Subject: kern/16943: time problems on SMP branch
To: None <gnats-bugs@gnats.netbsd.org>
From: None <jarle@uninett.no>
List: netbsd-bugs
Date: 05/21/2002 11:06:10
>Number: 16943
>Category: kern
>Synopsis: time problems on SMP branch
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Tue May 21 02:07:00 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Jarle Greipsland
>Release: NetBSD 1.5ZC
>Organization:
>Environment:
System: NetBSD splitter-pine.urc.uninett.no 1.5ZC NetBSD 1.5ZC (GENERIC.MPDEBUG) #5: Sun May 19 17:26:48 CEST 2002 jarle@splitter-pine.urc.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC.MPDEBUG i386
Architecture: i386
Machine: i386
>Description:
First, my apologies for the vagueness of this bug report. Feel free to ask
for more information.
My current SMP kernel from the sommerfeld_i386mp_1 branch (sys/arch/i386 +
sys/dev/pci from May 19th, other sources from Sat May 18 12:48:18 EDT 2002)
has problems with time keeping. I first noticed this when the tset command
run as part of the login process started got stuck. Running ktrace on tset
revealed that it got stuck in a call to nanosleep. Indeed, even a 'sleep
1' command at the shell prompt never returns. ktrace below.
10319 ktrace EMUL "netbsd"
10319 ktrace CALL execve(0xbfbfd25c,0xbfbfd730,0xbfbfd73c)
10319 ktrace NAMI "/sbin/sleep"
10319 ktrace RET execve -1 errno 2 No such file or directory
10319 ktrace CALL execve(0xbfbfd25c,0xbfbfd730,0xbfbfd73c)
10319 ktrace NAMI "/usr/sbin/sleep"
10319 ktrace RET execve -1 errno 2 No such file or directory
10319 ktrace CALL execve(0xbfbfd25c,0xbfbfd730,0xbfbfd73c)
10319 ktrace NAMI "/bin/sleep"
10319 sleep EMUL "netbsd"
10319 sleep RET execve JUSTRETURN
10319 sleep CALL issetugid
10319 sleep RET issetugid 0
10319 sleep CALL __sigaction14(0xe,0xbfbfd660,0xbfbfd648)
10319 sleep RET __sigaction14 0
10319 sleep CALL nanosleep(0xbfbfd6b8,0)
10319 sleep PSIG SIGINT SIG_DFL
This problem also seems to cause network connections in the TIME_WAIT state
to linger on forever. A (now) idle system has had more than 500 of these
hanging around for more than an hour.
[ ... ]
tcp 0 0 localhost.8000 localhost.49173 TIME_WAIT
tcp 0 0 localhost.8000 localhost.49172 TIME_WAIT
tcp 0 0 localhost.8000 localhost.49171 TIME_WAIT
tcp 0 0 localhost.8000 localhost.49170 TIME_WAIT
[ ... ]
The system has problems keeping time via ntpd as well. The message log is
littered with messages of the type:
May 20 17:44:58 splitter-pine ntpd[173]: time reset 3.327509 s
May 20 18:05:40 splitter-pine ntpd[173]: time reset 4.422287 s
May 20 18:26:13 splitter-pine ntpd[173]: time reset 4.749347 s
May 20 18:46:45 splitter-pine ntpd[173]: time reset 4.600332 s
May 20 19:07:33 splitter-pine ntpd[173]: time reset 4.533651 s
May 20 19:28:05 splitter-pine ntpd[173]: time reset 4.300248 s
May 20 19:48:44 splitter-pine ntpd[173]: time reset 4.152079 s
May 20 20:09:08 splitter-pine ntpd[173]: time reset 3.172825 s
May 20 20:29:37 splitter-pine ntpd[173]: time reset 4.490342 s
May 20 20:50:12 splitter-pine ntpd[173]: time reset 4.267305 s
May 20 21:10:39 splitter-pine ntpd[173]: time reset 5.712391 s
dmesg follows:
NetBSD 1.5ZC (GENERIC.MPDEBUG) #5: Sun May 19 17:26:48 CEST 2002
jarle@splitter-pine.urc.uninett.no:/usr/src/sys/arch/i386/compile/GENERIC.MPDEBUG
total memory = 1023 MB
avail memory = 930 MB
using 6144 buffers containing 52508 KB of memory
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xfe710
mainbus0: MP config table at 0xf0000, 468 bytes long
mainbus0: Intel MP Specification (Version 1.4) (DELL PowerEdge 83)
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: Intel Pentium II/Celeron (Deschutes) (686-class), 450.01 MHz
cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183fbff<FXSR>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 32 page colors
cpu0: kstack at 0xe4277000 for 8192 bytes
cpu0: idle pcb at 0xe4277000, idle sp at 0xe4278f98
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium II/Celeron (Deschutes) (686-class), 449.98 MHz
cpu1: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu1: features 183fbff<FXSR>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 512 KB 32b/line 4-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: kstack at 0xe4289000 for 8192 bytes
cpu1: idle pcb at 0xe4289000, idle sp at 0xe428af98
cpu2 at mainbus0: apid 2 (application processor)
cpu2: starting
