misc/38444: HP 6715s overheating

To: misc-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: misc/38444: HP 6715s overheating
From: need4spam%bk.ru@localhost
Date: Wed, 16 Apr 2008 20:05:01 +0000 (UTC)
>Number:         38444
>Category:       misc
>Synopsis:       HP 6715s overheating
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    misc-bug-people
>State:          open
>Class:          support
>Submitter-Id:   net
>Arrival-Date:   Wed Apr 16 20:05:00 +0000 2008
>Originator:     Alexey
>Release:        4.0
>Organization:
Opticom LLC
>Environment:
NetBSD 4.0 RELEASE amd64
>Description:
While using NetBSD i don't hear any CPU cooler sounds. So after 5-10 minutes my 
TurionX2 box shuting down. After booting up again cooler becomes loud like hell 
and very hot.

Sorry, but because of this and that( 
http://www.netbsd.org/cgi-bin/sendpr.cgi?gndb=netbsd ) problems i can't go to 
internet under NetBSD so,here is some usefull(?) data from FreeBSD 7.0 on same 
hardware:

#sysctl -a | grep acpi 
debug.acpi.suspend_bounce: 0
debug.acpi.do_powerstate: 1
debug.acpi.acpi_ca_version: 20070320
debug.acpi.ec.timeout: 750
debug.acpi.ec.polled: 0
debug.acpi.ec.burst: 0
debug.acpi.semaphore_debug: 0
debug.acpi.resume_beep: 0
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 1
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.battery.life: 98
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 51.0C
hw.acpi.thermal.tz0.active: 3
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 95.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 105.0C
hw.acpi.thermal.tz0._ACx: 75.0C 65.0C 55.0C 15.9C -1 -1 -1 -1 -1 -1
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1040560
dev.acpi.0.%desc: HPQOEM SLIC-MPC
dev.acpi.0.%driver: acpi
dev.acpi.0.%parent: nexus0
dev.acpi_sysresource.0.%desc: System Resource
dev.acpi_sysresource.0.%driver: acpi_sysresource
dev.acpi_sysresource.0.%location: handle=\_SB_.C011
dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0
dev.acpi_sysresource.0.%parent: acpi0
dev.acpi_sysresource.1.%desc: System Resource
dev.acpi_sysresource.1.%driver: acpi_sysresource
dev.acpi_sysresource.1.%location: handle=\_SB_.C08B.C0FE.C37A
dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=2
dev.acpi_sysresource.1.%parent: acpi0
dev.acpi_sysresource.2.%desc: System Resource
dev.acpi_sysresource.2.%driver: acpi_sysresource
dev.acpi_sysresource.2.%location: handle=\_SB_.C08B.C378
dev.acpi_sysresource.2.%pnpinfo: _HID=PNP0C02 _UID=1
dev.acpi_sysresource.2.%parent: acpi0
dev.acpi_sysresource.3.%desc: System Resource
dev.acpi_sysresource.3.%driver: acpi_sysresource
dev.acpi_sysresource.3.%location: handle=\_SB_.C35F
dev.acpi_sysresource.3.%pnpinfo: _HID=PNP0C02 _UID=0
dev.acpi_sysresource.3.%parent: acpi0
dev.acpi_timer.0.%desc: 32-bit timer at 3.579545MHz
dev.acpi_timer.0.%driver: acpi_timer
dev.acpi_timer.0.%location: unknown
dev.acpi_timer.0.%pnpinfo: unknown
dev.acpi_timer.0.%parent: acpi0
dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x11
dev.acpi_ec.0.%driver: acpi_ec
dev.acpi_ec.0.%location: handle=\_SB_.C08B.C0FE.C172
dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0
dev.acpi_ec.0.%parent: acpi0
dev.pci_link.0.%parent: acpi0
dev.pci_link.1.%parent: acpi0
dev.pci_link.2.%parent: acpi0
dev.pci_link.3.%parent: acpi0
dev.pci_link.4.%parent: acpi0
dev.pci_link.5.%parent: acpi0
dev.pci_link.6.%parent: acpi0
dev.pci_link.7.%parent: acpi0
dev.cpu.0.%parent: acpi0
dev.cpu.1.%parent: acpi0
dev.acpi_perf.0.%driver: acpi_perf
dev.acpi_perf.0.%parent: cpu0
dev.acpi_perf.1.%driver: acpi_perf
dev.acpi_perf.1.%parent: cpu1
dev.acpi_throttle.0.%desc: ACPI CPU Throttling
dev.acpi_throttle.0.%driver: acpi_throttle
dev.acpi_throttle.0.%parent: cpu0
dev.acpi_throttle.0.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1 5000/-1 
3750/-1 2500/-1 1250/-1
dev.pcib.0.%parent: acpi0
dev.battery.0.%parent: acpi0
dev.battery.1.%parent: acpi0
dev.acpi_acad.0.%desc: AC Adapter
dev.acpi_acad.0.%driver: acpi_acad
dev.acpi_acad.0.%location: handle=\_SB_.C1EB
dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0
dev.acpi_acad.0.%parent: acpi0
dev.acpi_button.0.%desc: Sleep Button
dev.acpi_button.0.%driver: acpi_button
dev.acpi_button.0.%location: handle=\_SB_.C28D
dev.acpi_button.0.%pnpinfo: _HID=PNP0C0E _UID=0
dev.acpi_button.0.%parent: acpi0
dev.acpi_lid.0.%desc: Control Method Lid Switch
dev.acpi_lid.0.%driver: acpi_lid
dev.acpi_lid.0.%location: handle=\_SB_.C265
dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0
dev.acpi_lid.0.%parent: acpi0
dev.acpi_tz.0.%desc: Thermal Zone
dev.acpi_tz.0.%driver: acpi_tz
dev.acpi_tz.0.%location: handle=\_TZ_.TZ1_
dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0
dev.acpi_tz.0.%parent: acpi0
dev.npxisa.0.%parent: acpi0
dev.attimer.0.%parent: acpi0
dev.attimer.1.%parent: acpi0
dev.atdma.0.%parent: acpi0
dev.atkbdc.0.%parent: acpi0
dev.psmcpnp.0.%parent: acpi0
dev.atpic.0.%parent: acpi0


