kern/42667: rum(4) is not detected on HP Pavilion Slimline s5210uk Desktop PC

[alnsn%yandex.ru@localhost]

>Number:         42667
>Category:       kern
>Synopsis:       rum(4) is not detected on HP Pavilion Slimline s5210uk Desktop 
>PC
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Jan 23 12:25:00 +0000 2010
>Originator:     Alexander Nasonov
>Release:        NetBSD 5.0.1 amd64
>Organization:
>Environment:
uname is not available on install CD - see dmesg below
>Description:
Wireless network card is not detected by NetBSD 5.0.1 and -current. OpenBSD 
detects it fine (OpenBSD dmesg is at the bottom of the report). 

(I disabled nfe(4) ethernet card because it's broken too but I don't care, I 
knew that NVIDIA should be avoided but it sneaks to all desktops in one form or 
another.)

I set severity to serious because networking is not possible on the PC.

# ifconfig -a
lo0: flags=8048<LOOPBACK,RUNNING,MULTICAST> mtu 33648

# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.1 (INSTALL) #0: Thu Jul 30 00:37:49 UTC 2009
        
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/amd64/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/amd64/compile/INSTALL
total memory = 4095 MB
avail memory = 3951 MB
timecounter: Timecounters tick every 10.000 msec
userconf: configure system autoconfiguration:
uc> enable rum
[366] rum* already enabled
uc> disable nfe
[266] nfe* disabled
uc> quit
Continuing...
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xfcef0 (21 entries)
HP-Pavilion VG249AA-ABU s5210uk ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2612MHz, id 0x100f52
cpu1 at mainbus0 apid 1: AMD 686-class, 2612MHz, id 0x100f52
cpu2 at mainbus0 apid 2: AMD 686-class, 2612MHz, id 0x100f52
cpu3 at mainbus0 apid 3: AMD 686-class, 2612MHz, id 0x100f52
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HPQOEM,SLIC-CPC,20090818>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfeff0000-0xfeff0fff
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x03ea (RAM memory, revision 0xa1) at pci0 dev 0 function 
0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x03e0 (rev. 0xa2)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x03eb (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
vendor 0x10de product 0x03f5 (RAM memory, revision 0xa2) at pci0 dev 1 function 
2 not configured
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x03f1 (rev. 0xa3)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x03f2 (rev. 0xa3)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ppb0 at pci0 dev 4 function 0: vendor 0x10de product 0x03f3 (rev. 0xa1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
azalia0 at pci0 dev 5 function 0: Generic High Definition Audio Controller
LAZA: Picked IRQ 22 with weight 0
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x10de/0x03f0 (rev. 162), HDA rev. 1.0
vendor 0x10de product 0x03ef (miscellaneous bridge, revision 0xa2) at pci0 dev 
7 function 0 not configured
viaide0 at pci0 dev 8 function 0
viaide0: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
LSA0: Picked IRQ 23 with weight 0
viaide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 8 function 1
viaide1: NVIDIA MCP61 Serial ATA Controller (rev. 0xa2)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSA1: Picked IRQ 20 with weight 1
viaide1: using ioapic0 pin 20 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
ppb1 at pci0 dev 9 function 0: vendor 0x10de product 0x03e8 (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x1002 product 0x954f (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
azalia1 at pci2 dev 0 function 1: Generic High Definition Audio Controller
LNEA: Picked IRQ 16 with weight 0
azalia1: interrupting at ioapic0 pin 16
azalia1: host: 0x1002/0xaa38 (rev. 0), HDA rev. 1.0
ppb2 at pci0 dev 11 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 12 function 0: vendor 0x10de product 0x03e9 (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb3 at pci0 dev 24 function 4
pchb3: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2612053860 Hz quality 3000
azalia0: codec[0]: Realtek ALC662-GR (rev. 1.1), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
azalia1: codec[0]: ATI R600 HDMI (rev. 1.0), HDA rev. 1.0
audio1 at azalia1: full duplex, independent
uhub0 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
viaide0 port 1: device present, speed: 1.5Gb/s
viaide0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0: <WDC WD6400AAKS-65A7B2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <hp      DVD-RAM GH40L, B9ICBP4305474, RB0A> cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev0 at uhub1 port 4 configuration 1 interface 0
uhidev0: HP HP Wireless Keyboard Kit, rev 2.00/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0
ugen0 at uhub0 port 5
ugen0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 4 configuration 1 interface 1
uhidev1: HP HP Wireless Keyboard Kit, rev 2.00/0.02, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=2, output=0, feature=0
uhid3 at uhidev1 reportid 5: input=0, output=0, feature=7
uhid4 at uhidev1 reportid 6: input=0, output=0, feature=7
uhid5 at uhidev1 reportid 7: input=0, output=0, feature=7
uhid6 at uhidev1 reportid 8: input=2, output=0, feature=0
umass0 at uhub0 port 7 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.19, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, USB SD Reader, 1.00> disk removable
sd0: fabricating a geometry
sd0: 1938 MB, 1938 cyl, 64 head, 32 sec, 512 bytes/sect x 3970048 sectors
sd0: fabricating a geometry
sd1 at scsibus0 target 0 lun 1: <Generic, USB CF Reader, 1.01> disk removable
sd1: drive offline
sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <Generic, USB SM Reader, 1.02> disk removable
sd2: drive offline
sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <Generic, USB MS Reader, 1.03> disk removable
sd3: drive offline
sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd3: unable to open device, error = 19
umass1 at uhub0 port 10 configuration 1 interface 0
umass1: Generic Mass Storage Device, rev 2.00/1.00, addr 4
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
umass1: BBB reset failed, TIMEOUT
umass1: BBB bulk-in clear stall failed, IOERROR
umass1: BBB bulk-out clear stall failed, IOERROR
Kernelized RAIDframe activated
md0: internal 5000 KB image area
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex
sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
    SENSE KEY:  Not Ready
 COMMAND INFO:  11162945 (0xaa5541)
     ASC/ASCQ:  Medium Not Present
     FRU CODE:  0x1

boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 177 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console



OpenBSD 4.6:
# dmesg
OpenBSD 4.6 (GENERIC.MP) #81: Thu Jul  9 21:26:19 MDT 2009
    
deraadt%amd64.openbsd.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3756720128 (3582MB)
avail mem = 3633721344 (3465MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xfcef0 (21 entries)
bios0: vendor American Megatrends Inc. version "5.06" date 08/18/2009
bios0: HP-Pavilion VG249AA-ABU s5210uk
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SLIC SSDT
acpi0: wakeup devices NSMB(S4) P0P1(S4) HDAC(S4) BR10(S4) BR11(S4) BR12(S4) 
NMAC(S5) USB0(S3) USB2(S3) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II X4 620 Processor, 2612.31 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II X4 620 Processor, 2611.89 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Athlon(tm) II X4 620 Processor, 2611.89 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Athlon(tm) II X4 620 Processor, 2611.89 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 
16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 25000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (BR10)
acpiprt3 at acpi0: bus 3 (BR11)
acpiprt4 at acpi0: bus 4 (BR12)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
pci0 at mainbus0 bus 0
"NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
iic1 at nviic0
"NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa3: apic 4 int 14 (irq 
14), version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa3: apic 4 int 7 (irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1
pci1 at ppb0 bus 1
azalia0 at pci0 dev 5 function 0 "NVIDIA MCP61 HD Audio" rev 0xa2: apic 4 int 
10 (irq 10)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
"NVIDIA MCP61 LAN" rev 0xa2 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 8 function 0 "NVIDIA MCP61 SATA" rev 0xa2: DMA
pciide0: using apic 4 int 5 (irq 5) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD6400AAKS-65A7B2>
wd0: 16-sector PIO, LBA48, 610480MB, 1250263728 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <hp, DVD-RAM GH40L, RB0A> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 8 function 1 "NVIDIA MCP61 SATA" rev 0xa2: DMA
pciide1: using apic 4 int 5 (irq 5) for native-PCI interrupt
ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 vendor "ATI", unknown product 0x954f rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia1 at pci2 dev 0 function 1 "ATI Radeon HD 4000 HD Audio" rev 0x00: apic 4 
int 14 (irq 14)
azalia1: codecs: ATI/0xaa01
audio1 at azalia1
ppb2 at pci0 dev 11 function 0 "NVIDIA MCP61 PCIE" rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 12 function 0 "NVIDIA MCP61 PCIE" rev 0xa2
pci4 at ppb3 bus 4
pchb0 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb3 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
rum0 at uhub0 port 5 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:22:5f:eb:9e:4d
umass0 at uhub0 port 7 configuration 1 interface 0 "Generic Mass Storage 
Device" rev 2.00/1.19 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct 
removable
sd0: 1938MB, 512 bytes/sec, 3970048 sec total
sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct 
removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct 
removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct 
removable
sd3: drive offline
umass1 at uhub0 port 10 configuration 1 interface 0 "Generic Mass Storage 
Device" rev 2.00/1.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd4 at scsibus2 targ 1 lun 0: <Multi, Flash Reader, 1.00> SCSI0 0/direct 
removable
sd4: drive offline
uhidev0 at uhub1 port 4 configuration 1 interface 0 "HP HP Wireless Keyboard 
Kit" rev 2.00/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 4 configuration 1 interface 1 "HP HP Wireless Keyboard 
Kit" rev 2.00/0.02 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=2, output=0, feature=0
uhid3 at uhidev1 reportid 5: input=0, output=0, feature=7
uhid4 at uhidev1 reportid 6: input=0, output=0, feature=7
uhid5 at uhidev1 reportid 7: input=0, output=0, feature=7
uhid6 at uhidev1 reportid 8: input=2, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
sd3 detached
sd2 detached
sd1 detached
sd0 detached
scsibus1 detached
umass0 detached
>How-To-Repeat:

>Fix: