port-amd64/44231: NetBSD 5.1 amd64 don't work correctly on Intel S3200SHL with ACPI

To: port-amd64-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: port-amd64/44231: NetBSD 5.1 amd64 don't work correctly on Intel S3200SHL with ACPI
From: y.schastny%gmail.com@localhost
Date: Mon, 13 Dec 2010 16:20:00 +0000 (UTC)
>Number:         44231
>Category:       port-amd64
>Synopsis:       NetBSD 5.1 amd64 don't work correctly on Intel S3200SHL with 
>ACPI
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    port-amd64-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Dec 13 16:20:00 +0000 2010
>Originator:     Z0RG
>Release:        5.1
>Organization:
None
>Environment:
NetBSD hw0 5.1 NetBSD 5.1 (GENERIC) #0: Sat Nov  6 13:19:33 UTC 2010  
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
 amd64
>Description:
Intel S3200SHL (LGA775) 
Core 2 Quad Q6600 2.4Ghz

NetBSD 5.1 RELEASE (amd64)

Hello from Russia, Moscow! Sorry for my bad English. :)

I installed system from flash card. System freezes on download tgz from HTTP or 
FTP on comp.tgz.

I installed system from CD. System freezes on installation process.

I install system without ACPI. All good.

I download sources in CVS and system freezes again! Without ACPI all good!

But I need ACPI! For remote reboot server.

I can compile my own kernel, may be it fix the problem. May be in kernel have 
are some hacks for acpi on my platform.

dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sat Nov  6 13:19:33 UTC 2010
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERIC
total memory = 4092 MB
avail memory = 3952 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 2
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xdfdfd000 (64 entries)
Intel Corporation S3210SH
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2394MHz, id 0x6fb
cpu1 at mainbus0 apid 2: Intel 686-class, 2394MHz, id 0x6fb
cpu2 at mainbus0 apid 1: Intel 686-class, 2394MHz, id 0x6fb
cpu3 at mainbus0 apid 3: Intel 686-class, 2394MHz, id 0x6fb
ioapic0 at mainbus0 apid 5: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <INTEL ,S3200SHL,00000000>, AslId <INTL,01000013>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FDC0 (PNP0700) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x29f0 (rev. 0x00)
wm0 at pci0 dev 25 function 0: 82801I (AMT) LAN Controller, rev. 2
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:15:17:27:12:81
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 18
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 17
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 17
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x102b product 0x0522 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 23
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 19
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
wm1 at pci3 dev 2 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm1: interrupting at ioapic0 pin 18
wm1: 32-bit 33MHz PCI bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:15:17:27:12:7f
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2916 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles 
it.
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2822
ahcisata0: interrupting at ioapic0 pin 21
ahcisata0: AHCI revision 1.2, 6 ports, 32 command slots, features 0xe720e0c0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394110880 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0: <ST3320620NS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd1 at atabus1 drive 0: <ST3320620NS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
ataraid0: found 1 RAID volume
ld0 at ataraid0 vendtype 5 unit 0: Intel MatrixRAID ATA RAID-1 array
ld0: 298 GB, 38913 cyl, 255 head, 63 sec, 512 bytes/sect x 625137664 sectors
opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd1 (16)
opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd1 (16)
opendisk: can't open dev wd0 (16)
opendisk: can't open dev wd1 (16)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
1. Get the Intel S3200SHL.
2. Burn amd64cd-5.1.iso on CD.
3. Try to install system over HTTP or FTP.
4. PROFIT! :)
>Fix:
Boot without ACPI. But it only temporary workaround. It need to fix.
Prev by Date: Re: bin/44220 (Huge value crashes ``date -r'')
Next by Date: PR/44229 CVS commit: src/bin/sh
Previous by Thread: PR/44230 CVS commit: src/usr.sbin/fwctl
Next by Thread: Re: port-amd64/44231: NetBSD 5.1 amd64 don't work correctly on Intel S3200SHL with ACPI
Indexes:
Home | Main Index | Thread Index | Old Index