Subject: port-i386/21925: auich doesn't play audio data
To: None <gnats-bugs@gnats.netbsd.org>
From: None <sengel@melshake.com>
List: netbsd-bugs
Date: 06/18/2003 10:09:53
>Number:         21925
>Category:       port-i386
>Synopsis:       auich doesn't play audio data
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jun 18 10:10:00 UTC 2003
>Closed-Date:
>Last-Modified:
>Originator:     Stephane Engel
>Release:        -current (as of a couple of days prior to UFS v2 integration)
>Organization:
>Environment:
NetBSD 1.6Q (MUSTANG) #33: Tue Jun 17 03:01:16 CEST 2003
	steph@mustang.macchiati.net:/usr/src/sys/arch/i386/compile/MUSTANG
>Description:
I have a problem with the auich driver on i386/-current
as of Apr 18th. Hardware is a Nec Versa VXi.
Symptoms are:
 * the sound card seem to be recognize.

Intel 82443MX AC-97 Audio Controller (audio multimedia) at ? dev 0 function 1 (tag 0x80000100, intrtag 0x80000100, intrswiz 0, intrpin 0x2, i/o on, mem off, no quirks): i82440MX AC-97 Audio
auich0: interrupting at irq 10
auich0: DMA bug workaround enabled
Yamaha YMF743-S codec; 18 bit DAC, no 3D stereo


 * don't play any sound, just a "spintzzz" on boot and some noise randomly (even when not playing anything).
    - tryed with cdplay, mplayer, cat /netbsd > /dev/audio
 * don't know if it's relative to PR/12695 ?

Notes: 
 - I tried with the last version (as 2 days) of ac97*.{c,h} and auich*.{c,h}. Same result.
 

- Steph

audioctl -a output:
name=440MX AC97
version=0x00
config=auich0
encodings=ulinear:8*,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=512
hiwat=128
lowat=96
monitor_gain=0
mode=
play.rate=8000
play.channels=1
play.precision=8
play.encoding=mulaw
play.gain=127
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=8000
record.channels=1
record.precision=8
record.encoding=mulaw
record.gain=191
record.balance=32
record.port=0x1
record.avail_ports=0x7
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0

mixerctl -av output:
outputs.master=127,127 volume delta=8
outputs.master.mute=off  [ off on ]
outputs.mono=255 volume delta=4
outputs.mono.mute=on  [ off on ]
outputs.mono.source=mixerout  [ mixerout mic ]
inputs.speaker=255 volume delta=16
inputs.speaker.mute=off  [ off on ]
inputs.phone=191 volume delta=8
inputs.phone.mute=on  [ off on ]
inputs.mic=191 volume delta=8
inputs.mic.mute=on  [ off on ]
inputs.mic.preamp=off  [ off on ]
inputs.mic.source=mic0  [ mic0 mic1 ]
inputs.line=191,191 volume delta=8
inputs.line.mute=off  [ off on ]
inputs.cd=191,191 volume delta=8
inputs.cd.mute=off  [ off on ]
inputs.video=191,191 volume delta=8
inputs.video.mute=off  [ off on ]
inputs.aux=191,191 volume delta=8
inputs.aux.mute=off  [ off on ]
inputs.dac=191,191 volume delta=8
inputs.dac.mute=off  [ off on ]
record.source=mic  [ mic cd video aux line mixerout mixeroutmono phone ]
record.volume=0,0 volume delta=16
record.volume.mute=off  [ off on ]




