>Number:         34239
>Category:       port-i386
>Synopsis:       ACPI kernel fails to boot on Shuttle SN45
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Aug 20 00:05:00 +0000 2006
>Originator:     abs@absd.org
>Release:        NetBSD 4.0_BETA
>Organization:
	
>Environment:
	
	
System: NetBSD iris.absd.org 4.0_BETA NetBSD 4.0_BETA (_ACPI_) #12: Sat Aug 19 19:45:11 BST 2006 root@tll.i:/var/obj/i386/files/netbsd/4/sys/arch/i386/compile/_ACPI_ i386
Architecture: i386
Machine: i386
>Description:

	Boot hangs after displaying:
ohci0 at pci0 dev 2 function 0: NVIDIA nForce2 USB Host Controller (rev. 0xa4)

>How-To-Repeat:

	Boot kernel with ACPI enabled on Shuttle SN45

>Fix:
	Avoid ACPI

	dmesg from GENERIC kernel boot:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_BETA (GENERIC) #2: Sat Aug 19 20:51:36 BST 2006
	root@tll.i:/var/obj/i386/files/netbsd/4/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 996 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfb760
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 2000+ (686-class), 1670.56 MHz, id 0x681
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: "AMD Athlon(tm) XP 2000+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: NVIDIA nForce2 Host-PCI Bridge (rev. 0xc1)
agp at pchb0 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 1 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 2 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 3 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 4 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA nForce2 PCI-ISA bridge (rev. 0xa4)
NVIDIA nForce2 SMBus Controller (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: NVIDIA nForce2 USB Host Controller (rev. 0xa4)
ohci0: interrupting at irq 4
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1: NVIDIA nForce2 USB Host Controller (rev. 0xa4)
ohci1: interrupting at irq 3
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2: NVIDIA nForce2 USB2 Host Controller (rev. 0xa4)
ehci0: interrupting at irq 7
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nfe0 at pci0 dev 4 function 0: irq 11, address 00:30:1b:b1:05:25
rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
NVIDIA nForce2 MCP-T Audio Processing Unit (audio multimedia, revision 0xa2) at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio
auich0: interrupting at irq 5
auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
auich0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
ppb0 at pci0 dev 8 function 0: NVIDIA nForce2 PCI-PCI bridge (rev. 0xa3)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
viaide0 at pci0 dev 9 function 0
viaide0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
ppb1 at pci0 dev 30 function 0: NVIDIA nForce2 PCI-PCI Bridge (rev. 0xc1)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled
vga1 at pci2 dev 0 function 0: ATI Technologies Radeon 9800PRO NH (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ATI Technologies Radeon 9800 Pro Secondary (miscellaneous display) at pci2 dev 0 function 1 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
uhub3 at uhub0 port 1
uhub3: Lite-On Tech USB 1.1 2 port downstream low-power hub, class 9/0, rev 1.10/1.26, addr 2
uhub3: 4 ports with 2 removable, bus powered
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: vendor 0x1130 Tenx Nonstandard Devic, rev 1.10/1.00, addr 2, iclass 3/0
uhid0 at uhidev0: input=0, output=64, feature=8
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: vendor 0x1130 Tenx Nonstandard Devic, rev 1.10/1.00, addr 2, iclass 3/0
uhid1 at uhidev1: input=0, output=8, feature=0
wd0 at atabus0 drive 0: <Maxtor 6K040L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhidev2 at uhub3 port 3 configuration 1 interface 0
uhidev2: Lite-On Tech IBM USB Travel Keyboard with UltraNav, rev 1.10/1.16, addr 3, iclass 3/1
ukbd0 at uhidev2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub3 port 3 configuration 1 interface 1
uhidev3: Lite-On Tech IBM USB Travel Keyboard with UltraNav, rev 1.10/1.16, addr 3, iclass 3/0
uhidev3: 3 report ids
uhid2 at uhidev3 reportid 2: input=1, output=0, feature=0
uhid3 at uhidev3 reportid 3: input=3, output=0, feature=0
uhidev4 at uhub3 port 4 configuration 1 interface 0
uhidev4: Synaptics Inc. Composite TouchPad / TrackPoint, rev 1.10/0.15, addr 4, iclass 3/1
ums0 at uhidev4: 3 buttons
wsmouse0 at ums0 mux 0
uhidev5 at uhub3 port 4 configuration 1 interface 1
uhidev5: Synaptics Inc. Composite TouchPad / TrackPoint, rev 1.10/0.15, addr 4, iclass 3/1
ums1 at uhidev5: 3 buttons
wsmouse1 at ums1 mux 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <YAMAHA  CRW2200E, , 1.0D> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

>Unformatted: