The following reply was made to PR kern/34289; it has been noted by GNATS.

From: "=?ISO-8859-1?Q?St=E9phane_Witzmann?=" <stephane.witzmann@gmail.com>
To: gnats-bugs@netbsd.org
Cc: 
Subject: Re: kern/34289: Some missing PCI devices in pcidevs
Date: Mon, 11 Sep 2006 18:47:17 +0200

 Fixed in -current. Full dmesg follows.
 
 -----------------------------------------------------------------------
 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.1 (GENERIC_ACPI) #0: Sat Sep  9 15:11:49 UTC 2006
         builds@b1.netbsd.org:/home/builds/ab/HEAD/amd64/200609090000Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC_ACPI
 total memory = 894 MB
 avail memory = 850 MB
 sysctl_createv: sysctl_create(security) returned 17
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
 mainbus0 (root)
 cpu0 at mainbus0: apid 0 (boot processor)
 cpu0: AMD Turion(tm) 64 X2 Mobile Technology TL-50, 1596.08 MHz
 cpu0: features: ffdbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features: ffdbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
 cpu0: features: ffdbfbff<FXSR,SSE,SSE2,B27,HTT,LONG,3DNOW2,3DNOW>
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 256 KB 64B/line 16-way
 cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: AMD Power Management features: TS FID VID TTP TM STC
 cpu0: AMD PowerNow! Technology 1600 MHz
 cpu0: available frequencies (Mhz): 800 1600
 cpu0: calibrating local timer
 cpu0: apic clock running at 199 MHz
 cpu0: 8 page colors
 cpu1 at mainbus0: apid 1 (application processor)
 cpu1: not started
 ioapic0 at mainbus0 apid 2 (I/O APIC)
 ioapic0: pa 0xfec00000, version 21, 24 pins
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20060217
 acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 timecounter: selected timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 32-bit timer
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 PNP0C0D [ACPI lid device] at acpi0 not configured
 PNP0C0C [ACPI power button device] at acpi0 not configured
 PNP0C0E [ACPI sleep button device] at acpi0 not configured
 ACPI0003 [AC Device] at acpi0 not configured
 PNP0C0A [ACPI Control Method Battery] at acpi0 not configured
 PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0C09 [ACPI Embedded Controller] at acpi0 not configured
 PNP0200 [AT DMA Controller] at acpi0 not configured
 PNP0C04 [Math Coprocessor] at acpi0 not configured
 PNP0000 [AT Interrupt Controller] at acpi0 not configured
 PNP0B00 [AT Real-Time Clock] at acpi0 not configured
 PNP0800 [AT-style speaker sound] at acpi0 not configured
 PNP0100 [AT Timer] at acpi0 not configured
 PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
 PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0C01 [System Board] at acpi0 not configured
 ACPI Object Type 'Thermal' (0x0d) at acpi0 not configured
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: ATI Technologies RS480 Host Bridge (rev. 0x10)
 ppb0 at pci0 dev 1 function 0: ATI Technologies RS480 PCI Express
 Bridge (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 5 function 0: ATI Technologies Radeon Xpress Series
 (RS482M) (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 ppb1 at pci0 dev 4 function 0: ATI Technologies RS480 PCI Express
 Bridge (rev. 0x00)
 pci2 at ppb1 bus 2
 pci2: no spaces enabled!
 ixpide0 at pci0 dev 18 function 0
 ixpide0: ATI Technologies IXP IDE Controller (rev. 0x80)
 ixpide0: bus-master DMA support present
 ixpide0: primary channel configured to native-PCI mode
 ixpide0: using ioapic0 pin 22 (irq 11) for native-PCI interrupt
 atabus0 at ixpide0 channel 0
 ixpide0: secondary channel configured to native-PCI mode
 atabus1 at ixpide0 channel 1
 ohci0 at pci0 dev 19 function 0: ATI Technologies SB400 USB Host
 Controller (rev. 0x80)
 ohci0: interrupting at ioapic0 pin 19 (irq 10)
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 ohci1 at pci0 dev 19 function 1: ATI Technologies SB400 USB Host
 Controller (rev. 0x80)
 ohci1: interrupting at ioapic0 pin 19 (irq 10)
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 4 ports with 4 removable, self powered
 ehci0 at pci0 dev 19 function 2: ATI Technologies SB400 USB2 Host
 Controller (rev. 0x80)
 ehci0: interrupting at ioapic0 pin 19 (irq 10)
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 4 ports each: ohci0 ohci1
 usb2 at ehci0: USB revision 2.0
 uhub2 at usb2
 uhub2: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 8 ports with 8 removable, self powered
 ATI Technologies SB400 SMBus Controller (SMBus serial bus, revision
 0x83) at pci0 dev 20 function 0 not configured
 ixpide1 at pci0 dev 20 function 1
 ixpide1: ATI Technologies IXP IDE Controller (rev. 0x80)
 ixpide1: bus-master DMA support present
 ixpide1: primary channel configured to compatibility mode
 ixpide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus2 at ixpide1 channel 0
 ixpide1: secondary channel wired to compatibility mode
 ixpide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus3 at ixpide1 channel 1
 azalia0 at pci0 dev 20 function 2: Generic High Definition Audio Controller
 azalia0: interrupting at ioapic0 pin 16 (irq 11)
 azalia0: host: 0x1002/0x437b (rev. 1)
 azalia0: host: High Definition Audio rev. 1.0
 pcib0 at pci0 dev 20 function 3
 pcib0: ATI Technologies SB400 PCI-ISA Bridge (rev. 0x80)
 ppb2 at pci0 dev 20 function 4: ATI Technologies SB400 PCI-PCI Bridge
 (rev. 0x80)
 pci3 at ppb2 bus 5
 pci3: i/o space, memory space enabled
 Broadcom BCM4318 AirForce One 54g (miscellaneous network, revision
 0x02) at pci3 dev 3 function 0 not configured
 fwohci0 at pci3 dev 4 function 0: O2 Micro Integrated OHCI IEEE 1394
 Host Controller (rev. 0x02)
 fwohci0: can't map OHCI register space
 O2 Micro Integrated MMC/SD Controller (SD Host Controller system,
 revision 0x01) at pci3 dev 4 function 2 not configured
 O2 Micro Integrated MS/xD/SM Controller (miscellaneous mass storage,
 revision 0x01) at pci3 dev 4 function 3 not configured
 rtk0 at pci3 dev 5 function 0: Realtek 8139 10/100BaseTX
 rtk0: interrupting at ioapic0 pin 21 (irq 11)
 rtk0: Ethernet address 00:03:0d:46:df:74
 rlphy0 at rtk0 phy 7: Realtek internal PHY
 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 pchb1 at pci0 dev 24 function 0
 pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
 pchb2 at pci0 dev 24 function 1
 pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
 pchb3 at pci0 dev 24 function 2
 pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
 pchb4 at pci0 dev 24 function 3
 pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
 isa0 at pcib0
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 attimer0 at isa0 port 0x40-0x43: AT Timer
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi0
 pcppi0: attached to attimer0
 ioapic0: enabling
 timecounter: Timecounter "TSC" frequency 1596094580 Hz quality 800
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 azalia0: codec[0]: 0x1057/0x3055 (rev. 7.0)
 azalia0: codec[0]: High Definition Audio rev. 1.0
 azalia0: codec[0]: No support for modem function groups
 azalia0: codec[0] has no audio function groups
 azalia0: codec[1]: 0x10ec/0x0861 (rev. 3.0)
 azalia0: codec[1]: High Definition Audio rev. 1.0
 azalia0: playback: max channels=2, encodings=1<PCM>
 azalia0: playback: PCM formats=e0140<24bit,20bit,16bit,96kHz,48kHz>
 azalia0: recording: max channels=2, encodings=1<PCM>
 azalia0: recording: PCM formats=20140<16bit,96kHz,48kHz>
 azalia0: RIRB time out
 audio0 at azalia0: full duplex, independent
 Kernelized RAIDframe activated
 wd0 at atabus0 drive 0: <FUJITSU MHV2100BH>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 atapibus0 at atabus2: 2 targets
 cd0 at atapibus0 drive 0: <PHILIPS DVD+/-RW SDVD8820, , AJ10> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 uhidev0 at uhub1 port 4 configuration 1 interface 0
 uhidev0: Microsoft Microsoft Trackball OpticalM-BM-., rev 1.10/1.21,
 addr 2, iclass 3/1
 ums0 at uhidev0: 5 buttons and Z dir.
 wsmouse1 at ums0 mux 0