Re: kern/36883 (azalia device doesn't sense plugging of the headphones.)

[Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>]

Hi

With the new hdaudio, the internal speaker don't work (no sound),
but I can use headphones without use of mixerctl.

I attach dmesg with HDAUDIO_DEBUG and HDAUDIO_AFG_DEBUG options, and output of 
'mixerctl -av'.
I have no /etc/mixerctl.conf now.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.16 (BRIGHTGIRL2) #4: Fri Sep 11 23:56:48 JST 2009
        
root%hydrogen.elements.tetera.org@localhost:/usr/obj/sys/arch/i386/compile/BRIGHTGIRL2
total memory = 1013 MB
avail memory = 985 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
FUJITSU FMVLP70WN ( )
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 1197MHz, id 0x6ec
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x27a0 (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i945GM
i915drm0: AGP at 0xe0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 
2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at irq 11
hdaudio0: High Definition Audio version 1.0
hdaudio0: OSS 4 ISS 4 BSS 0 SDO 0 64-bit
hdaudio0: using 1024 byte CORB (cap 4)
hdaudio0: using 2048 byte RIRB (cap 4)
hdaudio0: Codec00: 8384:7616 HDA 1.0 rev 2 stepping 1
hdafg0 at hdaudio0 vendor 0x8384 product 0x7616 nid 0x01 (firmware 
configuration)
hdafg0: parsing widgets
hdafg0: afg start 02 end 25 nwidgets 35
hdafg0: powering up widgets
hdafg0: afg widgets 0xcb867000-0xcb869530
hdafg0: parsing controls
hdafg0: disabling non-audio devices
hdafg0: disabling useless devices
hdafg0: parsing associations
hdafg0:   count present associations
hdafg0:   maxassocs 3
hdafg0:   allocating memory
hdafg0:   scan associations, skipping as=0
hdafg0:   all done
hdafg0: building tree
hdafg0: disabling unassociated pins
hdafg0: disabling unselected pins
hdafg0: disabling useless devices
hdafg0: disabling cross-associated pins
hdafg0: disabling useless devices
hdafg0: assigning mixer names to sound sources
hdafg0: assigning mixers to device tree
hdafg0: preparing pin controls
hdafg0: commiting settings
hdafg0: setup jack sensing
hdafg0: building mixer controls
hdafg0: ADC0:07, Analog Mic In: Fixed Function (Unknown, 13)
hdafg0: ADC1:08, Analog Mic In: Jack (Black, 0C)
hdafg0: DAC2:02, Analog HP Out: Jack (Black, 0A)
hdafg0: configuring encodings
hdafg0: 2ch/2ch 44100Hz-192000Hz 16/16 20/32 24/32
hdafg0: reserving streams
hdafg0: connecting streams
hdafg0: attaching audio device
audio0 at hdafg0: full duplex, independent
hdaudio0: Codec01: 11C1:1040 HDA 1.0 rev 2 stepping 0
hdvsmfg at hdaudio0 vendor 0x11C1 product 0x1040 nid 0x01 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci1 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC Ultra rev. A1 (0x2): irq 11
msk0 at mskc0 port A: Ethernet address 00:17:42:3d:72:02
ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
pci2 at ppb1 bus 5
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4222 (rev. 0x02)
wpi0: interrupting at irq 11
wpi0: JPN, address 00:1b:77:0c:6f:4a
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at irq 11
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at irq 11
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci3 at ppb2 bus 8
pci3: i/o space, memory space enabled
cbb0 at pci3 dev 3 function 0: vendor 0x1180 product 0x0476 (rev. 0x8d)
sdhc0 at pci3 dev 3 function 1: vendor 0x1180 product 0x0822 (rev. 0x13)
sdhc0: interrupting at irq 11
sdmmc0 at sdhc0
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 9
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) 
(rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at irq 11
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x220-0x227 irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1197078390 Hz quality 3000
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0 at uhub2 port 1
ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2
wd0 at atabus0 drive 0: <TOSHIBA MK6006GAH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ubt0 at uhub2 port 2
ubt0: vendor 0x0c24 product 0x000f, rev 2.00/19.15, addr 3
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
i915drm0: interrupting at irq 11

outputs.master=254,254 volume delta=2
inputs.dac=254,254 volume delta=2
inputs.beep=255,255 volume delta=64
inputs.reclvl=0,0 volume delta=51
record.monitor=0,0 volume delta=256
outputs.dacsel=DAC02  { DAC02 }
record.source=ADC00,ADC01  { ADC00 ADC01 }