>Number:         12032
>Category:       kern
>Synopsis:       ex1 at cardbus does not work.
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Jan 22 19:44:01 PST 2001
>Closed-Date:
>Last-Modified:
>Originator:     Masanori Kanaoka
>Release:        NetBSD-current(1.5Q)
>Organization:
>Environment:
NetBSD kana1.ann.hi-ho.ne.jp 1.5Q NetBSD 1.5Q (PCIBIOS) #6: Fri Jan 19 13:26:19 JST 2001     root@kana1.ann.hi-ho.ne.jp:/usr/src/sys/arch/i386/compile/PCIBIOS i386

>Description:
I have two next Cards.
	3Com	3CXFE575BT	CardBus
	3Com	3CCFE575CT	CardBus
dmesg output is below:
cbb0 at pci0 dev 2 function 0: Toshiba ToPIC95B CardBus-PCI Bridge (rev. 0x07)
cbb1 at pci0 dev 2 function 1: Toshiba ToPIC95B CardBus-PCI Bridge (rev. 0x07)

cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
ex0 at cardbus0 dev 0 function 0: 3Com 3c575CT Ethernet
ex0: MAC address 00:50:04:b6:85:bf
ukphy0 at ex0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c039, model 0x0014, rev. 11
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at cardbus1 dev 0 function 0: 3Com 3c575B-TX Ethernet
ex1: MAC address 00:00:86:33:64:dd
ukphy1 at ex1 phy 0: Generic IEEE 802.3u media interface
ukphy1: OUI 0x00c039, model 0x0014, rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

ex1 at cardbus does not work for me.
It seems that dose not have relation to CT,BT and card slot.
ex1 does not work for me.

I also test two rtk cards,rtk0 and rtk1 works fine for me.
I also test two tlp cards,tlp1 and tlp2 works fine for me.
(My note-PC include tlp0 at pci.)





>How-To-Repeat:
Using two ex cards,and test ex1.
>Fix:
I'm sorry,I do not know how to fix this problem.
>Release-Note:
>Audit-Trail:
>Unformatted: