>Number:         16898
>Category:       kern
>Synopsis:       AGP problems
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun May 19 07:54:01 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator:     Martti Kuparinen
>Release:        NetBSD 1.5ZC
>Organization:
>Environment:
System: NetBSD p4 1.5ZC NetBSD 1.5ZC (P4) #0: Mon Apr 29 12:24:21 EEST 2002 root@p4:/usr/src/sys/arch/i386/compile/P4 i386
Architecture: i386
Machine: i386
>Description:

I just made a clean install of 1.5ZC and the installation itself went fine.
The first reboot failed (or froze my PC) with the GENERIC kernel after
detecting the AGP.

The solution to my problem was to create a custon kernel without
"agp* at pchb?" line. Here's my dmesg without "agp* at pchb?":

NetBSD 1.5ZC (OMNIBOOK) #2: Sun May 19 16:41:38 UTC 2002
    root@localhost:/work/netbsd/src/sys/arch/i386/compile/OMNIBOOK
cpu0: Intel Pentium II/Celeron (Deschutes) (686-class), 297.80 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 127 MB
avail memory = 111 MB
using 1657 buffers containing 6628 KB of memory
BIOS32 rev. 0 found at 0xfd7a0
PCI BIOS rev. 2.1 found at 0xfd9db
PCI IRQ Routing Table rev. 1.0 found at 0xfdf60, size 128 bytes (6 entries)
PCI Interrupt Router at 000:07:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
WARNING: can't reserve area for I/O APIC.
pci_addr_fixup: 000:00:0 0x8086 0x7190 new address 0x08000000
pci_addr_fixup: 000:04:0 0x104c 0xac17 new address 0x0c000000
pci_addr_fixup: 000:04:1 0x104c 0xac17 new address 0x0c001000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x02)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Neomagic MagicMedia 256AV Audio (audio multimedia, revision 0x20) at pci1 dev 0 function 1 not configured
Texas Instruments PCI1220 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at pci0 dev 4 function 0 not configured
Texas Instruments PCI1220 PCI-CardBus Bridge (CardBus bridge, revision 0x02) at pci0 dev 4 function 1 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHN2200AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
wss0 at isa0 port 0x530-0x537 irq 10 drq 0,1: CS4231
audio1 at wss0: full duplex, mmap
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq 
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask efcd netmask efcd ttymask ffcf
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..7..11..15
pcic0: using irq 3 for socket events
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
ep0 at pcmcia0 function 0 port 0x400-0x40f: 3Com 3c589 10Mbps Ethernet
ep0: address 00:10:5a:2d:3d:03, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 7
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted: