The following reply was made to PR kern/35011; it has been noted by GNATS.

From: Emiliano Gavilan <egavilan@eie.fceia.unr.edu.ar>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: kern/35011 (Booting with GENERIC-MPACPI makes vr(4) not work)
Date: Fri, 15 Jun 2007 20:18:19 -0300

 On Thu, 14 Jun 2007 09:01:58 +0000 (UTC)
 xtraeme@netbsd.org wrote:
 
 > Synopsis: Booting with GENERIC-MPACPI makes vr(4) not work
 > 
 > State-Changed-From-To: open->feedback
 > State-Changed-By: xtraeme@netbsd.org
 > State-Changed-When: Thu, 14 Jun 2007 09:01:53 +0000
 > State-Changed-Why:
 > Can you please try with a more recent snapshot? thanks.
 
 NetBSD 4.0_BETA2 (GENERIC), snapshot of 20070613, everything works now.
 
 attached dmesg: 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.0_BETA2 (GENERIC) #0: Wed Jun 13 16:56:15 PDT 2007
 	builds@wb34:/home/builds/ab/netbsd-4/i386/200706130002Z-obj/home/builds/ab/netbsd-4/src/sys/arch/i386/compile/GENERIC
 total memory = 479 MB
 rbus: rbus_min_start set to 0x40000000
 avail memory = 460 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 BIOS32 rev. 0 found at 0xfbce0
 mainbus0 (root)
 cpu0 at mainbus0: apid 0 (boot processor)
 cpu0: AMD Athlon XP 2000+ (686-class), 1666.49 MHz, id 0x681
 cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
 cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
 cpu0: "AMD Athlon(tm) XP 2000+"
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 256 KB 64B/line 16-way
 cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
 cpu0: AMD Power Management features: 1<TS>
 cpu0: calibrating local timer
 cpu0: apic clock running at 266 MHz
 cpu0: 8 page colors
 ioapic0 at mainbus0 apid 2 (I/O APIC)
 ioapic0: pa 0xfec00000, version 3, 24 pins
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20060217
 acpi0: X/RSDT: OemId <VT8375,AWRDACPI,42302e31>, AslId <AWRD,00000000>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 mpacpi: could not get bus number, assuming bus 0
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
 acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
 PNP0C01 [System Board] at acpi0 not configured
 PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0000 [AT Interrupt Controller] at acpi0 not configured
 PNP0200 [AT DMA Controller] at acpi0 not configured
 attimer1 at acpi0 (PNP0100): AT Timer
 attimer1: io 0x40-0x43 irq 0
 PNP0B00 [AT Real-Time Clock] at acpi0 not configured
 pcppi1 at acpi0 (PNP0800)
 pcppi1: io 0x61
 pcppi1: children must have an explicit unit
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 npx1 at acpi0 (PNP0C04)
 npx1: io 0xf0-0xff irq 13
 npx1: reported by CPUID; using exception 16
 PNP0700 [PC standard floppy disk controller] at acpi0 not configured
 com3 at acpi0 (PNP0501-1)
 com3: io 0x3f8-0x3ff irq 4
 com3: ns16550a, working fifo
 com4 at acpi0 (PNP0501-2)
 com4: io 0x2f8-0x2ff irq 3
 com4: ns16550a, working fifo
 lpt3 at acpi0 (PNP0400)
 lpt3: io 0x378-0x37f,0x778-0x77b irq 7
 pckbc1 at acpi0 (PNP0F13): aux port
 pckbc1: irq 12
 pckbc2 at acpi0 (PNP0303): kbd port
 pckbc2: io 0x60,0x64 irq 1
 PNP0C0B [ACPI Fan] at acpi0 not configured
 acpitz0 at acpi0: ACPI Thermal Zone
 acpitz0: unable to get polling interval; using default of 30.0s
 acpitz0: active cooling level 0: 63.0C
 acpitz0: critical 70.0C passive 46.5C
 pcppi1: attached to attimer1
 pckbd0 at pckbc2 (kbd slot)
 pckbc2: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc2 (aux slot)
 pckbc2: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: VIA Technologies product 0x3116 (rev. 0x00)
 agp0 at pchb0: aperture at 0xe8000000, size 0x10000000
 ppb0 at pci0 dev 1 function 0: VIA Technologies VT8633 (Apollo Pro 266) CPU-AGP Bridge (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga1 at pci1 dev 0 function 0: S3 product 0x8d04 (rev. 0x00)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 uhci0 at pci0 dev 6 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x61)
