Subject: Re: kern/32446
To: None <kern-bug-people@netbsd.org, gnats-admin@netbsd.org,>
From: Mark Weinem <mark.weinem@alumni.uni-due.de>
List: netbsd-bugs
Date: 08/05/2007 23:35:02
The following reply was made to PR kern/32446; it has been noted by GNATS.
From: Mark Weinem <mark.weinem@alumni.uni-due.de>
To: gnats-bugs@netbsd.org
Cc:
Subject: Re: kern/32446
Date: Mon, 6 Aug 2007 01:32:36 +0200 (CEST)
This panic is still reproducible on NetBSD 4.0_BETA2
Architecture: Xen and i386
System: NetBSD 4.0_BETA2 (XEN3_DOM0) #0: Wed Jun 20 03:49:34 PDT 2007 builds@wb33:/home/builds/ab/netbsd-4/i386/200706190002Z-obj/home/builds/ab/netbsd-4/src/sys/arch/i386/compile/XEN3_DOM0 i386
This is with NetBSD/Xen but the panic happens also with NetBSD/i386 (GENERIC)
------
dmesg:
NetBSD 4.0_BETA2 (XEN3_DOM0) #0: Wed Jun 20 03:49:34 PDT 2007
builds@wb33:/home/builds/ab/netbsd-4/i386/200706190002Z-obj/home/builds/ab/netbsd-4/src/sys/arch/i386/compile/XEN3_DOM0
total memory = 146 MB
avail memory = 133 MB
timecounter: Timecounters tick every 10.000 msec
BIOS32 rev. 0 found at 0xfd780
mainbus0 (root)
mainbus0: scanning 0x9e000 to 0x9e3f0 for MP signature
mainbus0: scanning 0x9dc00 to 0x9dff0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf73b0
mainbus0: MP config table at 0x9e481, 240 bytes long
cpu0 at mainbus0: apid 0 (boot processor)
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 14, 24 pins
ioapic0: enabling
hypervisor0 at mainbus0
vcpu0 at hypervisor0: (uniprocessor)
vcpu0: AMD Unknown K7 (Athlon) (686-class), 1800.06 MHz, id 0x20ff2
vcpu0: features 78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
vcpu0: features 78bfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMX>
vcpu0: features 78bfbff<FXSR,SSE,SSE2>
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
npx0 at hypervisor0: using exception 16
acpi0 at hypervisor0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <PTLTD , XSDT ,00050000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 3 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: 4 PCI busses
mpacpi: ISA interrupt override 0 -> 2
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 2 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 2 INT_B (type 0<type=0> flags
ioapic0: pin 18 attached to pci0 device 2 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 3 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 3 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 3 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 3 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 6 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 6 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 6 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci0 device 7 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci0 device 7 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci0 device 7 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 7 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 9 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 10 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 10 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 10 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 10 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 12 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 12 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 12 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 12 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 31 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci1 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci1 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci1 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci1 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci3 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci3 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci3 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci3 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci2 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 21 attached to pci2 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 22 attached to pci2 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci2 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int9 1a9a0<vector=a0,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0A05 [Generic Container Device] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0401 [ECP printer port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
pci0 at hypervisor0 bus 0: configuration mode 1hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System 761 Host Bridge (rev. 0x01)
agp0 at pchb0: aperture at 0xf8000000, size 0x400000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C202 (rev.
0x00)
pci1 at ppb0 bus 1ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Silicon Integrated System product 0x6330
(rev. 0x03)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 965 Host Bridge (rev. 0x48)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated Systems 965 IDE controller (rev. 0x01)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel using event channel 3 for irq 14
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel using event channel 4 for irq 15
atabus1 at siside0 channel 1
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB
host controller (rev. 0x0f)
ioapic0: int20
1a9a8<vector=a8,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
ohci0: interrupting at ioapic0 pin 20, event channel 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB
host controller (rev. 0x0f)
ioapic0: int21
1a9b0<vector=b0,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
ohci1: interrupting at ioapic0 pin 21, event channel 6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598 USB
host controller (rev. 0x0f)
ioapic0: int22
1a9b8<vector=b8,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
ohci2: interrupting at ioapic0 pin 22, event channel 7
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0
host controller (rev. 0x00)
ioapic0: int23
1a9c0<vector=c0,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
ehci0: interrupting at ioapic0 pin 23, event channel 8
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Silicon Integrated System EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
siside1 at pci0 dev 5 function 0
siside1: Silicon Integrated Systems 180/96X SATA controller (rev. 0x01)
siside1: bus-master DMA support present
siside1: primary channel configured to native-PCI mode
ioapic0: int17
1a9c8<vector=c8,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
siside1: using ioapic0 pin 17, event channel 9 for native-PCI interrupt
atabus2 at siside1 channel 0
siside1: secondary channel configured to native-PCI mode
atabus3 at siside1 channel 1
ppb1 at pci0 dev 6 function 0: Silicon Integrated System product 0x000a (rev. 0x00)
pci2 at ppb1 bus 2ppb1: added to list as bus 2
pci2: i/o space, memory space enabled
re0 at pci0 dev 9 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
ioapic0: int19
1a9d0<vector=d0,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
re0: interrupting at ioapic0 pin 19, event channel 10
re0: Ethernet address 00:30:05:b9:3d:8f
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
esiop0 at pci0 dev 10 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ioapic0 pin 17, event channel 9
esiop0: alloc new tag DSA table at PHY addr 0x3cced000
scsibus0 at esiop0: 16 targets, 8 luns per target
eap0 at pci0 dev 12 function 0: Ensoniq CT5880 CT5880-C (rev. 0x02)
ioapic0: int16
1a9d8<vector=d8,delmode=1,logical,actlo,level,masked,dest=0> 1000000<target=1>
eap0: interrupting at ioapic0 pin 16, event channel 11
eap0: ac97: TriTech TR28602 codec; no 3D stereo
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
ppb2 at pci0 dev 31 function 0: Silicon Integrated System product 0x0004 (rev. 0x00)
pci3 at ppb2 bus 3ppb2: added to list as bus 3
pci3: i/o space, memory space enabled
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Xen clock: using event channel 15
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
raidattach: Asked for 8 units
Kernelized RAIDframe activated
xenbus0: using event channel 16
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <SAMSUNG SP0822N>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76351 MB, 155127 cyl, 16 head, 63 sec, 512 bytes/sect x 156368016 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
esiop0: alloc newcdb at PHY addr 0x3cd4e000
Searching for RAID components...
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
xvif1.0: Ethernet address 00:16:3e:4e:aa:e4
xbd backend: attach device wd0g (size 43008000) for domain 1
xbd backend: attach device vnd0d (size 1228800) for domain 1
xbd backend 0x0 for domain 1 using event channel 21
xbd backend 0x1 for domain 1 using event channel 22
pms0: resetting mouse interface
ehci0: handing over full speed device on port 8 to ohci2
uhub3: port 8, device disappeared after reset
ulpt0 at uhub1 port 3 configuration 1 interface 0
ulpt0: Kyocera Mita Kyocera Mita FS-1010, rev 1.01/0.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
------
This is not only an issue with CUPS, it happens with lpr too. And also
with smaller files, doing:
# lpr file.ps
Panic 1:
kernel: supervisor trap page fault, code=0
Stopped at 0xc062360d: movl %edx,0(%eax)
Screenshot with backtrace:
http://www.markweinem.de/bt1.jpg
Panic 2:
ulpt0: offline 0x3cd527d0
panic: ohci_softintr: addr 0x3cd527d0
Stopped at 0xc04dd9a4: popl not found %ebp
Screenshot with backtrace:
http://www.markweinem.de/bt2.jpg