Full dmesg with DEBUG and VERBOSE options:
NetBSD 1.6Q (MUSTANG) #33: Tue Jun 17 03:01:16 CEST 2003
	steph@mustang.macchiati.net:/usr/src/sys/arch/i386/compile/MUSTANG
total memory = 255 MB
avail memory = 169 MB
using 6144 buffers containing 78480 KB of memory
BIOS32 rev. 0 found at 0xfdb50
PCI BIOS rev. 2.1 found at 0xfdb71
pcibios: config mechanism [1][x], special cycles [x][x], last bus 0
PCI IRQ Routing Table rev. 1.0 found at 0xf5ed0, size 128 bytes (6 entries)
PCI Interrupt Router at 000:07:0 (Intel 82371MX Mobile PCI I/O IDE Xcelerator (MPIIX))
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
000:00:1 0x8086 0x7195   B  0x01  10  0    already assigned
000:03:0 0x104c 0xac51   A  0x00   5  0    fixed up
000:03:1 0x104c 0xac51   B  0x01  10  0    fixed up
000:05:0 0x1002 0x4c52   A  0x02  10  0    already assigned
000:06:0 0x8086 0x1229   A  0x00   5  0    already assigned
000:07:2 0x8086 0x719a   D  0x03   9  0    already assigned
------------------------------------------
PCI fixup examining 8086:7194
PCI fixup examining 8086:7195
PCI fixup examining 104c:ac51
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 104c:ac51
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 1002:4c52
PCI fixup examining 8086:1229
PCI fixup examining 8086:7198
PCI fixup examining 8086:7199
PCI fixup examining 8086:719a
PCI fixup examining 8086:719b
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
  device vendor product
  register space address    size
--------------------------------------------
000:00:0 0x8086 0x7194 
		[OK]
000:00:1 0x8086 0x7195 
	10h port 0x0000e400 0x00000100
	14h port 0x0000ee80 0x00000040
		[OK]
000:03:0 0x104c 0xac51 
	10h mem  0x00000000 0x00001000
		[NG]
000:03:1 0x104c 0xac51 
	10h mem  0x00000000 0x00001000
		[NG]
000:05:0 0x1002 0x4c52 
	10h mem  0xfd000000 0x01000000
	14h port 0x0000e800 0x00000100
	18h mem  0xfebff000 0x00001000
		[OK]
000:06:0 0x8086 0x1229 
	10h mem  0xfebfe000 0x00001000
	14h port 0x0000ef00 0x00000040
	18h mem  0xfea00000 0x00100000
		[OK]
000:07:0 0x8086 0x7198 
		[OK]
000:07:1 0x8086 0x7199 
	20h port 0x0000ffa0 0x00000010
		[OK]
000:07:2 0x8086 0x719a 
	20h port 0x0000ef80 0x00000020
		[OK]
000:07:3 0x8086 0x719b 
		[OK]
--------------------------[  2 devices bogus]
 Physical memory end: 0x0ffe0000
 PCI memory mapped I/O space start: 0x10000000
[PCIBIOS fixup stage]-----------------------
  device vendor product
  register space address    size
--------------------------------------------
000:00:0 0x8086 0x7194 
		[OK]
000:00:1 0x8086 0x7195 
	10h port 0x0000e400 0x00000100
	14h port 0x0000ee80 0x00000040
		[OK]
000:03:0 0x104c 0xac51 
	10h mem  0x10000000 0x00001000
		[OK]
000:03:1 0x104c 0xac51 
	10h mem  0x10001000 0x00001000
		[OK]
000:05:0 0x1002 0x4c52 
	10h mem  0xfd000000 0x01000000
	14h port 0x0000e800 0x00000100
	18h mem  0xfebff000 0x00001000
		[OK]
000:06:0 0x8086 0x1229 
	10h mem  0xfebfe000 0x00001000
	14h port 0x0000ef00 0x00000040
	18h mem  0xfea00000 0x00100000
		[OK]
000:07:0 0x8086 0x7198 
		[OK]
000:07:1 0x8086 0x7199 
	20h port 0x0000ffa0 0x00000010
		[OK]
000:07:2 0x8086 0x719a 
	20h port 0x0000ef80 0x00000020
		[OK]
000:07:3 0x8086 0x719b 
		[OK]
--------------------------[  0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 847.12 MHz, id 0x686
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: PCI configuration registers:
  Common header:
    0x00: 0x71948086 0x22000006 0x06000001 0x00804000

    Vendor Name: Intel (0x8086)
    Device Name: 82443MX Host Bridge/Controller (0x7194)
    Command register: 0x0006
      I/O space accesses: off
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x2200
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: on
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: host (0x00)
    Interface: 0x00
    Revision ID: 0x01
    BIST: 0x00
    Header Type: 0x00+multifunction (0x80)
    Latency Timer: 0x40
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000000

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x00 (none)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x0000800f 0x09000000 0x11111000 0x11110000
    0x60: 0x20201010 0x00000000 0x01400a00 0x00002000
    0x70: 0x380a1f20 0x01000022 0x004a0526 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000104 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0xa7e70018 0x00000028
    0xd0: 0x0a0500ac 0x00000000 0x00000000 0x00000000
    0xe0: 0xbbffad4c 0x80003e8a 0xcff7d32c 0x00003e9d
    0xf0: 0x00040000 0x0028fa00 0x00000f3a 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82443MX Host Bridge/Controller (host bridge, revision 0x01) at ? dev 0 function 0 (tag 0x80000000, intrtag 0x80000000, intrswiz 0, intrpin 0, i/o off, mem on, no quirks)
pchb0: Intel 82443MX Host Bridge/Controller (rev. 0x01)
auich0 at pci0 dev 0 function 1: PCI configuration registers:
  Common header:
    0x00: 0x71958086 0x00000005 0x04010000 0x00000000

    Vendor Name: Intel (0x8086)
    Device Name: 82443MX AC-97 Audio Controller (0x7195)
    Command register: 0x0005
      I/O space accesses: on
      Memory space accesses: off
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0000
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: fast (0x0)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: multimedia (0x04)
    Subclass Name: audio (0x01)
    Interface: 0x00
    Revision ID: 0x00
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x0000e401 0x0000ee81 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x80cc1033
    0x30: 0x00000000 0x00000000 0x00000000 0x0000020a

    Base address register at 0x10
      type: 16-bit i/o
      base: 0x0000e400, size: 0x00000100
    Base address register at 0x14
      type: 16-bit i/o
      base: 0x0000ee80, size: 0x00000040
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x1033
    Subsystem ID: 0x80cc
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x02 (pin B)
    Interrupt line: 0x0a

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82443MX AC-97 Audio Controller (audio multimedia) at ? dev 0 function 1 (tag 0x80000100, intrtag 0x80000100, intrswiz 0, intrpin 0x2, i/o on, mem off, no quirks): i82440MX AC-97 Audio
auich0: interrupting at irq 10
auich0: DMA bug workaround enabled
Yamaha YMF743-S codec; 18 bit DAC, no 3D stereo
audioprobe: type=0 sa=0xc0431b64 hw=0xc03905a0
audio0 at auich0: full duplex, independent
audio_calc_blksize: record blksize=512
audio_calc_blksize: play blksize=512
audio_init_ringbuffer: blksize=512
audio_init_ringbuffer: blksize=512
audio_attach: inputs ports=0x7, input master=-1, output ports=0x0, output master=-1
cbb0 at pci0 dev 3 function 0: PCI configuration registers:
  Common header:
    0x00: 0xac51104c 0x02100007 0x06070000 0x00820000

    Vendor Name: Texas Instruments (0x104c)
    Device Name: PCI1420 PCI-CardBus Bridge (0xac51)
    Command register: 0x0007
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0210
      Capability List support: on
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: CardBus (0x07)
    Interface: 0x00
    Revision ID: 0x00
    BIST: 0x00
    Header Type: 0x02+multifunction (0x82)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 2 (PCI-CardBus bridge) header:
    0x10: 0x10000000 0x020000a0 0x00010100 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x04c00105
    0x40: 0x80cd1033 0x000003e1

