Re: port-amd64/34323 (amd64 INSTALL kernel crashes at i2o device(s) probe in the boot sequence)

To: port-amd64-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,karino%da.jp.nec.com@localhost
Subject: Re: port-amd64/34323 (amd64 INSTALL kernel crashes at i2o device(s) probe in the boot sequence)
From: KARINO Shuichi <karino%da.jp.nec.com@localhost> (狩野秀一)
Date: Tue, 13 May 2008 04:10:03 +0000 (UTC)
The following reply was made to PR port-amd64/34323; it has been noted by GNATS.

From: KARINO Shuichi <karino%da.jp.nec.com@localhost> 
(=?iso-2022-jp?B?GyRCPG1Mbj0oMGwbKEI=?=)
To: gnats-bugs%NetBSD.org@localhost, ad%NetBSD.org@localhost
Cc: port-amd64-maintainer%NetBSD.org@localhost, 
netbsd-bugs%NetBSD.org@localhost,
        gnats-admin%NetBSD.org@localhost
Subject: Re: port-amd64/34323 (amd64 INSTALL kernel crashes at i2o
 device(s) probe in the boot sequence)
Date: Tue, 13 May 2008 12:59:16 +0900 (JST)

 Thanks for bug fix.
 The problem doesn't occur with Netbsd-current (4.99.62).
 
 ----------------------------------------------------------------
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.62 (INSTALL) #0: Sun May 11 01:58:22 PDT 2008
        
builds@wb28:/home/builds/ab/HEAD/amd64/200805110002Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/INSTALL
 total memory = 2047 MB
 avail memory = 1961 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 SMBIOS rev. 2.3 @ 0xef500 (77 entries)
 NEC Express5800/120Rf-1 [N8100-1058]         (FR1.1)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: (boot processor)
 cpu0:                   Intel(R) Xeon(TM) CPU 3.60GHz, 3591.11 MHz
 cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
 cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
 cpu0: features2 659d<SSE3,DTES64,MONITOR,DS-CPL,EST,TM2,CID,CX16,xTPR>
 cpu0: features3 bfebfbff<SYSCALL/SYSRET,EM64T>
 cpu0: L2 cache 2 MB 64B/line 8-way
 cpu0: Initial APIC ID 0
 cpu0: Cluster/Package ID 0
 cpu0: SMT ID 0
 cpu0: Enhanced SpeedStep disabled by BIOS
 cpu0: calibrating local timer
 cpu0: apic clock running at 199 MHz
 cpu0: 64 page colors
 cpu1 at mainbus0 apid 1: (application processor)
 cpu1:                   Intel(R) Xeon(TM) CPU 3.60GHz, 3591.19 MHz
 cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
 cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
 cpu1: features2 659d<SSE3,DTES64,MONITOR,DS-CPL,EST,TM2,CID,CX16,xTPR>
 cpu1: features3 bfebfbff<SYSCALL/SYSRET,EM64T>
 cpu1: L2 cache 2 MB 64B/line 8-way
 cpu1: Initial APIC ID 1
 cpu1: Cluster/Package ID 0
 cpu1: SMT ID 1
 cpu1: Enhanced SpeedStep disabled by BIOS
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20080321
 acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
 PCI0 (PNP0A03) at acpi0 not configured
 MBRD (PNP0C02) at acpi0 not configured
 DMAC (PNP0200) at acpi0 not configured
 MATH (PNP0C04) at acpi0 not configured
 PIC (PNP0000) at acpi0 not configured
 RTC (PNP0B00) at acpi0 not configured
 pcppi1 at acpi0 (SPKR, PNP0800)
 pcppi1: io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 attimer1 at acpi0 (TIMR, PNP0100): AT Timer
 attimer1: io 0x40-0x43,0x50-0x53 irq 0
 LNKA (PNP0C0F) at acpi0 not configured
 LNKB (PNP0C0F) at acpi0 not configured
 LNKC (PNP0C0F) at acpi0 not configured
 LNKD (PNP0C0F) at acpi0 not configured
 LNKH (PNP0C0F) at acpi0 not configured
 pckbc1 at acpi0 (KBC0, PNP0303): kbd port
 pckbc1: io 0x60,0x64 irq 1
 pckbc2 at acpi0 (MSE0, PNP0F13): aux port
 pckbc2: irq 12
 SIO (PNP0A05) at acpi0 not configured
 FDC (PNP0700) at acpi0 not configured
 COMB (PNP0501) at acpi0 not configured
 COMA (PNP0501) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x8086 product 0x3590 (rev. 0x0c)
 vendor 0x8086 product 0x3591 (undefined subclass 0x00, revision 0x0c) at pci0 
dev 0 function 1 not configured
 vendor 0x8086 product 0x3594 (miscellaneous system, revision 0x0c) at pci0 dev 
1 function 0 not configured
 ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x3595 (rev. 0x0c)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 0x09)
 ppb1: disabling notification events
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 wm0 at pci2 dev 1 function 0: Intel i82546GB 1000BASE-T Ethernet, rev. 3
 wm0: interrupting at ioapic0 pin 16 (irq 10)
 wm0: 64-bit 66MHz PCI bus
 wm0: 256 word (8 address bits) MicroWire EEPROM
 wm0: Ethernet address 00:11:09:5c:20:9c
 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 wm1 at pci2 dev 1 function 1: Intel i82546GB 1000BASE-T Ethernet, rev. 3
 wm1: interrupting at ioapic0 pin 17 (irq 10)
 wm1: 64-bit 66MHz PCI bus
 wm1: 256 word (8 address bits) MicroWire EEPROM
 wm1: Ethernet address 00:11:09:5c:20:9d
 makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
 makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 iop0 at pci2 dev 2 function 0: I2O adapter <ADAPTEC 2010S>
 iop0: interrupting at ioapic0 pin 16 (irq 10)
 ppb2 at pci1 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 0x09)
 ppb2: disabling notification events
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 wm2 at pci3 dev 7 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
 wm2: interrupting at ioapic0 pin 16 (irq 10)
 wm2: 64-bit 133MHz PCIX bus
 wm2: 256 word (8 address bits) MicroWire EEPROM
 wm2: Ethernet address 00:0e:0c:83:58:66
 makphy2 at wm2 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
 makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 wm3 at pci3 dev 7 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
 wm3: interrupting at ioapic0 pin 17 (irq 10)
 wm3: 64-bit 133MHz PCIX bus
 wm3: 256 word (8 address bits) MicroWire EEPROM
 wm3: Ethernet address 00:0e:0c:83:58:67
 makphy3 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
 makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x3597 (rev. 0x0c)
 pci4 at ppb3 bus 4
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x3598 (rev. 0x0c)
 pci5 at ppb4 bus 5
 pci5: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb5 at pci0 dev 6 function 0: vendor 0x8086 product 0x3599 (rev. 0x0c)
 pci6 at ppb5 bus 6
 pci6: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb6 at pci0 dev 7 function 0: vendor 0x8086 product 0x359a (rev. 0x0c)
 pci7 at ppb6 bus 7
 pci7: i/o space, memory space enabled, rd/line, wr/inv ok
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24d2 (rev. 0x02)
 uhci0: interrupting at ioapic0 pin 16 (irq 10)
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24d4 (rev. 0x02)
 uhci1: interrupting at ioapic0 pin 19 (irq 10)
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24d7 (rev. 0x02)
 uhci2: interrupting at ioapic0 pin 18 (irq 10)
 usb2 at uhci2: USB revision 1.0
 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x24de (rev. 0x02)
 uhci3: interrupting at ioapic0 pin 16 (irq 10)
 usb3 at uhci3: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24dd (rev. 0x02)
 ehci0: interrupting at ioapic0 pin 23 (irq 10)
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
 usb4 at ehci0: USB revision 2.0
 ppb7 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xc2)
 pci8 at ppb7 bus 8
 pci8: i/o space, memory space enabled
 vga0 at pci8 dev 4 function 0: vendor 0x1002 product 0x5159 (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 pcib0 at pci0 dev 31 function 0
 pcib0: vendor 0x8086 product 0x24d0 (rev. 0x02)
 piixide0 at pci0 dev 31 function 1
 piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus1 at piixide0 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x24d3 (rev. 0x02)
 ichsmb0: interrupting at ioapic0 pin 17 (irq 10)
 iic0 at ichsmb0: I2C bus
 isa0 at pcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 ERROR: 284 cycle TSC drift observed
 atapibus0 at atabus0: 2 targets
 iop0: configuring...
 cd0 at atapibus0 drive 0: <SR244W, , T02D> cdrom removable
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 uhub0 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 cd0: 32-bit data port
 uhub1 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 8 ports with 8 removable, self powered
 uhub2 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 device (class 0xffffffff) at iop0 tid 0 not configured
 ld0 at iop0 tid 515: <MAXTOR  A, ATLAS10K5_73SCA, JNZUD> direct access, fixed
 ld0: 69809 MB, 8899 cyl, 255 head, 63 sec, 512 bytes/sect x 142969663 sectors
 iopsp0 at iop0 tid 8: SCSI port <ADAPTEC, AIC-7902, 00000001>
 iopsp0: 16-bit, max sync rate 160MHz, initiator ID 7
 scsibus0 at iopsp0: 16 targets, 8 luns per target
 iopsp1 at iop0 tid 9: SCSI port <ADAPTEC, AIC-7902, 00000001>
 iopsp1: 16-bit, max sync rate 160MHz, initiator ID 7
 iopsp1: target 0 (tid 513): 16-bit, synchronous at 156MHz, offset 0x40
 iopsp1: target 0,0 (tid 513): in use by tid 515
 iopsp1: target 9 (tid 514): 8-bit, asynchronous
 scsibus1 at iopsp1: 16 targets, 8 luns per target
 ses0 at scsibus1 target 9 lun 0: <SDR, GEM318, 0> processor fixed
 ses0: SAF-TE Compliant Device
 Kernelized RAIDframe activated
 md0: internal 5000 KB image area
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio0 at pad0: half duplex
 boot device: <unknown>
 root on md0a dumps on md0b
 root file system type: ffs
 WARNING: clock gained 2 days
 WARNING: CHECK AND RESET THE DATE!
 warning: no /dev/console
 ----------------------------------------------------------------
 
 Best Regards.
 
 From: ad%NetBSD.org@localhost
 Message-ID: <20080511225337.9262E63B293%narn.NetBSD.org@localhost>
 
 > Synopsis: amd64 INSTALL kernel crashes at i2o device(s) probe in the boot 
 > sequence
 > 
 > State-Changed-From-To: open->feedback
 > State-Changed-By: ad%NetBSD.org@localhost
 > State-Changed-When: Sun, 11 May 2008 22:53:36 +0000
 > State-Changed-Why:
 > There was a bug in the code that has been fixed.
 > Does the problem still occur with NetBSD-current?
 
 --
 Shuichi Karino (NEC System IP Core Research Labs.)
Prev by Date: Re: port-amd64/34323 (amd64 INSTALL kernel crashes at i2o device(s) probe in the boot sequence)
Next by Date: Re: lib/17631 (libcdk, refreshCDKScreen() doesn't refresh, perhaps intended?)
Previous by Thread: Re: port-amd64/34323 (amd64 INSTALL kernel crashes at i2o device(s) probe in the boot sequence)
Next by Thread: Re: port-amd64/34323 (amd64 INSTALL kernel crashes at i2o device(s) probe in the boot sequence)
Indexes:
Home | Main Index | Thread Index | Old Index