port-alpha/40748: DECpc 150 AXP / DEC200/300 ("Jensen") fails to boot 5.0_RC2

[igyenes%gmail.com@localhost]

>Number:         40748
>Category:       port-alpha
>Synopsis:       DECpc 150 AXP / DEC200/300 ("Jensen") fails to boot 5.0_RC2
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    port-alpha-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Feb 24 22:45:00 +0000 2009
>Originator:     Istvan Gyenes
>Release:        5.0_RC2
>Organization:
>Environment:
>Description:
5.0_RC2 still fails to boot on Jensen the kernel just hangs. Log below.
There were some progress to get the Jensen alive (NetBSD Problem Report 
#36628), but it was just a partial success because of lack of hardware.
If someone is willing to solve the Jensen (probably EISA realted) booting 
problems, I will donate a physical HW (64MB RAM, 2 SCSI controllers, DE422 EISA 
network card) to that developer.


Boot log:

NetBSD/alpha 5.0_RC2 ustar Bootstrap, Revision 1.3
(builds%b4.netbsd.org@localhost, Mon Feb  9 04:24:54 UTC 2009)

VMS PAL rev: 0x100010530
OSF PAL rev: 0x20123
Switch to OSF PAL code succeeded.

Boot flags: 0,0
9780096+330848=0x9a4da0

Entering netbsd at 0xfffffc0000301130...
Unrecognized boot flag '0'.
Unrecognized boot flag ','.
Unrecognized boot flag '0'.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_RC2 (INSTALL) #0: Mon Feb  9 04:58:21 UTC 2009
        
builds%b4.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-RC2/alpha/200902090142Z-
obj/home/builds/ab/netbsd-5-0-RC2/src/sys/arch/alpha/compile/INSTALL
DEC2000 model 300, 150MHz, s/n
8192 byte page size, 1 processor.
total memory = 128 MB
(2048 KB reserved for PROM, 126 MB used by NetBSD)
avail memory = 114 MB
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064-0
jensenio0 at mainbus0
pckbc0 at jensenio0 port 0x60
com0 at jensenio0 port 0x3f8: ns8250 or ns16450, no fifo
com0: console
com0: interrupting at vector 0x900
com1 at jensenio0 port 0x2f8: ns8250 or ns16450, no fifo
com1: interrupting at vector 0x920
lpt0 at jensenio0 port 0x3bc
lpt0: interrupting at eisa irq 1
mcclock0 at jensenio0 port 0x170: mc146818 compatible time-of-day clock
eisa0 at jensenio0
device CPQ3111 at eisa0 slot 1 not configured
depca2 at eisa0 slot 2: DEC DE422 Ethernet
depca2: shared memory at 0xd0000-0xdffff
le0 at depca2
le0: failed to clear memory at 0 (0xff != 0xaa)
ahb0 at eisa0 slot 5: Adaptec AHA-1742A SCSI
ahb0: interrupting at eisa irq 12
scsibus0 at ahb0: 8 targets, 8 luns per target
ahb1 at eisa0 slot 6: Adaptec AHA-1740A SCSI
ahb1: interrupting at eisa irq 14
scsibus1 at ahb1: 8 targets, 8 luns per target
isa0 at jensenio0
>How-To-Repeat:
Try to boot the 5-0_RC2 CD on Jensen
>Fix: