misc/38727: PS/2 mouse port is not being detected

To: misc-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: misc/38727: PS/2 mouse port is not being detected
From: cberardi24%gmail.com@localhost
Date: Thu, 22 May 2008 11:45:00 +0000 (UTC)
>Number:         38727
>Category:       misc
>Synopsis:       PS/2 mouse port is not being detected
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    misc-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu May 22 11:45:00 +0000 2008
>Originator:     Christopher Berardi
>Release:        NetBSD 4.0
>Organization:
>Environment:
NetBSD 4.0 NetBSD 4.0 (GERNERIC) #0: Sun Dec 16 00:20:10 PST 2007 
builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
 i386
>Description:
Hello,

I wasn't able to get the mouse working under X - mouse cursor was
there, no movement - and I have come to see that the PS/2 mouse port
is not being detected at all. I am using a cheap HP PS/2 ball mouse
with a scroll wheel. I switched the mouse to an USB mouse  (Logitech
Click! Optical Mouse) with a PS/2 adapter - it won't work if it is
plugged into the PS/2 port, but it will if it is plugged into the USB
port. If I dmesg, there is no mention of wsmouse (or mouse of any
other flavor). The PS/2 port does work on other OS's (dual-boots Slackware and 
Windows). I have been using the GENERIC kernel, but I also tried the GENERIC.MP 
kernel, with the same results.


Hardware:

HP Pavillion a1750e
AMD Athalon 64 X2 4600+ 2.4GHz CPU
ASUS A8M2N-LA (Nodus 3) Motherboard
1GB RAM


dmesg: 

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
       builds <at> 
wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 1022 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 994 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf2030
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon 64 X2 (686-class), 2405.15 MHz, id 0x40fb2
cpu0: features ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2 2001<SSE3>
cpu0: "AMD Athlon(tm) 64 X2 Dual Core Processor 4600+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS>
cpu0: AMD PowerNow! Technology 2400 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000 2200 2400
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: not started
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <HPQOEM,SLIC-CPC,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A08 [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43
PNP0103 [HPET Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 73.0C
acpitz0: critical 75.0C passive 40.0C
pcppi1: attached to attimer1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA product 0x02f0 (RAM memory, revision 0xa2) at pci0 dev 0
function 0 not configured
NVIDIA product 0x02fa (RAM memory, revision 0xa2) at pci0 dev 0
function 1 not configured
NVIDIA product 0x02fe (RAM memory, revision 0xa2) at pci0 dev 0
function 2 not configured
NVIDIA product 0x02f8 (RAM memory, revision 0xa2) at pci0 dev 0
function 3 not configured
NVIDIA product 0x02f9 (RAM memory, revision 0xa2) at pci0 dev 0
function 4 not configured
NVIDIA product 0x02ff (RAM memory, revision 0xa2) at pci0 dev 0
function 5 not configured
NVIDIA product 0x027f (RAM memory, revision 0xa2) at pci0 dev 0
function 6 not configured
NVIDIA product 0x027e (RAM memory, revision 0xa2) at pci0 dev 0
function 7 not configured
ppb0 at pci0 dev 2 function 0: NVIDIA product 0x02fc (rev. 0xa1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 4 function 0: NVIDIA product 0x02fb (rev. 0xa1)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci2 dev 0 function 0: NVIDIA product 0x01d0 (rev. 0xa1)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
NVIDIA product 0x0270 (RAM memory, revision 0xa2) at pci0 dev 9
function 0 not configured
pcib0 at pci0 dev 10 function 0
pcib0: NVIDIA nForce430 PCI-ISA bridge (rev. 0xa3)
NVIDIA nForce430 SMBus Controller (SMBus serial bus, revision 0xa3) at
pci0 dev 10 function 1 not configured
NVIDIA product 0x0272 (RAM memory, revision 0xa3) at pci0 dev 10
function 2 not configured
ohci0 at pci0 dev 11 function 0: NVIDIA nForce430 USB Controller (rev. 0xa3)
APCF: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0 at pci0 dev 11 function 1: NVIDIA nForce430 USB2 Controller (rev. 0xa3)
APCL: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21 (irq 11)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 8 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
viaide0 at pci0 dev 13 function 0
viaide0: NVIDIA nForce430 IDE Controller (rev. 0xa1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 14 function 0
viaide1: NVIDIA nForce430 Serial ATA Controller (rev. 0xa1)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
APSI: Picked IRQ 22 with weight 0
viaide1: using ioapic0 pin 22 (irq 11) for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 15 function 0
viaide2: NVIDIA nForce430 Serial ATA Controller (rev. 0xa1)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
APSJ: Picked IRQ 23 with weight 0
viaide2: using ioapic0 pin 23 (irq 10) for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb2 at pci0 dev 16 function 0: NVIDIA product 0x026f (rev. 0xa2)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
fwohci0 at pci3 dev 5 function 0: Lucent Technologies FW322/323 IEEE
1394 Host Controller (rev. 0x70)
APC4: Picked IRQ 19 with weight 0
fwohci0: interrupting at ioapic0 pin 19 (irq 7)
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:d8:00:01:22:17:99
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 1024 bytes.
fwohci0: max_rec 1024 -> 2048
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
azalia0 at pci0 dev 16 function 1: Generic High Definition Audio Controller
AAZA: Picked IRQ 20 with weight 1
azalia0: interrupting at ioapic0 pin 20 (irq 11)
azalia0: host: NVIDIA nForce430 High Definition Audio Controller (rev. 162)
azalia0: host: High Definition Audio rev. 1.0
nfe0 at pci0 dev 20 function 0: NVIDIA nForce430 Gigabit Ethernet
Controller (rev. 0xa3)
APCH: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21 (irq 5)
nfe0: Ethernet address 00:1a:92:51:e4:0d
ukphy0 at nfe0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x0022, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Realtek ALC888 (rev. 0.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM
formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=4, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorpCD/DVDW TS-H652M, , 0414> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
viaide1 port 0: device present, speed: 3.0Gb/s
wd0 at atabus2 drive 0: <WDC WD1600JS-60NCB1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
umass0 at uhub1 port 8 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, USB SD Reader, 1.00> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Generic, USB CF Reader, 1.01> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <Generic, USB SM Reader, 1.02> disk removable
sd2: drive offline
sd3 at scsibus0 target 0 lun 3: <Generic, USB MS Reader, 1.03> disk removable
sd3: drive offline
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
   SENSE KEY:  Not Ready
 COMMAND INFO:  11162944 (0xaa5540)
    ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
The problem is continual - there is never a boot-up where the PS/2 port is 
detected. 
>Fix:
Prev by Date: kern/38726: Update spdmem driver for DDR3 memory
Next by Date: lib/38728: add support Camellia for openssl
Previous by Thread: kern/38726: Update spdmem driver for DDR3 memory
Next by Thread: lib/38728: add support Camellia for openssl
Indexes:
Home | Main Index | Thread Index | Old Index