# pciconf -lcv 
hostb0@pci0:0:0:0:      class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:       class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 
hdr=0x01
    vendor     = 'ATI Technologies Inc'
    class      = bridge
    subclass   = PCI-PCI
    cap 08[44] = HT MSI fixed address window enabled at 0xfee00000
    cap 0d[b0] = PCI Bridge card=0x30c2103c
pcib2@pci0:0:4:0:       class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 
hdr=0x01
    vendor     = 'ATI Technologies Inc'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 1 root port
    cap 05[80] = MSI supports 1 message 
    cap 0d[b0] = PCI Bridge card=0x30c2103c
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
pcib3@pci0:0:5:0:       class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 
hdr=0x01
    vendor     = 'ATI Technologies Inc'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 1 root port
    cap 05[80] = MSI supports 1 message 
    cap 0d[b0] = PCI Bridge card=0x30c2103c
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
pcib4@pci0:0:6:0:       class=0x060400 card=0x30c2103c chip=0x79161002 rev=0x00 
hdr=0x01
    vendor     = 'ATI Technologies Inc'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 1 root port
    cap 05[80] = MSI supports 1 message 
    cap 0d[b0] = PCI Bridge card=0x30c2103c
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
atapci0@pci0:0:18:0:    class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 Serial ATA Controller'
    class      = mass storage
    subclass   = ATA
    cap 01[60] = powerspec 2  supports D0 D3  current D0
ohci0@pci0:0:19:0:      class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 USB Controller (OHCI0)'
    class      = serial bus
    subclass   = USB
ohci1@pci0:0:19:1:      class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 USB Controller (OHCI1)'
    class      = serial bus
    subclass   = USB
ohci2@pci0:0:19:2:      class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 USB Controller (OHCI2)'
    class      = serial bus
    subclass   = USB
ohci3@pci0:0:19:3:      class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 USB Controller (OHCI3)'
    class      = serial bus
    subclass   = USB
ohci4@pci0:0:19:4:      class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 USB Controller (OHCI4)'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:19:5:      class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 USB Controller (EHCI)'
    class      = serial bus
    subclass   = USB
    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0@pci0:0:20:0:      class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 SMBUS Controller'
    class      = serial bus
    subclass   = SMBus
    cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000
atapci1@pci0:0:20:1:    class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 ATA Controller'
    class      = mass storage
    subclass   = ATA
hdaudio0@pci0:0:20:2:   class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 High Definition Audio Controller'
    class      = multimedia
    cap 01[50] = powerspec 2  supports D0 D3  current D0
isab0@pci0:0:20:3:      class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 PCI to LPC Bridge'
    class      = bridge
    subclass   = PCI-ISA
pcib5@pci0:0:20:4:      class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 
hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'IXP SB600 PCI to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
hostb1@pci0:0:24:0:     class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron HyperTransport Technology 
Configuration'
    class      = bridge
    subclass   = HOST-PCI
    cap 08[80] = HT host
hostb2@pci0:0:24:1:     class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:0:24:2:     class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:0:24:3:     class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(K8) Athlon 64/Opteron Miscellaneous Control'
    class      = bridge
    subclass   = HOST-PCI
    cap 0f[f0] = unknown
vgapci0@pci0:1:5:0:     class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 
hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'RS690 ATI Mobility Radeon x1250'
    class      = display
    subclass   = VGA
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 05[80] = MSI supports 1 message, 64 bit 
bge0@pci0:16:0:0:       class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetLink BCM5906M Fast Ethernet PCIe'
    class      = network
    subclass   = ethernet
    cap 01[48] = powerspec 3  supports D0 D3  current D0
    cap 03[50] = VPD
    cap 09[58] = vendor (length 120)
    cap 05[e8] = MSI supports 1 message, 64 bit 
    cap 10[d0] = PCI-Express 1 endpoint
ndis0@pci0:48:0:0:      class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM4310 broadcom wireless 1490 (dell)'
    class      = network
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 09[58] = vendor (length 120)
    cap 05[e8] = MSI supports 1 message, 64 bit 
    cap 10[d0] = PCI-Express 1 endpoint
cbb0@pci0:2:4:0:        class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 
hdr=0x02
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'unknown Ricoh R/RL/5C476(II)'
    class      = bridge
    subclass   = PCI-CardBus
    cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0

>How-To-Repeat:
Install NetBSD on same/similar notebook
>Fix:
Follow-Ups:
- Re: misc/38444: HP 6715s overheating
  - From: Jared D. McNeill
Prev by Date: NetBSD Nightly Trouble Ticket Report
Next by Date: kern/38448: ffs_vfsops.c:ffs_mount() returns EINVAL in some cases, causing an extra reboot via /etc/rc.d/fsck
Previous by Thread: Re: toolchain/24457 (metalog contains incorrect information for hard links)
Next by Thread: Re: misc/38444: HP 6715s overheating
Indexes:
Home | Main Index | Thread Index | Old Index