 uhci0: interrupting at ioapic0 pin 17 (irq 11)
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1 at pci0 dev 6 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x61)
 uhci1: interrupting at ioapic0 pin 18 (irq 10)
 usb1 at uhci1: USB revision 1.0
 uhub1 at usb1
 uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 ehci0 at pci0 dev 6 function 2: VIA Technologies VT8237 EHCI USB Controller (rev. 0x63)
 ehci0: interrupting at ioapic0 pin 19 (irq 5)
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1
 usb2 at ehci0: USB revision 2.0
 uhub2 at usb2
 uhub2: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 4 ports with 4 removable, self powered
 uhci2 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x80)
 ALKB: Picked IRQ 21 with weight 0
 uhci2: interrupting at ioapic0 pin 21 (irq 11)
 usb3 at uhci2: USB revision 1.0
 uhub3 at usb3
 uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhci3 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x80)
 uhci3: interrupting at ioapic0 pin 21 (irq 11)
 usb4 at uhci3: USB revision 1.0
 uhub4 at usb4
 uhub4: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 uhci4 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x80)
 uhci4: interrupting at ioapic0 pin 21 (irq 10)
 usb5 at uhci4: USB revision 1.0
 uhub5 at usb5
 uhub5: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5: 2 ports with 2 removable, self powered
 ehci1 at pci0 dev 16 function 3: VIA Technologies VT8237 EHCI USB Controller (rev. 0x82)
 ehci1: interrupting at ioapic0 pin 21 (irq 5)
 ehci1: BIOS has given up ownership
 ehci1: EHCI version 1.0
 ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
 usb6 at ehci1: USB revision 2.0
 uhub6 at usb6
 uhub6: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub6: 6 ports with 6 removable, self powered
 pcib0 at pci0 dev 17 function 0
 pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
 viaide0 at pci0 dev 17 function 1
 viaide0: VIA Technologies VT8235 ATA133 controller
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to compatibility mode
 viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus0 at viaide0 channel 0
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus1 at viaide0 channel 1
 auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50)
 ALKC: Picked IRQ 22 with weight 0
 auvia0: interrupting at ioapic0 pin 22 (irq 10)
 auvia0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
 auvia0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
 audio0 at auvia0: full duplex, mmap, independent
 vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
 ALKD: Picked IRQ 23 with weight 0
 vr0: interrupting at ioapic0 pin 23 (irq 11)
 vr0: Ethernet address: 00:0c:76:56:ee:95
 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x0002c6, model 0x0032, rev. 8
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 isa0 at pcib0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 isapnp0: no ISA Plug 'n Play devices found
 ioapic0: enabling
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 Kernelized RAIDframe activated
 atapibus0 at atabus0: 2 targets
 cd0 at atapibus0 drive 1: <SAMSUNG CD-ROM  SH-152A, , C502> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 wd0 at atabus0 drive 0: <Maxtor 2F040L0>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 atapibus1 at atabus1: 2 targets
 cd1 at atapibus1 drive 1: <HL-DT-ST GCE-8526B, , 1.03> cdrom removable
 cd1: 32-bit data port
 cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 wsdisplay0: screen 5 added (80x25, vt100 emulation)
 wsdisplay0: screen 6 added (80x25, vt100 emulation)
 wsdisplay0: screen 7 added (80x25, vt100 emulation)