>Number:         25386
>Category:       kern
>Synopsis:       cbb0: NOT USED because of unconfigured interrupt
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Apr 29 13:31:00 UTC 2004
>Closed-Date:
>Last-Modified:
>Originator:     Christian Hattemer
>Release:        1.6.2
>Organization:
>Environment:
NetBSD webster 1.6.2_STABLE NetBSD 1.6.2_STABLE (WEBSTER) #1: Wed Apr 28 18:20:03 CEST 2004     krille@webster:/usr/src/sys/arch/i386/compile/WEBSTER i386
>Description:
cbb does not work on this MSI MS-6232-P board. The issue might be simmilar to PR #10280.

I mainly enabled the driver to see if it would work, I don't have any cards to use. So there's no need to hurry a fix. ;-)

dmesg follows

NetBSD 1.6.2_STABLE (WEBSTER) #1: Wed Apr 28 18:20:03 CEST 2004
    krille@webster:/usr/src/sys/arch/i386/compile/WEBSTER
cpu0: Intel Pentium 4 (686-class), 2518.59 MHz
cpu0: D-cache 8 KB 64b/line 4-way
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,FGPAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,B31>
total memory = 479 MB
avail memory = 442 MB
using 6144 buffers containing 24652 KB of memory
BIOS32 rev. 0 found at 0xfdb10
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 651 Host Bridge (rev. 0x02)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Silicon Integrated System product 0x6325 (rev. 0x00)
pci_mem_find: void region
pci_mem_find: void region
pci_mem_find: void region
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x25)
pciide0 at pci0 dev 2 function 5: Silicon Integrated System 96X UDMA6651 IDE controller (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <WDC WD600BB-00CAA1>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4040B, K223AEA1241, A301> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: interrupting at irq 11
auich0: ALG32 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598 USB host controller (rev. 0x0f)
ohci1: interrupting at irq 12
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
Silicon Integrated System product 0x7002 (USB serial bus, interface 0x20) at pci0 dev 3 function 3 not configured
NEC product 0x00f2 (Firewire serial bus, interface 0x10, revision 0x01) at pci0 dev 12 function 0 not configured
cbb0 at pci0 dev 14 function 0: O2 Micro Inc product 0x6933 (rev. 0x01)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 14 function 1: O2 Micro Inc product 0x6933 (rev. 0x01)
cbb1: NOT USED because of unconfigured interrupt
rtk0 at pci0 dev 15 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:0c:76:85:37:34
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask ff65 netmask ff65 ttymask ffe7
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
uhidev0 at uhub0 port 3 configuration 1 interface 0
uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

>How-To-Repeat:
Look at dmesg
See that cbb does not work
>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: