port-amd64/43309: VX800 and CN896-VT8237S is not configured in RAID mode

To: port-amd64-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: port-amd64/43309: VX800 and CN896-VT8237S is not configured in RAID mode
From: vezhlys%gmail.com@localhost
Date: Sat, 15 May 2010 00:25:00 +0000 (UTC)
>Number:         43309
>Category:       port-amd64
>Synopsis:       VX800 and CN896-VT8237S is not configured in RAID mode
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    port-amd64-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat May 15 00:25:00 +0000 2010
>Originator:     Andrius Varanavicius
>Release:        5.1_RC1
>Organization:
>Environment:
>Description:
I have two motherboards with VIA CPUs and chipsets - Jetway JNF76-N1G-LF P 
(1GHz VIA Nano U2300, VX800) and VIA VB8001 (VIA Nano L2200 1.6GHz, 
CN896-VT8237S). If RAID mode is set in BIOS both can't detect hard drives 
during install. Hard drives are detected ok if IDE mode is set.


JNF76 dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1_RC1 (INSTALL) #0: Sat Apr 24 19:17:40 UTC 2010
        
builds%b8.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RC1/amd64/201004250032Z-obj/home/builds/ab/netbsd-5-1-RC1/src/sys/arch/amd64/compile/INSTALL
total memory = 1981 MB
avail memory = 1901 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xf0000 (32 entries)
VIA Technologies Ltd. VX800  (1.0)
mainbus0 (root)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 997MHz, id 0x6f2
cpu0: Enhanced SpeedStep (860 mV) 1500 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1500 1400 1300 1200 1100 
1000 900 800
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xfecc0000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <VX800 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
ACPI Error (dsobject-0590): Package List length larger than NumElements count 
(2), truncated
 [20080321]
ACPI Error (dsobject-0590): Package List length larger than NumElements count 
(2), truncated
 [20080321]
ACPI Error (dsobject-0590): Package List length larger than NumElements count 
(2), truncated
 [20080321]
acpi0: SCI interrupting at int 11
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
hpet0 at acpi0 (HPET, PNP0103): mem 0xfe800000-0xfe8003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
UAR3 (PNP0501) at acpi0 not configured
UAR4 (PNP0501) at acpi0 not configured
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 68.0C critical 70.0C passive 
40.0C
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0353 (rev. 0x12)
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1353 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2353 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3353 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4353 (rev. 0x00)
vendor 0x1106 product 0x5353 (interrupt system, interface 0x20) at pci0 dev 0 
function 5 not configured
pchb5 at pci0 dev 0 function 6
pchb5: vendor 0x1106 product 0x6353 (rev. 0x00)
pchb6 at pci0 dev 0 function 7
pchb6: vendor 0x1106 product 0x7353 (rev. 0x00)
vga0 at pci0 dev 1 function 0: vendor 0x1106 product 0x1122 (rev. 0x11)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb0 at pci0 dev 2 function 0: vendor 0x1106 product 0xc353 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 0: vendor 0x1106 product 0xe353 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 
0x02)
re0: interrupting at ioapic1 pin 7
re0: Ethernet address 00:30:18:a5:e7:74
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb2 at pci0 dev 3 function 1: vendor 0x1106 product 0xf353 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies unknown VIA ATA controller
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0xa0)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0xa0)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0xa0)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x90)
ehci0: interrupting at ioapic0 pin 23
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x8353 (rev. 0x00)
pchb7 at pci0 dev 17 function 7
pchb7: vendor 0x1106 product 0xa353 (rev. 0x00)
ppb3 at pci0 dev 19 function 0: vendor 0x1106 product 0xb353 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
wm0 at pci4 dev 3 function 0: Intel i82541PI 1000BASE-T Ethernet, rev. 5
wm0: interrupting at ioapic0 pin 9
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:1b:21:51:e7:24
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb4 at pci4 dev 7 function 0: vendor 0x11ab product 0x2211 (rev. 0x01)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
vendor 0x11ab product 0x6145 (SATA mass storage, interface 0x8f, revision 0xa1) 
at pci5 dev 0 function 0 not configured
azalia0 at pci0 dev 20 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x1106/0x3288 (rev. 32), HDA rev. 1.0
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x1106/0xe721 (rev. 1.0), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <4096MB, flash drive, 1.0> disk removable
sd0: 3856 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 7897088 sectors
umass1 at uhub3 port 5 configuration 1 interface 0
umass1: vendor 0x13fe Patriot Memory, rev 2.00/1.10, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <, Patriot Memory, PMAP> disk removable
sd1: 15272 MB, 30544 cyl, 32 head, 32 sec, 512 bytes/sect x 31277056 sectors
Kernelized RAIDframe activated
md0: internal 5000 KB image area
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 20 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console

VB8001 dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1_RC1 (INSTALL) #0: Sat Apr 24 19:17:40 UTC 2010
        
builds%b8.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RC1/amd64/201004250032Z-obj/home/builds/ab/netbsd-5-1-RC1/src/sys/arch/amd64/compile/INSTALL
total memory = 3006 MB
avail memory = 2895 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.3 @ 0xf0000 (30 entries)
VIA Technologies Ltd. CN896-8237S (1.0)
mainbus0 (root)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 1615MHz, id 0x6f2
cpu0: Enhanced SpeedStep (1116 mV) 1600 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1600 1500 1400 1300 1200 
1100 1000 900 800
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xfecc0000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <CN896 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0364 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xd0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1364 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2364 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3364 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4364 (rev. 0x00)
vendor 0x1106 product 0x5364 (interrupt system, interface 0x20) at pci0 dev 0 
function 5 not configured
pchb5 at pci0 dev 0 function 6
pchb5: vendor 0x1106 product 0x6364 (rev. 0x00)
pchb6 at pci0 dev 0 function 7
pchb6: vendor 0x1106 product 0x7364 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: vendor 0x1106 product 0xa364 (rev. 0x80)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x1002 product 0x9498 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
azalia0 at pci2 dev 0 function 1: Generic High Definition Audio Controller
azalia0: interrupting at ioapic1 pin 3
azalia0: host: 0x1002/0xaa38 (rev. 0), HDA rev. 1.0
ppb2 at pci0 dev 3 function 0: vendor 0x1106 product 0xc364 (rev. 0x80)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vge0 at pci3 dev 0 function 0: VIA VT612X Gigabit Ethernet (rev. 0x82)
vge0: interrupting at ioapic1 pin 7
vge0: Ethernet address: 00:40:63:fa:81:d5
ukphy0 at vge0 phy 22: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0009c3, model 0x0019, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
pci_mem_find: expected type mem, found i/o
vendor 0x1106 product 0x7372 (RAID mass storage) at pci0 dev 15 function 0 not 
configured
viaide0 at pci0 dev 15 function 1
viaide0: VIA Technologies unknown VIA ATA controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0xb0)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0xb0)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0xb0)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0xb0)
uhci3: interrupting at ioapic0 pin 23
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x90)
ehci0: interrupting at ioapic0 pin 21
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3372 (rev. 0x00)
pchb7 at pci0 dev 17 function 7
pchb7: vendor 0x1106 product 0x287e (rev. 0x00)
pchb8 at pci0 dev 19 function 0
pchb8: vendor 0x1106 product 0x337b (rev. 0x00)
ppb3 at pci0 dev 19 function 1: vendor 0x1106 product 0x337a (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pci5 at mainbus0 bus 128
pci5: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
azalia1 at pci5 dev 1 function 0: Generic High Definition Audio Controller
azalia1: interrupting at ioapic0 pin 17
azalia1: host: 0x1106/0x3288 (rev. 16), HDA rev. 1.0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: ATI R600 HDMI (rev. 1.0), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
azalia1: codec[0]: 0x1106/0x1708 (rev. 7.0), HDA rev. 1.0
audio1 at azalia1: full duplex, playback, capture, independent
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <4096MB, flash drive, 1.0> disk removable
sd0: 3856 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 7897088 sectors
ugen0 at uhub0 port 2
ugen0: vendor 0x0c45 USB camera, rev 1.10/1.01, addr 2
Kernelized RAIDframe activated
md0: internal 5000 KB image area
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
boot device: sd0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 20 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
ulpt0 at uhub2 port 1 configuration 1 interface 1
ulpt0: HP PSC 2350 series, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
umass1 at uhub2 port 1 configuration 1 interface 3
umass1: HP PSC 2350 series, rev 2.00/1.00, addr 2
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <HP, PSC 2355, 1.00> disk removable
sd1: drive offline
sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1: unable to open device, error = 19
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/27.20, addr 3, iclass 3/1
ums0 at uhidev0: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0

>How-To-Repeat:
Set RAID mode in BIOS and boot.
>Fix:
Set IDE mode in BIOS.
Follow-Ups:
- Re: port-amd64/43309: VX800 and CN896-VT8237S is not configured in RAID mode
  - From: Andrius V
Prev by Date: NetBSD Nightly Trouble Ticket Report
Next by Date: PR/43294 CVS commit: src/sys/netinet
Previous by Thread: misc/43307: security.conf(5) and xdm/xfs
Next by Thread: Re: port-amd64/43309: VX800 and CN896-VT8237S is not configured in RAID mode
Indexes:
Home | Main Index | Thread Index | Old Index