Re: kern/42667: rum(4) is not detected on HP Pavilion Slimline s5210uk Desktop PC

[Alexander Nasonov <alnsn%yandex.ru@localhost>]

David Holland wrote:
>  Can you easily try 5.0_STABLE (that is, what will be 5.1 "soon")?
>  There have been at least some possible fixes for this type of problem
>  and those patches probably aren't in 5.0.1.
>  
>  The chance of it working isn't that high though, USB still being an
>  ongoing problem :(

It was easier to try 5.99.24 checked out earlier today. It still doesn't
detect the  card.
Alex


# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.24 (INSTALL) #0: Tue Jan 26 23:59:02 GMT 2010
        
root%obed.my.domain@localhost:/home/alnsn/src/netbsd-current/src/sys/arch/amd64/compile/obj/INSTALL
total memory = 4095 MB
avail memory = 3951 MB
timecounter: Timecounters tick every 10.000 msec
userconf: configure system autoconfiguration:
uc> disabler ^H ^H^H ^H nfe
[279] nfe* disabled
uc> enable rum
[382] rum* already enabled
uc> quii^H ^Ht
Continuing...
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP-Pavilion VG249AA-ABU s5210uk ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2612MHz, id 0x100f52
cpu1 at mainbus0 apid 1: AMD 686-class, 2612MHz, id 0x100f52
cpu2 at mainbus0 apid 2: AMD 686-class, 2612MHz, id 0x100f52
cpu3 at mainbus0 apid 3: AMD 686-class, 2612MHz, id 0x100f52
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <HPQOEM,SLIC-CPC,20090818>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
hpet0 at acpi0 (HPET, PNP0103-0): mem 0xfeff0000-0xfeff0fff
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x03ea (RAM memory, revision 0xa1) at pci0 dev 0 function 
0 not configured
pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x03e0 (rev. 0xa2)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x03eb (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
vendor 0x10de product 0x03f5 (RAM memory, revision 0xa2) at pci0 dev 1 function 
2 not configured
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x03f1 (rev. 0xa3)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x03f2 (rev. 0xa3)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ppb0 at pci0 dev 4 function 0: vendor 0x10de product 0x03f3 (rev. 0xa1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
hdaudio0 at pci0 dev 5 function 0: HD Audio Controller
LAZA: Picked IRQ 22 with weight 0
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0 vendor 0x10EC product 0x0662 nid 0x01 (firmware 
configuration)
hdafg0: DAC0:02, Analog Speaker: Jack (Green, 14)
hdafg0: DAC0:02, Analog HP Out: Jack (Green, 1B)
hdafg0: ADC1:08, Analog Mic In: Jack (Pink, 18)
hdafg0: ADC1:08, Analog Line In: Jack (Blue, 1A)
hdafg0: 2ch/2ch 44100Hz-96000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
vendor 0x10de product 0x03ef (miscellaneous bridge, revision 0xa2) at pci0 dev 
7 function 0 not configured
viaide0 at pci0 dev 8 function 0: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
LSA0: Picked IRQ 23 with weight 0
viaide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 8 function 1: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSA1: Picked IRQ 20 with weight 1
viaide1: using ioapic0 pin 20 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
ppb1 at pci0 dev 9 function 0: vendor 0x10de product 0x03e8 (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x1002 product 0x954f (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio1 at pci2 dev 0 function 1: HD Audio Controller
LNEA: Picked IRQ 16 with weight 0
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1 vendor 0x1002 product 0xAA01 nid 0x01 (firmware 
configuration)
hdafg1: DAC0:02, Digital Digital Other Out: Jack (Unknown, 03)
hdafg1: 2ch/0ch 32000Hz-48000Hz 16/16
audio1 at hdafg1: half duplex, playback
ppb2 at pci0 dev 11 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 12 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3: AMD CPU Temperature Sensors (Family10h / 
Family11h)
pchb3 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2612002140 Hz quality 3000
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
viaide0 port 0: device present, speed: 3.0Gb/s
viaide0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD6400AAKS-65A7B2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <hp      DVD-RAM GH40L, B9ICBP4305474, RB0A> cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: HP HP Wireless Keyboard Kit, rev 2.00/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0
ugen0 at uhub1 port 5
ugen0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 4 configuration 1 interface 1
uhidev1: HP HP Wireless Keyboard Kit, rev 2.00/0.02, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=2, output=0, feature=0
uhid3 at uhidev1 reportid 5: input=0, output=0, feature=7
uhid4 at uhidev1 reportid 6: input=0, output=0, feature=7
uhid5 at uhidev1 reportid 7: input=0, output=0, feature=7
uhid6 at uhidev1 reportid 8: input=2, output=0, feature=0
umass0 at uhub1 port 10 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
Kernelized RAIDframe activated
md0: internal 5000 KB image area
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console
umodem0 at uhub0 port 8 configuration 1 interface 1
umodem0: Nokia Nokia 6500c, rev 2.00/6.61, addr 3, iclass 2/2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
ucom0: detached
umodem0: detached
umodem0: at uhub0 port 8 (addr 3) disconnected
umass1 at uhub0 port 8 configuration 1 interface 0
umass1: Nokia Nokia 6500c, rev 2.00/6.61, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd0 at scsibus1 target 0 lun 0: <Nokia, Nokia 6500c, 0000> disk removable
sd0: fabricating a geometry
sd0: 960 MB, 960 cyl, 64 head, 32 sec, 512 bytes/sect x 1966081 sectors
sd0: fabricating a geometry
sd0: detached
scsibus1: detached
umass1: detached
umass1: at uhub0 port 8 (addr 3) disconnected
ugen1 at uhub0 port 8
ugen1: Nokia Nokia 6500c, rev 2.00/6.61, addr 3
ugen1: detached
ugen1: at uhub0 port 8 (addr 3) disconnected
ugen1 at uhub0 port 8
ugen1: Nokia Nokia 6500c, rev 2.00/6.61, addr 3
ugen1: detached
ugen1: at uhub0 port 8 (addr 3) disconnected
umodem0 at uhub0 port 8 configuration 1 interface 1
umodem0: Nokia Nokia 6500c, rev 2.00/6.61, addr 3, iclass 2/2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
ucom0: detached
umodem0: detached
umodem0: at uhub0 port 8 (addr 3) disconnected
umodem0 at uhub0 port 8 configuration 1 interface 1
umodem0: Nokia Nokia 6500c, rev 2.00/6.61, addr 3, iclass 2/2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
ucom0: detached
umodem0: detached
umodem0: at uhub0 port 8 (addr 3) disconnected
umass1 at uhub0 port 8 configuration 1 interface 0
umass1: Nokia Nokia 6500c, rev 2.00/6.61, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd0 at scsibus1 target 0 lun 0: <Nokia, Nokia 6500c, 0000> disk removable
sd0: fabricating a geometry
sd0: 960 MB, 960 cyl, 64 head, 32 sec, 512 bytes/sect x 1966081 sectors
sd0: fabricating a geometry