The following reply was made to PR kern/25462; it has been noted by GNATS.

From: Bernd Ernesti <netbsd@lists.veego.de>
To: gnats-bugs@NetBSD.org, Rafal Boni <rafal@pobox.com>
Cc: 
Subject: Re: kern/25462
Date: Wed, 28 Nov 2007 08:41:24 +0100

 [Full quoting to get this into the database]
 
 Note: you need to add a 'Re: ' in front of the pr number, like this
 subject uses to get it into the database.
 
 Bernd
 
 On Tue, Nov 27, 2007 at 08:48:32PM -0500, Rafal Boni wrote:
 > Erik Fair wrote:
 > > NetBSD 3.1_STABLE works for me without IDE complaint on the Sun Netra T1
 > > AC200, and its successor, the Sun Fire V120, with the caveat that I have
 > > not used optical media on these systems yet, just boot/probe/autoconfig.
 > > I can send dmesg.txt from either system if asked.
 > > 
 > > So, what changed between 3.1 and 4?
 > 
 > I'm not sure what changed, but the contents of the bug claims that on
 > machines where it doesn't work, it doesn't work as far back as 1.6.  I'm
 > going to try 3.1_STABLE on my AC200 and will report what I see.
 > 
 > --rafal
 > 
 > For GNATS benefit, here's the original comments I added, that somehow
 > didn't get into the PR (either I sent to the wrong address or GNATS
 > somehow ate my original attempts):
 > 
 > I'm seeing this same issue on a "new" (to me) Netra T1 AC200.  A couple
 > of interesting additions:
 > 
 > 1. aceride0 (the on-board IDE controller supporting the CD-ROM) is also
 > complaining of lost-interrupt messages during the bus probe.  I presume
 > this and the SCSI timeout are caused by some system-wide interrupt
 > routing issue.
 > 
 > 2. The hardware is fine; OpenBSD 4.2 installed on it A-OK (I didn't have
 > Solaris media and wanted to verify that all system components were happy
 > before my eBay non-DOA warranty ran out ;)).
 > 
 > This was with a INSTALL kernel from a 2007-11-23 HEAD snapshot:
 > 
 > NetBSD 4.99.37 (INSTALL) #0: Fri Nov 23 07:40:58 PST 2007
 > builds@wb44:/home/builds/ab/HEAD/sparc64/200711230002Z-obj/home/builds/ab/HEAD/src/sys/arch/sparc64/compile/INSTALL
 >