PR/42422 CVS commit: [netbsd-5] src/sys/dev

[Stephen Borrill <sborrill%netbsd.org@localhost>]

The following reply was made to PR kern/42422; it has been noted by GNATS.

From: Stephen Borrill <sborrill%netbsd.org@localhost>
To: gnats-bugs%gnats.NetBSD.org@localhost
Cc: 
Subject: PR/42422 CVS commit: [netbsd-5] src/sys/dev
Date: Wed, 27 Jan 2010 23:34:56 +0000

 Module Name:   src
 Committed By:  sborrill
 Date:          Wed Jan 27 23:34:52 UTC 2010
 
 Modified Files:
        src/sys/dev/mii [netbsd-5]: igphyreg.h
        src/sys/dev/pci [netbsd-5]: if_wm.c if_wmreg.h if_wmvar.h pcidevs
            pcidevs.h pcidevs_data.h
 Added Files:
        src/sys/dev/mii [netbsd-5]: inbmphyreg.h
 
 Log Message:
 Pull up the following revisions(s) (requested by msaitoh in ticket #1277):
 sys/dev/pci/if_wm.c            1.184-1.194
 sys/dev/pci/if_wmreg.h         1.29-1.35
 sys/dev/pci/if_wmvar.h         1.5-1.8
 sys/dev/pci/pcidevs            1.1006,1.1009-1.1010, 1.1012-1.1013 via patch
 sys/dev/pci/pcidevs.h          regen
 sys/dev/pci/pcidevs_data.h     regen
 sys/dev/mii/igphyreg.h         1.5
 sys/dev/mii/inbmphyreg.h       1.1
 
 - Add support for i82583V.
 - Add some ICH9 and ICH10 devices.
 - Add support for PCH.
 - Fix the bug that ICH9 can't found a PHY. Fixes PR#42237
 - Fix an incorrect test for WM_F_EEPROM_INVALID since rev. 1.183. Some old
   chips don't set EECD_EE_PRES.
 - Fix a bug that both WM_F_EEPROM_SPI and WM_F_EEPROM_FLASH are set.
 - Add a missing decrement for a timeout reported by Wolfgang Stukenbrock
   in PR#42422.
 - PBA setting for i82574 is not 12K but 20K.
 - Enable checking the management mode on 82574.
 - Fix the length of the delay() in wm_gmii_reset(). It fixed the problem that
   sometimes the driver misunderstood PHYs in mii_attach(). It was reported
   by MATSUI Yoshihiro. We observed it on ICH9.
 - Fix the checking of jumbo frame function
 - Remove the extra macro definition for the offset 0x1a in EEPROM.
 - Add missing break in wm_reset()...
 - Fix the offset of WMREG_PBS...
 - Make wm_reset() and wm_gmii_reset() close to e1000 driver.
   At least, this change make wm_attach() stable on ICH9.
 - Reset GMII interface after wm_reset() in wm_init().
 - Rework for assigning mii_{read,write}reg(). Use PCI product ID to identify
   the PHY.
 - Add code about LPLU(Low Power Link Up) function. It seems that we have to
   do the same work for ICH9.
 - Fixes the rx stall problem on 82578 by MANY workaround code. We need more
   work for 82577.
 
 
 To generate a diff of this commit:
 cvs rdiff -u -r1.4 -r1.4.86.1 src/sys/dev/mii/igphyreg.h
 cvs rdiff -u -r0 -r1.1.2.2 src/sys/dev/mii/inbmphyreg.h
 cvs rdiff -u -r1.162.4.11 -r1.162.4.12 src/sys/dev/pci/if_wm.c
 cvs rdiff -u -r1.24.20.3 -r1.24.20.4 src/sys/dev/pci/if_wmreg.h
 cvs rdiff -u -r1.2.46.1 -r1.2.46.2 src/sys/dev/pci/if_wmvar.h
 cvs rdiff -u -r1.962.4.9 -r1.962.4.10 src/sys/dev/pci/pcidevs \
     src/sys/dev/pci/pcidevs_data.h
 cvs rdiff -u -r1.963.4.9 -r1.963.4.10 src/sys/dev/pci/pcidevs.h
 
 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.