Subject: Re: kern/35545: NetBSD-current will not boot with AHCI and Lite-On
To: None <kern-bug-people@netbsd.org, gnats-admin@netbsd.org,>
From: Hisashi T Fujinaka <htodd@twofifty.com>
List: netbsd-bugs
Date: 02/08/2007 08:05:02
The following reply was made to PR kern/35545; it has been noted by GNATS.

From: Hisashi T Fujinaka <htodd@twofifty.com>
To: gnats-bugs@NetBSD.org
Cc: kern-bug-people@NetBSD.org, gnats-admin@NetBSD.org,
	netbsd-bugs@NetBSD.org
Subject: Re: kern/35545: NetBSD-current will not boot with AHCI and Lite-On
 SATA CD
Date: Thu, 8 Feb 2007 00:03:56 -0800 (PST)

 I can't get the serial console to respond to any keystrokes, either.
 Perhaps my null modem cable isn't a null modem cable.
 
 The output is attached to where the system hangs:
 
 
 >> NetBSD/i386 BIOS Boot, Revision 3.3
 >> (htodd@kerry.i8u.org, Sat Jan 27 14:36:51 PST 2007)
 >> Memory: 635/2095744 k
 Press return to boot now, any other key for boot menu
 booting hd1a:netbsd - starting in 0
 3686564+82468+206100 [222528+219324]=0x4388b0
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
      2006, 2007
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.9 (ERIKA) #7: Wed Feb  7 23:52:21 PST 2007
          htodd@erika.i8u.org:/var/obj/sys/arch/i386/compile.i386/ERIKA
 total memory = 2047 MB
 avail memory = 2007 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 BIOS32 rev. 0 found at 0xf0010
 mainbus0 (root)
 mainbus0: Intel MP Specification (Version 1.4) (P5B                  )
 cpu0 at mainbus0: apid 0 (boot processor)
 cpu0: Intel Core 2 (Merom) (686-class), 2402.01 MHz, id 0x6f6
 cpu0: "Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz"
 cpu0: using thermal monitor 1
 cpu0: Enhanced SpeedStep (1340 mV) 2400 MHz
 cpu0: unknown Enhanced SpeedStep CPU.
 cpu0: calibrating local timer
 cpu0: apic clock running at 266 MHz
 cpu1 at mainbus0: apid 1 (application processor)
 cpu1: starting
 cpu1: Intel Core 2 (Merom) (686-class), 2401.92 MHz, id 0x6f6
 cpu1: "Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz"
 cpu1: using thermal monitor 1
 cpu1: Enhanced SpeedStep (1340 mV) 2400 MHz
 cpu1: unknown Enhanced SpeedStep CPU.
 mpbios: bus 0 is type PCI
 mpbios: bus 1 is type PCI
 mpbios: bus 2 is type PCI
 mpbios: bus 3 is type PCI
 mpbios: bus 4 is type PCI
 mpbios: bus 5 is type PCI
 mpbios: bus 6 is type ISA
 ioapic0 at mainbus0 apid 2 (I/O APIC)
 ioapic0: pa 0xfec00000, version 20, 24 pins
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Intel product 0x29a0 (rev. 0x02)
 ppb0 at pci0 dev 1 function 0: Intel product 0x29a1 (rev. 0x02)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 vga0 at pci1 dev 0 function 0: NVIDIA product 0x0295 (rev. 0xa1)
 vga0: WARNING: ignoring 64-bit BAR @ 0x14
 vga0: WARNING: ignoring 64-bit BAR @ 0x1c
 wsdisplay0 at vga0 kbdmux 1
 wsmux1: connecting to wsdisplay0
 uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
 uhci0: interrupting at ioapic0 pin 16 (irq 11)
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
 uhci1: interrupting at ioapic0 pin 17 (irq 5)
 usb1 at uhci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
 ehci0: interrupting at ioapic0 pin 18 (irq 15)
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1
 usb2 at ehci0: USB revision 2.0
 uhub2 at usb2
 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 4 ports with 4 removable, self powered
 azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
 azalia0: interrupting at ioapic0 pin 22 (irq 3)
 azalia0: host: Intel 82801H High Definition Audio Controller (rev. 2)
 azalia0: host: High Definition Audio rev. 1.0
 ppb1 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x02)
 pci2 at ppb1 bus 4
 pci2: memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x02)
 pci3 at ppb2 bus 3
 pci3: memory space enabled, rd/line, wr/inv ok
 unknown vendor 0x1969 product 0x1048 (ethernet network, revision 0xb0) at pci3 d
 ev 0 function 0 not configured
 ppb3 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x02)
 pci4 at ppb3 bus 2
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 ahcisata0 at pci4 dev 0 function 0: unknown vendor 0x197b product 0x2363
 ahcisata0: AHCI revision 1.0, 2 ports, 32 command slots, features 0xc722e000
 ahcisata0: interrupting at ioapic0 pin 16 (irq 11)
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 pciide0 at pci4 dev 0 function 1
 pciide0: unknown vendor 0x197b product 0x2363 (rev. 0x02)
 pciide0: bus-master DMA support present, but unused (no driver support)
 pciide0: primary channel wired to native-PCI mode
 pciide0: using ioapic0 pin 17 (irq 0) for native-PCI interrupt
 atabus2 at pciide0 channel 0
 pciide0: secondary channel wired to native-PCI mode
 atabus3 at pciide0 channel 1
 uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
 uhci2: interrupting at ioapic0 pin 23 (irq 14)
 usb3 at uhci2: USB revision 1.0
 uhub3 at usb3
 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
 uhci3: interrupting at ioapic0 pin 19 (irq 10)
 usb4 at uhci3: USB revision 1.0
 uhub4 at usb4
 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x02)
 uhci4: interrupting at ioapic0 pin 18 (irq 15)
 usb5 at uhci4: USB revision 1.0
 uhub5 at usb5
 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5: 2 ports with 2 removable, self powered
 ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
 ehci1: interrupting at ioapic0 pin 23 (irq 14)
 ehci1: BIOS refuses to give up ownership, using force
 ehci1: EHCI version 1.0
 ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
 usb6 at ehci1: USB revision 2.0
 uhub6 at usb6
 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub6: 6 ports with 6 removable, self powered
 ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xf2)
 pci5 at ppb4 bus 5
 pci5: i/o space, memory space enabled
 wm0 at pci5 dev 2 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 0
 wm0: interrupting at ioapic0 pin 23 (irq 14)
 wm0: Ethernet address 00:e0:0c:01:f4:68
 igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX
 , auto
 fwohci0 at pci5 dev 3 function 0: VIA Technologies VT6306 IEEE 1394 Host Control
 ler (rev. 0x80)
 fwohci0: interrupting at ioapic0 pin 21 (irq 11)
 fwohci0: OHCI version 1.0 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:11:d8:00:00:e8:39:db
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip at ieee1394if0 not configured
 fwohci0: Initiate bus reset
 pcib0 at pci0 dev 31 function 0
 pcib0: Intel 82801H LPC Interface Bridge (rev. 0x02)
 ahcisata1 at pci0 dev 31 function 2: Intel 82801H AHCI SATA Controller with 6 po
 rts
 ahcisata1: AHCI revision 1.1, 6 ports, 32 command slots, features 0xff22e0c0
 ahcisata1: interrupting at ioapic0 pin 19 (irq 10)
 atabus4 at ahcisata1 channel 0
 atabus5 at ahcisata1 channel 1
 atabus6 at ahcisata1 channel 2
 atabus7 at ahcisata1 channel 3
 atabus8 at ahcisata1 channel 4
 atabus9 at ahcisata1 channel 5
 Intel 82801H SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 f
 unction 3 not configured
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com0: console
 pckbc0 at isa0 port 0x60-0x64
 attimer0 at isa0 port 0x40-0x43: AT Timer
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 pcppi0: attached to attimer0
 isapnp0: no ISA Plug 'n Play devices found
 ioapic0: enabling
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 ieee1394if0: bus manager 0 (me)
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 azalia0: codec[0]: 0x11d4/0x1988 (rev. 4.0)
 azalia0: codec[0]: High Definition Audio rev. 1.0
 azalia0: playback: max channels=8, encodings=1<PCM>
 azalia0: playback: PCM formats=e07ff<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.
 2kHz,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
 azalia0: recording: max channels=2, DIGITAL, encodings=5<AC3,PCM>
 azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88
 .2kHz,48kHz,44.1kHz>
 audio0 at azalia0: full duplex, independent
 
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 Kernelized RAIDframe activated
 ahcisata1 port 0: device present, speed: 1.5Gb/s
 ahcisata1 port 1: device present, speed: 3.0Gb/s
 ahcisata1 port 5: device present, speed: 1.5Gb/s
 wd0 at atabus4 drive 0: <ST3250620AS>
 wd0: quirks 2<FORCE_LBA48>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd1 at atabus5 drive 0: <WDC WD2500KS-00MJB0>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1(ahcisata1:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 uvm_fault(0xc04c7720, 0, 1) -> 0xe
 kernel: supervisor trap page fault, code=0
 Stopped in pid 21.1 (atabus9) at        0:      invalid address
 db{0}>
 
 -- 
 Hisashi T Fujinaka - htodd@twofifty.com
 BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte