Re: port-i386/34161: current GENERIC cannot use ehci on NForce4

[Bernhard Moellemann <zza%serpens.de@localhost>]

The following reply was made to PR port-i386/34161; it has been noted by GNATS.

From: Bernhard Moellemann <zza%serpens.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: port-i386-maintainer%NetBSD.org@localhost, gnats-admin%NetBSD.org@localhost,
        netbsd-bugs%NetBSD.org@localhost
Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
Date: Mon, 26 Apr 2010 08:44:10 +0200

 On Sun, Apr 25, 2010 at 02:55:01PM +0000, Jonathan A. Kollasch wrote:
 > The following reply was made to PR port-i386/34161; it has been noted by 
 > GNATS.
 > 
 > From: "Jonathan A. Kollasch" <jakllsch%kollasch.net@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc: 
 > Subject: Re: port-i386/34161: current GENERIC cannot use ehci on NForce4
 > Date: Sun, 25 Apr 2010 14:51:38 +0000
 > 
 >  The MULTIC kernel config used for testing in this PR lacks usb* at ehci?.
 >  I'd like to see a dmesg from a sufficently-GENERIC netbsd-5 or -current.
 >  FWIW, the interrut pins do look odd compared to my nforce4 board.
 
 Unfortunately I no longer own this hardware 8-(
 
 The most recent dmesg I can offer is this from a 4.99.50, but of cource your
 recent changes are not in:
 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.50 (GENERIC) #4: Tue Jan 29 13:55:30 CET 2008
        root@arcanic:/mnt/top/src/src/obj/sys/arch/i386/compile/GENERIC
 total memory = 1023 MB
 avail memory = 991 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 FUJITSU SIEMENS A8NE-FM (1.XX   )
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: (boot processor)
 cpu0: AMD Athlon 64 X2 (686-class), 2010.42 MHz, id 0x20fb1
 cpu0: features f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
 cpu0: features f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
 cpu0: features2 1<SSE3>
 cpu0: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 512 KB 64B/line 16-way
 cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: Initial APIC ID 0
 cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
 cpu0: calibrating local timer
 cpu0: apic clock running at 201 MHz
 cpu0: 8 page colors
 cpu1 at mainbus0 apid 1: (application processor)
 cpu1: AMD Athlon 64 X2 (686-class), 2010.40 MHz, id 0x20fb1
 cpu1: features f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu1: features f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
 cpu1: features f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
 cpu1: features2 1<SSE3>
 cpu1: "AMD Athlon(tm) 64 X2 Dual Core Processor 3800+"
 cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu1: L2 cache 512 KB 64B/line 16-way
 cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu1: Initial APIC ID 1
 cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20070320
 acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi_pci_link: WARNING: powerhook_establish is deprecated
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
 MBIO (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
 LNK1 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LNK3 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LUBA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LMAC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LACI (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LSMB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LUB2 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LSID (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 LFID (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APC1 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APC3 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APCF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APCH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APCJ (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APCS (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APCL (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APSI (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 APSJ (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
 SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
 PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
 DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): AT Timer
 attimer1: io 0x40-0x43 irq 0
 RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
 pcppi1 at acpi0 (SPKR, PNP0800)
 pcppi1: io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 npx1 at acpi0 (COPR, PNP0C04)
 npx1: io 0xf0-0xff irq 13
 npx1: reported by CPUID; using exception 16
 UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
 LPT1 (PNP0400) [Standard LPT printer port] at acpi0 not configured
 pckbc1 at acpi0 (PS2M, PNP0F13): aux port
 pckbc1: irq 12
 pckbc2 at acpi0 (PS2K, PNP0303): kbd port
 pckbc2: io 0x60,0x64 irq 1
 EXPL (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
 MEM (PNP0C01) [System Board] at acpi0 not configured
 FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
 acpitz0 at acpi0 (THRM): active cooling level 0: 73.0C critical 75.0C passive 
40.0C
 apm0 at acpi0: Power Management spec V1.2
 pcppi1: attached to attimer1
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci0 
dev 0 function 0 not configured
 pcib0 at pci0 dev 1 function 0
 pcib0: NVIDIA nForce4 PCI-ISA bridge (rev. 0xa3)
 nfsmbc0 at pci0 dev 1 function 1: NVIDIA nForce4 SMBus (rev. 0xa2)
 nfsmb0 at nfsmbc0 SMBus 1
 iic0 at nfsmb0: I2C bus
 nfsmb1 at nfsmbc0 SMBus 2
 iic1 at nfsmb1: I2C bus
 ohci0 at pci0 dev 2 function 0: NVIDIA nForce4 USB Host Controller (rev. 0xa2)
 APCF: Picked IRQ 20 with weight 0
 ohci0: interrupting at ioapic0 pin 20 (irq 5)
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 8 ports with 8 removable, self powered
 ehci0 at pci0 dev 2 function 1: NVIDIA nForce4 USB2 Host Controller (rev. 0xa3)
 APCL: Picked IRQ 21 with weight 0
 ehci0: interrupting at ioapic0 pin 21 (irq 3)
 ehci0: EHCI version 1.0
 ehci0: companion controller, 4 ports each: ohci0
 usb1 at ehci0: USB revision 2.0
 uhub1 at usb1
 uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 8 ports with 8 removable, self powered
 auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
 APCJ: Picked IRQ 22 with weight 0
 auich0: interrupting at ioapic0 pin 22 (irq 11)
 auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
 auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
 viaide0 at pci0 dev 6 function 0
 viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to compatibility mode
 viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus0 at viaide0 channel 0
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus1 at viaide0 channel 1
 viaide1 at pci0 dev 7 function 0
 viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
 viaide1: bus-master DMA support present
 viaide1: primary channel wired to native-PCI mode
 APSI: Picked IRQ 23 with weight 0
 viaide1: using ioapic0 pin 23 (irq 11) for native-PCI interrupt
 atabus2 at viaide1 channel 0
 viaide1: secondary channel wired to native-PCI mode
 atabus3 at viaide1 channel 1
 viaide2 at pci0 dev 8 function 0
 viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
 viaide2: bus-master DMA support present
 viaide2: primary channel wired to native-PCI mode
 APSJ: Picked IRQ 20 with weight 1
 viaide2: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
 atabus4 at viaide2 channel 0
 viaide2: secondary channel wired to native-PCI mode
 atabus5 at viaide2 channel 1
 ppb0 at pci0 dev 9 function 0: NVIDIA nForce4 PCI Host Bridge (rev. 0xa2)
 pci1 at ppb0 bus 5
 pci1: i/o space, memory space enabled
 bktr0 at pci1 dev 3 function 0
 APC1: Picked IRQ 16 with weight 0
 bktr0: interrupting at ioapic0 pin 16 (irq 3)
 bktr0: Hauppauge Model 37284 B421
 bktr0: Detected a MSP3410D-B4 at 0x80
 bktr0: Detected a DPL3418A-A2 at 0x84
 bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, 
dpl3518a dolby, remote control.
 radio0 at bktr0
 Brooktree Bt878 Video Capture (Audio Section) (miscellaneous multimedia, 
revision 0x11) at pci1 dev 3 function 1 not configured
 nfe0 at pci0 dev 10 function 0: NVIDIA nForce4 Ethernet (rev. 0xa3)
 APCH: Picked IRQ 21 with weight 1
 nfe0: interrupting at ioapic0 pin 21 (irq 10)
 nfe0: Ethernet address 00:13:d4:7b:50:44
 rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1
 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 ppb1 at pci0 dev 11 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
 pci2 at ppb1 bus 4
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 12 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb3 at pci0 dev 13 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
 pci4 at ppb3 bus 2
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb4 at pci0 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
 pci5 at ppb4 bus 1
 pci5: i/o space, memory space enabled, rd/line, wr/inv ok
 vga1 at pci5 dev 0 function 0: NVIDIA product 0x0141 (rev. 0xa2)
 vga1: WARNING: ignoring 64-bit BAR @ 0x14
 vga1: WARNING: ignoring 64-bit BAR @ 0x1c
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 direct rendering for vga1 unsupported
 pchb0 at pci0 dev 24 function 0
 pchb0: Advanced Micro Devices K8 AMD64 HyperTransport configuration (rev. 0x00)
 pchb1 at pci0 dev 24 function 1
 pchb1: Advanced Micro Devices K8 AMD64 Address Map configuration (rev. 0x00)
 pchb2 at pci0 dev 24 function 2
 pchb2: Advanced Micro Devices K8 AMD64 DRAM configuration (rev. 0x00)
 pchb3 at pci0 dev 24 function 3
 pchb3: Advanced Micro Devices K8 AMD64 Miscellaneous configuration (rev. 0x00)
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 isapnp0: no ISA Plug 'n Play devices found
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 audio0 at auich0: full duplex, independent
 Kernelized RAIDframe activated
 Too many symbols for tree, skipping 1663 symbols
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-H42L, K266CEL1642, SL00> cdrom 
removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
 cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
 viaide1 port 0: device present, speed: 1.5Gb/s
 viaide1 port 1: device present, speed: 1.5Gb/s
 viaide2 port 0: device present, speed: 1.5Gb/s
 wd0 at atabus2 drive 0: <SAMSUNG HD401LJ>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
 wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd1 at atabus3 drive 0: <ST3400620AS>
 wd1: quirks 2<FORCE_LBA48>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd2 at atabus4 drive 0: <ST3250823AS>
 wd2: quirks 2<FORCE_LBA48>
 wd2: drive supports 16-sector PIO transfers, LBA48 addressing
 wd2: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
 wd2: 32-bit data port
 wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd2(viaide2:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 uhub1: port 7, set config at addr 2 failed
 uhub1: device problem, disabling port 7
 raid0: RAID Level 1
 raid0: Components: /dev/wd0a /dev/wd1a
 raid0: Total Sectors: 230693248 (112643 MB)
 boot device: raid0
 root on raid0a dumps on raid0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 /dev/wd1e: file system not clean (fs_clean=0); please fsck(8)
 /dev/wd1e: lost blocks 0 files 0
 acpi0: entering state 3
 Devices without power management support: pcppi1 nfsmbc0 nfsmb0 nfsmb1 bktr0 
radio0 lpt0 raid0
 acpi0: aborting suspend
 acpi0: entering state 1
 acpi0: cannot enter the sleep state (1)
 
   sorry,
     Bernhard  //
             \X/
 >