Re: kern/43220: NETSD 5.1_RC1 doesn't boot with ACPI enabled

[Stefan Krüger <stadtkind2%gmx.de@localhost>]

The following reply was made to PR kern/43220; it has been noted by GNATS.

From: Stefan =?iso-8859-1?Q?Kr=FCger?= <stadtkind2%gmx.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: kern/43220: NETSD 5.1_RC1 doesn't boot with ACPI enabled
Date: Sun, 27 Jun 2010 11:43:28 +0200

 On Sat, 29 May 2010, David Holland wrote:
 
 > The following reply was made to PR kern/43220; it has been noted by GNATS.
 > 
 > From: David Holland <dholland-bugs%netbsd.org@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc: 
 > Subject: Re: kern/43220: NETSD 5.1_RC1 doesn't boot with ACPI enabled
 > Date: Sat, 29 May 2010 20:07:10 +0000
 > 
 >  On Wed, Apr 28, 2010 at 10:10:01PM +0000, stadtkind2%gmx.de@localhost wrote:
 >   > NetBSD 5.1_RC1 amd64 install cd hangs when booting with ACPI
 >   > enabled, here is the dmesg (I'm not getting past "ahcisata0 port 2:
 >   > device present, speed: 3.0Gb/s"):
 >   > 
 >   > http://dpaste.org/W6Bu/
 >  
 >  This has disappeared; can you mail it to gnats? (reply to this mail)
 >  
 >  Even if fiddling with the BIOS config makes things work, ideally
 >  NetBSD would work out of the box, so I'd like to leave this PR open
 >  until it's fixed properly. But, if you don't care any more, we can just
 >  close it.
 
 Hallo David,
 
 thanks for replying, I did some more tests (with 5.1_RC3) and it booted just
 fine, even when the BIOS settings mentioned above are set to AUTO...
 
 What's really keeping NetBSD from booting is the BIOS option
 
 Advanced -> CPU Configuration -> C1E Configuration
 
 (which is *not* enabled by default)
 
 seems I turned it on during some power usage tests I did back then (Linux
 works fine with it, though)
 
 but anyway, as I said, it's not on by default, so my PR can be closed
 
 Thank you again