[ 140.690] (==) intel(0): Default visual is TrueColor
[ 140.699] (II) intel(0): Integrated Graphics Chipset: Intel(R) IGD
[ 140.699] (--) intel(0): Chipset: "IGD"
[ 140.699] (--) intel(0): Linear framebuffer at 0xD0000000
[ 140.699] (--) intel(0): IO registers at addr 0xF0300000
[ 140.699] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[ 140.707] (==) intel(0): Using EXA for acceleration
[ 140.708] (II) intel(0): 2 display pipes available.
[ 140.708] (II) Loading sub module "ddc"
[ 140.708] (II) LoadModule: "ddc"
[ 140.708] (II) Module "ddc" already built-in
[ 140.708] (II) Loading sub module "i2c"
[ 140.708] (II) LoadModule: "i2c"
[ 140.708] (II) Module "i2c" already built-in
[ 140.723] (II) intel(0): Output VGA using monitor section Monitor0
[ 140.723] (II) intel(0): Output LVDS has no monitor section
[ 140.724] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[ 140.724] (II) intel(0): Attempting to determine panel fixed mode.
[ 140.724] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address
0xA0.
[ 140.729] (II) intel(0): EDID for output LVDS
[ 140.730] (WW) intel(0): remove MTRR a0000 - b0000
[ 140.801] (II) intel(0): Resizable framebuffer: not available (1 3)
[ 140.813] (II) intel(0): EDID for output VGA
[ 140.819] (II) intel(0): EDID for output LVDS
[ 140.819] (II) intel(0): Not using default mode "320x175" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "320x200" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "360x200" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 140.819] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1024x768i" (interlace mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "512x384i" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1024x768" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1024x768" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1024x768" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1024x768" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1152x864" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "576x432" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1280x960" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1280x960" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1280x1024" (exceeds panel
dimensions)
[ 140.820] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 140.820] (II) intel(0): Not using default mode "1280x1024" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1280x1024" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1600x1200" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1792x1344" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1792x1344" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1856x1392" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 140.821] (II) intel(0): Not using default mode "1856x1392" (exceeds panel
dimensions)
[ 140.821] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "1920x1440" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "1920x1440" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "832x624" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "416x312" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "1400x1050" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "1400x1050" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "1920x1440" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "2048x1536" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "2048x1536" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Not using default mode "2048x1536" (exceeds panel
dimensions)
[ 140.822] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[ 140.822] (II) intel(0): Printing probed modes for output LVDS
[ 140.822] (II) intel(0): Modeline "1024x600"x60.2 54.20 1024 1048 1184
1344 600 603 609 670 (40.3 kHz)
[ 140.822] (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048
600 601 604 631 +hsync +vsync (53.7 kHz)
[ 140.823] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz)
[ 140.823] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz)
[ 140.823] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 140.823] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 140.823] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832
480 481 484 509 -hsync -vsync (43.3 kHz)
[ 140.823] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz)
[ 140.823] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz)
[ 140.823] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 140.823] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936
400 401 404 446 -hsync +vsync (37.9 kHz)
[ 140.823] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832
400 401 404 445 -hsync +vsync (37.9 kHz)
[ 140.823] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832
350 382 385 445 +hsync -vsync (37.9 kHz)
[ 140.823] (II) intel(0): Output VGA disconnected
[ 140.823] (II) intel(0): Output LVDS connected
[ 140.824] (II) intel(0): Using exact sizes for initial modes
[ 140.824] (II) intel(0): Output LVDS using initial mode 1024x600
[ 140.824] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 141.598] (WW) intel(0): remove MTRR a0000 - b0000
[ 141.643] (II) intel(0): detected 1024 kB GTT.
[ 141.644] (II) intel(0): detected 8188 kB stolen memory.
[ 141.644] (==) intel(0): video overlay key set to 0x101fe
[ 141.644] (==) intel(0): DPI set to (96, 96)
[ 141.644] (II) Loading sub module "fb"
[ 141.644] (II) LoadModule: "fb"
[ 141.648] (II) Loading /usr/X11R7/lib/modules/libfb.so
[ 141.713] (II) Module fb: vendor="X.Org Foundation"
[ 141.713] compiled for 1.9.2, module version = 1.0.0
[ 141.713] ABI class: X.Org ANSI C Emulation, version 0.4
[ 141.713] (II) Loading sub module "exa"
[ 141.713] (II) LoadModule: "exa"
[ 141.717] (II) Loading /usr/X11R7/lib/modules/libexa.so
[ 141.729] (II) Module exa: vendor="X.Org Foundation"
[ 141.729] compiled for 1.9.2, module version = 2.5.0
[ 141.729] ABI class: X.Org Video Driver, version 8.0
[ 141.729] (II) intel(0): Comparing regs from server start up to After PreInit
[ 141.729] (WW) intel(0): Register 0x61200 (PP_STATUS) changed from
0xc0000008 to 0xd0000009
[ 141.729] (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
[ 141.729] (WW) intel(0): PP_STATUS after: on, ready, sequencing on
[ 141.729] (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from
0x00000120 to 0x00000020
[ 141.729] (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from
0x00000202 to 0x80000202
[ 141.729] (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS
VBLANK_INT_STATUS
[ 141.729] (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN
VSYNC_INT_STATUS VBLANK_INT_STATUS
[ 141.741] (==) Depth 24 pixmap format is 32 bpp
[ 141.741] (II) intel(0): Kernel reported 241152 total, 0 used
[ 141.742] (II) intel(0): I830CheckAvailableMemory: 964608 kB available
[ 141.742] (WW) intel(0): DRI2 requires UXA
[ 141.742] drmOpenDevice: node name is /dev/dri/card0
[ 141.742] drmOpenDevice: open result is -1, (Device not configured)
[ 141.743] drmOpenDevice: open result is -1, (Device not configured)
[ 141.743] drmOpenDevice: Open failed
[ 141.750] drmOpenDevice: node name is /dev/dri/card0
[ 141.751] drmOpenDevice: open result is -1, (Device not configured)
[ 141.751] drmOpenDevice: open result is -1, (Device not configured)
[ 141.751] drmOpenDevice: Open failed
[ 141.751] [drm] failed to load kernel module "i915"
[ 141.751] (EE) [drm] drmOpen failed.
[ 141.752] (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
[ 141.752] (**) intel(0): Framebuffer compression enabled
[ 141.752] (**) intel(0): Tiling enabled
[ 141.753] (==) intel(0): VideoRam: 262144 KB
[ 141.753] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 141.753] (II) intel(0): Tiled allocation successful.
[ 142.017] (II) intel(0): adjusting plane->pipe mappings to allow for
framebuffer compression
[ 142.017] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0,
hwp->PIOOffset is 0x0000
[ 142.017] (WW) intel(0): remove MTRR a0000 - b0000
[ 142.047] (II) EXA(0): Offscreen pixmap area of 12582912 bytes
[ 142.048] (II) EXA(0): Driver registered support for the following
operations:
[ 142.048] (II) Solid
[ 142.048] (II) Copy
[ 142.048] (II) Composite (RENDER acceleration)
[ 142.048] (==) intel(0): Backing store disabled
[ 142.048] (==) intel(0): Silken mouse enabled
[ 142.049] (II) intel(0): Initializing HW Cursor
[ 142.049] (WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
>How-To-Repeat:
On Netbook Samsung N150 configure Xorg with "Xorg -configure" and check if the
file is generated using the intel driver, move the configuration file to
/etc/X11 and run startx.
>Fix:
Use the vesa driver instead of intel.
Home |
Main Index |
Thread Index |
Old Index