The following reply was made to PR kern/30284; it has been noted by GNATS.

From: "Ja'far Railton" <ibn.richard@gmail.com>
To: gnats-bugs@netbsd.org
Cc: 
Subject: Re: kern/30284
Date: Sat, 29 Apr 2006 04:39:03 +0000

 --ZPt4rx8FFjLCG7dd
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 
 I attach the dmesg after the above modifications.
 
 
 
 
 --ZPt4rx8FFjLCG7dd
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename=dbug
 
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 3.99.18 (SAFAR-PCMCIA) #0: Fri Apr 28 19:18:29 UTC 2006
 	jr0@think.makhraj.net:/usr/obj/sys/arch/i386/compile/SAFAR-PCMCIA
 total memory = 247 MB
 avail memory = 236 MB
 BIOS32 rev. 0 found at 0xf0210
 PCI BIOS rev. 2.1 found at 0xf0200
 pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
 PCI IRQ Routing Table rev. 1.0 found at 0xfb9d0, size 192 bytes (10 entries)
 PCI Interrupt Router at 000:07:0 (Acer Labs M1543 PCI-ISA Bridge compatible)
 ------------------------------------------
   device vendor product pin PIRQ IRQ stage
 ------------------------------------------
 000:06:0 0x10b9 0x5451   A  0x07  11  0    already assigned
 000:10:0 0x8086 0x1229   A  0x01  11  0    already assigned
 000:19:0 0x1217 0x6972   A  0x03  11  0    already assigned
 ------------------------------------------
 mainbus0 (root)
 pci_addr_fixup: 000:19:0 0x1217 0x6972 new address 0x0f800000
 cpu0 at mainbus0: (uniprocessor)
 cpu0: Intel Pentium III (686-class), 697.49 MHz, id 0x68a
 cpu0: features 387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
 cpu0: features 387f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
 cpu0: features 387f9ff<FXSR,SSE>
 cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
 cpu0: L2 cache 256 KB 32B/line 8-way
 cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
 cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
 cpu0: serial number 0000-068a-0003-e1a6-4891-6365
 cpu0: 8 page colors
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Acer Labs product 0x1621 (rev. 0x01)
 agp at pchb0 not configured
 ppb0 at pci0 dev 1 function 0: Acer Labs product 0x5247 (rev. 0x01)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga1 at pci1 dev 0 function 0: Trident Microsystems product 0x8620 (rev. 0x5d)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 autri0 at pci0 dev 6 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x01)
 autri0: interrupting at irq 11
 autri0: ac97: Avance Logic ALC200/ALC201 codec; headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
 audio0 at autri0: full duplex, mmap, independent
 midi0 at autri0: 4DWAVE MIDI UART
 pcib0 at pci0 dev 7 function 0
 pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
 fxp0 at pci0 dev 10 function 0: i82550 Ethernet, rev 13
 fxp0: interrupting at irq 11
 fxp0: Ethernet address 00:00:e2:56:c1:da
 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 aceride0 at pci0 dev 16 function 0
 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
 aceride0: bus-master DMA support present
 aceride0: primary channel configured to compatibility mode
 aceride0: primary channel interrupting at irq 14
 atabus0 at aceride0 channel 0
 aceride0: secondary channel configured to compatibility mode
 aceride0: secondary channel interrupting at irq 15
 atabus1 at aceride0 channel 1
 Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 17 function 0 not configured
 cbb0 at pci0 dev 19 function 0: O2 Micro OZ6912/OZ6972 PCI-CardBus Bridge (rev. 0x00)
 ohci0 at pci0 dev 20 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
 ohci0: interrupting at irq 10
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 isa0 at pcib0
 lpt2 at isa0 port 0x3bc-0x3bf irq : polled
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 attimer0 at isa0 port 0x40-0x43: AT Timer
 pcppi0 at isa0 port 0x61
 midi1 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff
 npx0: using exception 16
 pcppi0: attached to attimer0
 isapnp0: no ISA Plug 'n Play devices found
 cbb0: interrupting at irq 11
 cardslot0 at cbb0 slot 0 flags 0
 cardbus0 at cardslot0: bus 2
 pcmcia0 at cardslot0
 apm0 at mainbus0: Advanced Power Management BIOS
 apm0: Power Management spec V1.2
 Kernelized RAIDframe activated
 pcmcia0: ++enabled_count = 1
 cis mem map cacc2000
 pcmcia0: CIS tuple chain:
  01 02 00 ff
 CISTPL_DEVICE type=null speed=null
  15 2b 05 01 42 69 6c 6c 69 6f 6e 74 6f 6e 20 56
  39 32 20 46 61 78 20 4d 6f 64 65 6d 00 46 4d 35
  36 43 2d 42 46 53 00 35 2e 34 31 00 ff
 CISTPL_VERS_1
  20 04 4e 01 88 00
 CISTPL_MANFID
  21 02 02 01
 CISTPL_FUNCID
  1a 05 01 30 00 01 13
 CISTPL_CONFIG
  1b 13 e0 81 9d 5f 55 4d 5d 26 36 35 fc 14 aa 60
  f8 03 07 24 28
 CISTPL_CFTABLE_ENTRY
  1b 07 21 08 aa 60 f8 02 07
 CISTPL_CFTABLE_ENTRY
  1b 07 22 08 aa 60 e8 03 07
 CISTPL_CFTABLE_ENTRY
  1b 07 23 08 aa 60 e8 02 07
 CISTPL_CFTABLE_ENTRY
  1b 06 24 18 23 30 b8 1c
 CISTPL_CFTABLE_ENTRY
  1b 03 30 08 23
 CISTPL_CFTABLE_ENTRY
  ff
 CISTPL_END
 cis mem map cacc2000
 CISTPL_LINKTARGET expected, code 00 observed
 com3 at pcmcia0 function 0: <Billionton V92 Fax Modem, FM56C-BFS, 5.41>
 cfe->iomask = 10
 cfe->iospace[0].length = 8
 pcmcia_config_alloc: io 0 start=3f8 length=8 align=8 skew=0
 window iobase 43f8 iomax 43ff
 function iobase 43f8 iomax 43ff
 pcmcia0: ++enabled_count = 2
 pcmcia0: function 0 CCR at 0 offset 100: 60 8 ff 0, 3 20 ff 24, ff
 com3: ns16550a, working fifo
 pcmcia0: --enabled_count = 1
 pcmcia0: --enabled_count = 0
 wd0 at atabus0 drive 0: <FUJITSU MHT2040AS>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <CD-224E, , 2.7B> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 pcmcia0: ++enabled_count = 1
 pcmcia0: function 0 CCR at 0 offset 100: 60 8 ff 0, 3 20 ff 24, ff
 pcmcia0: --enabled_count = 0
 fxp0: link state changed to DOWN
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 pcmcia0: ++enabled_count = 1
 pcmcia0: function 0 CCR at 0 offset 100: 60 8 ff 0, 3 20 ff 24, ff
 pcmcia0: --enabled_count = 0
 
 --ZPt4rx8FFjLCG7dd--