    Base address register at 0x10 (CardBus socket/ExCA registers)
      type: 32-bit nonprefetchable memory
      base: 0x10000000, size: 0x00001000
    Capability list pointer: 0xa0
    Secondary status register: 0x0200
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detection: off
      DEVSEL timing: medium (0x1)
      PCI target aborts terminate CardBus bus master transactions: off
      CardBus target aborts terminate PCI bus master transactions: off
      Bus initiator aborts terminate initiator transactions: off
      System error: off
      Parity error: off
    PCI bus number: 0x00
    CardBus bus number: 0x01
    Subordinate bus number: 0x01
    CardBus latency timer: 0x00
    CardBus memory region 0:
      base register:  0x00000000
      limit register: 0x00000000
    CardBus memory region 1:
      base register:  0x00000000
      limit register: 0x00000000
    CardBus I/O region 0:
      base register:  0x00000000
      limit register: 0x00000000
    CardBus I/O region 1:
      base register:  0x00000000
      limit register: 0x00000000
    Interrupt line: 0x05
    Interrupt pin: 0x01 (pin A)
    Bridge control register: 0x04c0
      Parity error response: off
      CardBus SERR forwarding: off
      ISA enable: off
      VGA enable: off
      CardBus master abort reporting: off
      CardBus reset: on
      Functional interrupts routed by ExCA registers: on
      Memory window 0 prefetchable: off
      Memory window 1 prefetchable: off
      Write posting enable: on
    Subsystem vendor ID: 0x1033
    Subsystem ID: 0x80cd
    Base address register at 0x44 (legacy-mode registers)
      type: 32-bit i/o
      base: 0x000003e0, size: 0x00000004

  Capability register at 0xa0
    type: 0x01 (Power Management, rev. 1.0)

  Device-dependent header:
    0x48: 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x04049021 0x00000000 0x00000000 0x010c1722
    0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
    0xa0: 0xfe110001 0x00c00000 0x00000000 0x0000001f
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at ? dev 3 function 0 (tag 0x80001800, intrtag 0x80001800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
cbb1 at pci0 dev 3 function 1: PCI configuration registers:
  Common header:
    0x00: 0xac51104c 0x02100007 0x06070000 0x00820000

    Vendor Name: Texas Instruments (0x104c)
    Device Name: PCI1420 PCI-CardBus Bridge (0xac51)
    Command register: 0x0007
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0210
      Capability List support: on
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: CardBus (0x07)
    Interface: 0x00
    Revision ID: 0x00
    BIST: 0x00
    Header Type: 0x02+multifunction (0x82)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 2 (PCI-CardBus bridge) header:
    0x10: 0x10001000 0x020000a0 0x00020200 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x04c0020a
    0x40: 0x80cd1033 0x00000001

    Base address register at 0x10 (CardBus socket/ExCA registers)
      type: 32-bit nonprefetchable memory
      base: 0x10001000, size: 0x00001000
    Capability list pointer: 0xa0
    Secondary status register: 0x0200
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detection: off
      DEVSEL timing: medium (0x1)
      PCI target aborts terminate CardBus bus master transactions: off
      CardBus target aborts terminate PCI bus master transactions: off
      Bus initiator aborts terminate initiator transactions: off
      System error: off
      Parity error: off
    PCI bus number: 0x00
    CardBus bus number: 0x02
    Subordinate bus number: 0x02
    CardBus latency timer: 0x00
    CardBus memory region 0:
      base register:  0x00000000
      limit register: 0x00000000
    CardBus memory region 1:
      base register:  0x00000000
      limit register: 0x00000000
    CardBus I/O region 0:
      base register:  0x00000000
      limit register: 0x00000000
    CardBus I/O region 1:
      base register:  0x00000000
      limit register: 0x00000000
    Interrupt line: 0x0a
    Interrupt pin: 0x02 (pin B)
    Bridge control register: 0x04c0
      Parity error response: off
      CardBus SERR forwarding: off
      ISA enable: off
      VGA enable: off
      CardBus master abort reporting: off
      CardBus reset: on
      Functional interrupts routed by ExCA registers: on
      Memory window 0 prefetchable: off
      Memory window 1 prefetchable: off
      Write posting enable: on
    Subsystem vendor ID: 0x1033
    Subsystem ID: 0x80cd
    Base address register at 0x44 (legacy-mode registers)
      type: 32-bit i/o
      base: 0x00000000, size: 0x00000004

  Capability register at 0xa0
    type: 0x01 (Power Management, rev. 1.0)