cpu2: Intel Pentium II/Celeron (Deschutes) (686-class), 449.98 MHz
cpu2: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu2: features 183fbff<FXSR>
cpu2: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu2: L2 cache 512 KB 32b/line 4-way
cpu2: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu2: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu2: kstack at 0xe429b000 for 8192 bytes
cpu2: idle pcb at 0xe429b000, idle sp at 0xe429cf98
cpu3 at mainbus0: apid 1 (application processor)
cpu3: starting
cpu3: Intel Pentium II/Celeron (Deschutes) (686-class), 449.98 MHz
cpu3: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu3: features 183fbff<FXSR>
cpu3: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu3: L2 cache 512 KB 32b/line 4-way
cpu3: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu3: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu3: kstack at 0xe42ad000 for 8192 bytes
cpu3: idle pcb at 0xe42ad000, idle sp at 0xe42aef98
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type ISA
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 4
ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int16 attached to pci2 device 1 INT_B (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int16 attached to pci2 device 3 INT_C (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int16 attached to pci2 device 5 INT_D (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int16 attached to pci2 device 7 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int17 attached to pci2 device 1 INT_C (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int17 attached to pci2 device 3 INT_D (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int17 attached to pci2 device 5 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int17 attached to pci2 device 7 INT_B (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int18 attached to pci2 device 1 INT_D (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int18 attached to pci2 device 3 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int18 attached to pci2 device 5 INT_B (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int18 attached to pci2 device 7 INT_C (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int19 attached to pci2 device 1 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int19 attached to pci2 device 3 INT_B (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int19 attached to pci2 device 5 INT_C (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int19 attached to pci2 device 7 INT_D (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int20 attached to pci0 device 6 INT_B (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int20 attached to pci0 device 8 INT_C (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int20 attached to pci0 device 10 INT_D (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int20 attached to pci1 device 8 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int21 attached to pci1 device 4 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int22 attached to pci1 device 6 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int14 attached to pci0 device 6 INT_C (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int14 attached to pci0 device 8 INT_D (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: int14 attached to pci0 device 10 INT_A (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
local apic: int1 attached to NMI (type 1<type=1=NMI> flags 5<pol=1=Act Hi,trig=1=Edge>)
mainbus0: MP WARNING: 128 bytes of extended entries not examined
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pcib0 at pci0 dev 2 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 2 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: device disabled (at device)
uhci0 at pci0 dev 2 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: can't map i/o space
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 2 function 3 not configured
vga1 at pci0 dev 4 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
fxp0 at pci0 dev 10 function 0: i82558 Ethernet, rev 5
fxp0: interrupting at apic 4 int 14 (irq 14)
fxp0: detected 64 word EEPROM
fxp0: Ethernet address 00:90:27:45:e3:2a
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb0 at pci0 dev 16 function 0
pchb0: Intel 82451NX Memory & I/O Controller (MIOC) (rev. 0x03)
pchb1 at pci0 dev 18 function 0
pchb1: Intel 82451NX PCI Expander Bridge (PXB) (rev. 0x02)
pchb2 at pci0 dev 19 function 0
pchb2: Intel 82451NX PCI Expander Bridge (PXB) (rev. 0x02)
pci1 at pchb2 bus 1
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc1 at pci1 dev 4 function 0
ahc1: interrupting at apic 4 int 21 (irq 11)
ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci1 dev 6 function 0
ahc2: interrupting at apic 4 int 22 (irq 10)
ahc2: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
ahc3 at pci1 dev 8 function 0
ahc3: interrupting at apic 4 int 20 (irq 5)
ahc3: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
scsibus2 at ahc3: 8 targets, 8 luns per target
pchb3 at pci0 dev 20 function 0
pchb3: Intel 82451NX PCI Expander Bridge (PXB) (rev. 0x02)
pci2 at pchb3 bus 2
pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pmsprobe: reset error 5
lpt0 at isa0 port 0x378-0x37b irq 7
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
seaprobe: board type unknown at address 0xc093e000
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 0 netmask 0 ttymask 0
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300d0<vector=d0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
ioapic0: int1 1a0<vector=a0,delmode=1,dest=0> 3000000<target=3>
ioapic0: int2 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int3 1e1<vector=e1,delmode=1,dest=0> 3000000<target=3>
ioapic0: int4 1e2<vector=e2,delmode=1,dest=0> 3000000<target=3>
ioapic0: int5 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int6 170<vector=70,delmode=1,dest=0> 3000000<target=3>
ioapic0: int7 1a1<vector=a1,delmode=1,dest=0> 3000000<target=3>
ioapic0: int8 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int9 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int10 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int11 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int12 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int13 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int14 a181<vector=81,delmode=1,actlo,level,dest=0> 3000000<target=3>
ioapic0: int15 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int16 1a100<vector=0,delmode=1,actlo,level,masked,dest=0> 0<target=0>
ioapic0: int17 1a100<vector=0,delmode=1,actlo,level,masked,dest=0> 0<target=0>
ioapic0: int18 1a100<vector=0,delmode=1,actlo,level,masked,dest=0> 0<target=0>
ioapic0: int19 1a100<vector=0,delmode=1,actlo,level,masked,dest=0> 0<target=0>
ioapic0: int20 a171<vector=71,delmode=1,actlo,level,dest=0> 3000000<target=3>
ioapic0: int21 a172<vector=72,delmode=1,actlo,level,dest=0> 3000000<target=3>
ioapic0: int22 a173<vector=73,delmode=1,actlo,level,dest=0> 3000000<target=3>
ioapic0: int23 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <IBM, DNES-318350Y, SA60> SCSI3 0/direct fixed
sd0: 17366 MB, 11474 cyl, 10 head, 309 sec, 512 bytes/sect x 35566501 sectors
sd0: sync (25.0ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <QUANTUM, QM34500TD-SCA, N1K0> SCSI2 0/direct fixed
sd1: 4341 MB, 8057 cyl, 5 head, 220 sec, 512 bytes/sect x 8891624 sectors
sd1: sync (25.0ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: <QUANTUM, QM34500TD-SCA, N1K0> SCSI2 0/direct fixed
sd2: 4341 MB, 8057 cyl, 5 head, 220 sec, 512 bytes/sect x 8891624 sectors
sd2: sync (25.0ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 6 lun 0: <DELL, 1x3 U2W SCSI BP, 5.39> SCSI2 3/processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
cd0 at scsibus2 target 5 lun 0: <NEC, CD-ROM DRIVE:465, 1.03> SCSI2 5/cdrom removable
cd0: sync (50.0ns offset 15), 8-bit (20.000MB/s) transfers
boot device: sd0
root on sd0a dumps on sd0b
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 200d0<vector=d0,delmode=0,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 0 running
cpu3: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: timer0 200d0<vector=d0,delmode=0,dest=0> 0<target=0>
cpu3: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu3: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu3: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu3: CPU 1 running
cpu2: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: timer0 200d0<vector=d0,delmode=0,dest=0> 0<target=0>
cpu2: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu2: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu2: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu2: CPU 2 running
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted: