kern/41599: inserting a CD causes the system to wedge

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: kern/41599: inserting a CD causes the system to wedge
From: Taylor R Campbell <campbell%mumble.net@localhost>
Date: Mon, 15 Jun 2009 20:55:00 +0000 (UTC)
>Number:         41599
>Category:       kern
>Synopsis:       inserting a CD causes the system to wedge
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Jun 15 20:55:00 +0000 2009
>Originator:     Taylor R Campbell <campbell%mumble.net@localhost>
>Release:        NetBSD 5.0_STABLE
>Organization:
>Environment:
System: NetBSD joule.t.continuation.org 5.0_STABLE NetBSD 5.0_STABLE (RIAGATE) 
#0: Sun Jun 14 17:49:06 EDT 2009 
riastradh%Oberon.local@localhost:/Users/riastradh/os/netbsd/5/obj/sys/arch/i386/compile/RIAGATE
 i386
Architecture: i386
Machine: i386
>Description:

        When I insert a CD into the CD-ROM drive, the system wedges,
        and the kernel reports approximately the following messages
        (from memory, because I don't want to test this a fourth time
        (this machine is my home router) and because it didn't get
        written to any file):

                wdc_atapi_intr: bad data phase DATAOUT
                piixide0: reset failed
                piixide0: unbusy timed out
                piixide0: reset failed
                piixide0: unbusy timed out
                piixide0: reset failed
                piixide0: unbusy timed out
                ...

        This is on a freshly installed 5.0_STABLE system from sources
        updated 2009-06-14.  The CD I tried to insert is the ISO image
        I built from those sources, from which I upgraded this former
        4.0.1 system to 5.0_STABLE.

        Kernel configuration:

include "arch/i386/conf/GENERIC"

# [TRC 20090614: This system should be reasonably secure.  No X11.]
no options      INSECURE

# [TRC 20090614: We are a gateway.]
options         GATEWAY         # packet forwarding

# [TRC 20090614: Enable pf(4).]
pseudo-device   pf                      # PF packet filter
pseudo-device   pflog                   # PF log if

# [TRC 20090614: These may be useful some day, but not now.]
#pseudo-device  carp                    # Common Address Redundancy Protocol
#options        BRIDGE_IPF              # bridge uses IP/IPv6 pfil hooks too

# [TRC 20090614: Enable ALTQ.]
options         ALTQ            # Manipulate network interfaces' output queues
options         ALTQ_BLUE       # Stochastic Fair Blue
options         ALTQ_CBQ        # Class-Based Queueing
options         ALTQ_CDNR       # Diffserv Traffic Conditioner
options         ALTQ_FIFOQ      # First-In First-Out Queue
options         ALTQ_FLOWVALVE  # RED/flow-valve (red-penalty-box)
options         ALTQ_HFSC       # Hierarchical Fair Service Curve
options         ALTQ_LOCALQ     # Local queueing discipline
options         ALTQ_PRIQ       # Priority Queueing
options         ALTQ_RED        # Random Early Detection
options         ALTQ_RIO        # RED with IN/OUT
options         ALTQ_WFQ        # Weighted Fair Queueing

        dmesg(8) output:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (RIAGATE) #0: Sun Jun 14 17:49:06 EDT 2009
        
riastradh%Oberon.local@localhost:/Users/riastradh/os/netbsd/5/obj/sys/arch/i386/compile/RIAGATE
total memory = 254 MB
avail memory = 238 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation OptiPlex GX110               
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 731MHz, id 0x686
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  , GX110  ,00000007>, AslId <ASL ,00000061>
LNKA: ACPI: Found matching pin for 0.1.INTA at func 0: 9
LNKD: ACPI: Found matching pin for 0.31.INTD at func 2: 11
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 10
LNKC: ACPI: Found matching pin for 1.12.INTA at func 0: 5
LNKA: ACPI: Found matching pin for 1.7.INTA at func 0: 9
LNKB: ACPI: Found matching pin for 1.8.INTA at func 0: 10
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (FPU, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPK, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
PRT (PNP0401) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7124 (rev. 0x03)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
vga1 at pci0 dev 1 function 0: vendor 0x8086 product 0x7125 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2418 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
eap0 at pci1 dev 7 function 0: vendor 0x1274 product 0x1371 ES1371-B (rev. 0x09)
eap0: interrupting at irq 9
eap0: ac97: Crystal CS4297A codec; headphone, 20 bit DAC, 18 bit ADC, Crystal 
Semi 3D
eap0: ac97: ext id 200<AMAP>
audio0 at eap0: full duplex, mmap, independent
midi1 at eap0: AudioPCI MIDI UART
fxp0 at pci1 dev 8 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:90:27:a8:7e:60
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0 at pci1 dev 12 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 
0x78)
ex0: interrupting at irq 5
ex0: MAC address 00:b0:d0:80:38:c3
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 7
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2410 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2412 (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2413 (rev. 0x02)
ichsmb0: SMBus disabled
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <Maxtor 51023H2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9765 MB, 19841 cyl, 16 head, 63 sec, 512 bytes/sect x 19999728 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8482B, , 1.05> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

>How-To-Repeat:

        Insert a CD.  Observe the system wedge.

>Fix:

        Yes, please.
Prev by Date: NetBSD Nightly Trouble Ticket Report
Next by Date: Re: port-i386/39427 (acpibat: failed to evaluate _BIF: AE_AML_MUTEX_ORDER)
Previous by Thread: Re: kern/41598: [USB][usb.c][usb_task_thread]when the function tsleep() be called, this may cause the system disable the interrupt a long time in some system.
Next by Thread: Re: port-i386/39427 (acpibat: failed to evaluate _BIF: AE_AML_MUTEX_ORDER)
Indexes:
Home | Main Index | Thread Index | Old Index