  Device-dependent header:
    0x48: 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x04049021 0x00000000 0x00000000 0x010c1722
    0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
    0xa0: 0xfe110001 0x00c00000 0x00000000 0x0000001f
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Texas Instruments PCI1420 PCI-CardBus Bridge (CardBus bridge) at ? dev 3 function 1 (tag 0x80001900, intrtag 0x80001900, intrswiz 0, intrpin 0x2, i/o on, mem on, no quirks): Texas Instruments PCI1420 PCI-CardBus Bridge (rev. 0x00)
vga0 at pci0 dev 5 function 0: PCI configuration registers:
  Common header:
    0x00: 0x4c521002 0x02900087 0x03000064 0x00004008

    Vendor Name: ATI Technologies (0x1002)
    Device Name: Rage Mobility M1 (0x4c52)
    Command register: 0x0087
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: on
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0290
      Capability List support: on
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: display (0x03)
    Subclass Name: VGA (0x00)
    Interface: 0x00
    Revision ID: 0x64
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x40
    Cache Line Size: 0x08

  Type 0 ("normal" device) header:
    0x10: 0xfd000000 0x0000e801 0xfebff000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x807a1033
    0x30: 0xfebc0000 0x0000005c 0x00000000 0x0008010a

    Base address register at 0x10
      type: 32-bit nonprefetchable memory
      base: 0xfd000000, size: 0x01000000
    Base address register at 0x14
      type: 32-bit i/o
      base: 0x0000e800, size: 0x00000100
    Base address register at 0x18
      type: 32-bit nonprefetchable memory
      base: 0xfebff000, size: 0x00001000
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x1033
    Subsystem ID: 0x807a
    Expansion ROM Base Address: 0xfebc0000
    Capability list pointer: 0x5c
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x08
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x0a

  Capability register at 0x5c
    type: 0x01 (Power Management, rev. 1.0)

  Device-dependent header:
    0x40: 0x0000000c 0x00000000 0x00000000 0x00000000
    0x50: 0x00105c02 0xff000001 0x00000000 0x06010001
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

ATI Technologies Rage Mobility M1 (VGA display, revision 0x64) at ? dev 5 function 0 (tag 0x80002800, intrtag 0x80002800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): ATI Technologies Rage Mobility M1 (rev. 0x64)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fxp0 at pci0 dev 6 function 0: PCI configuration registers:
  Common header:
    0x00: 0x12298086 0x02900117 0x02000008 0x00004008

    Vendor Name: Intel (0x8086)
    Device Name: 82557 Fast Ethernet LAN Controller (0x1229)
    Command register: 0x0117
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: on
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): on
      Fast back-to-back transactions: off
    Status register: 0x0290
      Capability List support: on
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: network (0x02)
    Subclass Name: ethernet (0x00)
    Interface: 0x00
    Revision ID: 0x08
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x40
    Cache Line Size: 0x08

  Type 0 ("normal" device) header:
    0x10: 0xfebfe000 0x0000ef01 0xfea00000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x80641033
    0x30: 0xfe900000 0x000000dc 0x00000000 0x38080105

    Base address register at 0x10
      type: 32-bit nonprefetchable memory
      base: 0xfebfe000, size: 0x00001000
    Base address register at 0x14
      type: 32-bit i/o
      base: 0x0000ef00, size: 0x00000040
    Base address register at 0x18
      type: 32-bit nonprefetchable memory
      base: 0xfea00000, size: 0x00100000
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x1033
    Subsystem ID: 0x8064
    Expansion ROM Base Address: 0xfe900000
    Capability list pointer: 0xdc
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x38
    Minimum Grant: 0x08
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x05

  Capability register at 0xdc
    type: 0x01 (Power Management, rev. 1.0)

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0xfe220001
    0xe0: 0x3a004000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82557 Fast Ethernet LAN Controller (ethernet network, revision 0x08) at ? dev 6 function 0 (tag 0x80003000, intrtag 0x80003000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): i82559 Ethernet, rev 8
fxp0: interrupting at irq 5
fxp0: Ethernet address 00:00:4c:b7:19:95
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 7 function 0: PCI configuration registers:
  Common header:
    0x00: 0x71988086 0x0280000f 0x06010001 0x00800000

    Vendor Name: Intel (0x8086)
    Device Name: 82443MX PCI-to-ISA Bridge (0x7198)
    Command register: 0x000f
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: on
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: ISA (0x01)
    Interface: 0x00
    Revision ID: 0x01
    BIST: 0x00
    Header Type: 0x00+multifunction (0x80)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000000

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x00 (none)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x04b2004d
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x090a0a05 0x000000d0 0x0080fe00 0x00000000
    0x70: 0x00000000 0x0c0c0000 0x00000000 0x00000000
    0x80: 0x00070000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x02810004 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x25000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000f3a 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82443MX PCI-to-ISA Bridge (ISA bridge, revision 0x01) at ? dev 7 function 0 (tag 0x80003800, intrtag 0x80003800, intrswiz 0, intrpin 0, i/o on, mem on, no quirks)
pcib0: Intel 82443MX PCI-to-ISA Bridge (rev. 0x01)
pciide0 at pci0 dev 7 function 1: PCI configuration registers:
  Common header:
    0x00: 0x71998086 0x02800005 0x01018000 0x00002000

    Vendor Name: Intel (0x8086)
    Device Name: 82443MX IDE Controller (0x7199)
    Command register: 0x0005
      I/O space accesses: on
      Memory space accesses: off
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: mass storage (0x01)
    Subclass Name: IDE (0x01)
    Interface: 0x80
    Revision ID: 0x00
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x20
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x0000ffa1 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000000

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      type: 16-bit i/o
      base: 0x0000ffa0, size: 0x00000010
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x00 (none)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x0000e337 0x0000000b 0x00220003 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000f3a 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82443MX IDE Controller (IDE mass storage, interface 0x80) at ? dev 7 function 1 (tag 0x80003900, intrtag 0x80003900, intrswiz 0, intrpin 0, i/o on, mem off, no quirks): Intel 82440MX IDE controller (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 1: <TOSHIBA DVD-ROM SD-C2402, y000503407, 1709> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at pciide0 channel 0 drive 0: <IC25N030ATDA04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 28615 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: PCI configuration registers:
  Common header:
    0x00: 0x719a8086 0x02800005 0x0c030000 0x00004000

    Vendor Name: Intel (0x8086)
    Device Name: 82443MX USB Host Controller (0x719a)
    Command register: 0x0005
      I/O space accesses: on
      Memory space accesses: off
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: serial bus (0x0c)
    Subclass Name: USB (0x03)
    Interface: 0x00
    Revision ID: 0x00
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x40
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x0000ef81 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000409

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      type: 16-bit i/o
      base: 0x0000ef80, size: 0x00000020
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x04 (pin D)
    Interrupt line: 0x09

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000010 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00002000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000f3a 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82443MX USB Host Controller (USB serial bus) at ? dev 7 function 2 (tag 0x80003a00, intrtag 0x80003a00, intrswiz 0, intrpin 0x4, i/o on, mem off, no quirks): Intel 82443MX USB Host Controller (rev. 0x00)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82443MX Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 3: PCI configuration registers:
  Common header:
    0x00: 0x719b8086 0x0280000b 0x06800000 0x00000000

    Vendor Name: Intel (0x8086)
    Device Name: 82443MX Power Management Controller (0x719b)
    Command register: 0x000b
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: off
      Special cycles: on
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: miscellaneous (0x80)
    Interface: 0x00
    Revision ID: 0x00
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000000

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x00 (none)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x00000401 0x27842202 0x00081082 0x00000000
    0x50: 0x001d5800 0x0ffcc000 0x02000013 0x10000000
    0x60: 0x42e40062 0x50e40068 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x001103f0 0x00110700
    0x80: 0x00000001 0x00000000 0x00000000 0x00000000
    0x90: 0x00000441 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00010000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000f3a 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82443MX Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 3 (tag 0x80003b00, intrtag 0x80003b00, intrswiz 0, intrpin 0, i/o on, mem on, no quirks) not configured
cbb0: interrupting at irq 5
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 10
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
apm0 at mainbus0: Power Management spec V1.2
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
XFree86 aperture driver version 2.0
Pentium Pro MTRR support enabled

>How-To-Repeat:
Try to play any sound on a Nec Versa VXi.
>Fix:
Yes please!
>Release-Note:
>Audit-Trail:
>Unformatted: