Subject: kern/10280: cbb doesn't ever work on my thinkpad 760EL.
To: None <gnats-bugs@gnats.netbsd.org>
From: None <cgd@netbsd.org>
List: netbsd-bugs
Date: 06/05/2000 05:56:45
>Number:         10280
>Category:       kern
>Synopsis:       cbb doesn't work on thinkpad 760EL due to unconfigured intr.
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Jun 04 22:57:00 PDT 2000
>Closed-Date:
>Last-Modified:
>Originator:     Chris G. Demetriou
>Release:        NetBSD-current as of 2000.06.04, evening.
>Organization:
>Environment:
System: NetBSD/i386, -current kernel as of date above.  ThinkPad 760EL.

>Description:
	cbb doesn't work on my thinkpad 760EL, due to unconfigured interrupt:

		cbb0: NOT USED because of unconfigured interrupt

	this is despite turning on all of the PCI BIOS related options
	people have said might make this better.

	full dmesg output and kernel config is below.

	i'm really keen on using cbb, because based on the experiences
	I think i've heard others report, CF cards are more likely to work
	with the cbb -- they seem to hang the system quite well when
	it's using the pcic drvr.

>How-To-Repeat:

	kernel config:
	
#	$NetBSD: GENERIC,v 1.347 2000/06/01 04:24:01 david Exp $
#
#	GENERIC -- everything that's currently supported
#

include "arch/i386/conf/std.i386"

#ident 		"GENERIC-$Revision: 1.347 $"

maxusers	32		# estimated number of users

# CPU support.  At least one is REQUIRED.
#options 	I386_CPU
#options 	I486_CPU
options 	I586_CPU
#options 	I686_CPU

# CPU-related options.
options 	MATH_EMULATE	# floating point emulation
#options 	VM86		# virtual 8086 emulation
options 	USER_LDT	# user-settable LDT; used by WINE
# eliminate delay no-ops in I/O; recommended on all but very old machines
#options 	DUMMY_NOPS

# delay between "rebooting ..." message and hardware reset, in milliseconds
#options 	CPURESET_DELAY=2000

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options 	"CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
#	you don't want the option below ON iff you are using the
#	serial console option of the new boot strap code.
#options 	CONS_OVERRIDE	# Always use above! independent of boot info

# The following options override the memory sizes passed in from the boot
# block.  Use them *only* if the boot block is unable to determine the correct
# values.  Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options 	REALBASEMEM=639		# size of base memory (in KB)
#options 	REALEXTMEM=15360	# size of extended memory (in KB)

# Standard system options

options 	UCONSOLE	# users can use TIOCCONS (for xconsole)
options 	INSECURE	# disable kernel security levels

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=1024	# 1024 pages is the default

#options 	LKM		# loadable kernel modules

# Diagnostic/debugging support options
options 	DIAGNOSTIC	# cheap kernel consistency checks
options 	DEBUG		# expensive debugging checks/support
options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
#options 	DDB		# in-kernel debugger
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	KGDB		# remote debugger
#options 	"KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
makeoptions	DEBUG="-g"	# compile full symbol table

# Compatibility options
#options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
#options 	COMPAT_09	# NetBSD 0.9,
#options 	COMPAT_10	# NetBSD 1.0,
#options 	COMPAT_11	# NetBSD 1.1,
#options 	COMPAT_12	# NetBSD 1.2,
options 	COMPAT_13	# NetBSD 1.3,
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_43	# and 4.3BSD
options 	COMPAT_386BSD_MBRPART # recognize old partition ID

options 	COMPAT_SVR4	# binary compatibility with SVR4
options 	COMPAT_IBCS2	# binary compatibility with SCO and ISC
options 	COMPAT_LINUX	# binary compatibility with Linux
options 	COMPAT_FREEBSD	# binary compatibility with FreeBSD

options 	COMPAT_AOUT	# binary compat for NetBSD a.out binaries

# File systems
file-system 	FFS		# UFS
#file-system 	EXT2FS		# second extended file system (linux)
#file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
#file-system 	NTFS		# Windows/NT file system (experimental)
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
#file-system 	FDESC		# /dev/fd
#file-system 	KERNFS		# /kern
#file-system 	NULLFS		# loopback file system
#file-system 	OVERLAY		# overlay file system
#file-system 	PORTAL		# portal filesystem (still experimental)
#file-system 	PROCFS		# /proc
#file-system 	UMAPFS		# NULLFS + uid and gid remapping
#file-system 	UNION		# union file system
#file-system	CODA		# Coda File System; also needs vcoda (below)

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independent support
#options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER	# Network File System server
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Pull in config fragments for kernel crypto.  This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.

#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix

#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix

# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
#options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support

# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
#options 	TCP_COMPAT_42

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options 	EISAVERBOSE	# verbose EISA device autoconfig messages
options 	MIIVERBOSE	# verbose PHY autoconfig messages
options 	PCIVERBOSE	# verbose PCI device autoconfig messages
options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
#options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
options 	SCSIVERBOSE	# human readable SCSI error messages
options 	USBVERBOSE	# verbose USB device autoconfig messages
#options 	PNPBIOSVERBOSE	# verbose PnP BIOS messages
#options	PNPBIOSDEBUG	# more fullsome Pnp BIOS debugging messages
options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

options		MSGBUFSIZE="(256 * 1024)"

#
# wscons options
#
# builtin terminal emulations
#options 	WSEMUL_SUN		# sun terminal emulation
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?
#config		netbsd	root on sd0a type ffs
#config		netbsd	root on ? type nfs

#
# Device configuration
#

mainbus0 at root

apm0	at mainbus0			# Advanced power management

# Tuning for power management, see apm(4) for more details.
#options 	APM_NO_IDLE		# Don't call BIOS CPU idle function
#options 	APM_V10_ONLY		# Use only the APM 1.0 calls
#options 	APM_NO_POWEROFF		# Don't power off on halt(8)
#options 	APM_POWER_PRINT		# Don't print stats on the console
#options 	APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts


# Basic Bus Support

# Plug-and-Play BIOS and attached devices

#pnpbios*	at mainbus?

# mainboard audio chips
#ess*		at pnpbios? index ?	# ESS AudioDrive
#sb*		at pnpbios? index ?	# NeoMagic 256AV in sb mode
#wss*		at pnpbios? index ?	# NeoMagic 256AV in wss mode
#ym*		at pnpbios? index ?	# OPL3-SA3

# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0.  A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com*		at pnpbios? index ?	# serial ports

# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt*		at pnpbios? index ?	# parallel ports

#pckbc*		at pnpbios? index ?	# PC keyboard/mouse controller
#fdc*		at pnpbios? index ?	# floppy controller

# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios? index ?

# PCI bus support
pci*	at mainbus? bus ?
pci*	at pchb? bus ?
pci*	at ppb? bus ?

# Configure PCI using BIOS information
options 	PCIBIOS			# PCI BIOS support
options 	PCIBIOSVERBOSE		# PCI BIOS verbose info
options 	PCIBIOS_INTR_FIXUP	# fixup PCI interrupt routing
#options 	PCIBIOS_IRQS_HINT="0x0a00" # PCI interrupts hint. IRQ 9 or 11
options 	PCIINTR_DEBUG		# super-verbose PCI interrupt fixup
options 	PCIBIOS_BUS_FIXUP	# fixup PCI bus numbering
#options 	PCIBIOS_ADDR_FIXUP	# fixup PCI I/O addresses

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pceb*	at pci? dev ? function ?	# PCI-EISA bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc*	at pci? dev ? function ?	# PCI "universal" comm. cards

# EISA bus support
eisa*	at mainbus?
eisa*	at pceb?

# ISA bus support
isa*	at mainbus?
isa*	at pceb?
isa*	at pcib?

# PCMCIA bus support
pcmcia*	at pcic? controller ? socket ?
pcmcia*	at tcic? controller ? socket ?

# ISA PCMCIA controllers
pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1	at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
tcic0	at isa? port 0x240 iomem 0xd0000 iosiz 0x10000

# PCI PCMCIA controllers
pcic0	at pci? dev? function ?

# ISA Plug-and-Play bus support
isapnp0	at isa?

# ISA Plug-and-Play PCMCIA controllers
pcic*	at isapnp?

# CardBus bridge support
cbb*		at pci? dev ? function ?
cardslot*	at cbb?	

# CardBus bus support
cardbus*	at cardslot?
pcmcia* 	at cardslot?

# Coprocessor Support

# Math Coprocessor support
npx0	at isa? port 0xf0 irq 13	# x86 math coprocessor


# Console Devices

# ISA console.  You can only configure one of these!
#pc0	at isa? port 0x60 irq 1		# pccons generic PC console driver
#vt0	at isa? port 0x60 irq 1		# PCVT console driver
# Keyboard layout configuration for pccons
#options 	FRENCH_KBD
#options 	FINNISH_KBD
#options 	GERMAN_KBD
#options 	NORWEGIAN_KBD
# pccons-specific option:
#options 	XSERVER_DDB	# PF12 gets you into DDB when X is running
# pccons/pcvt -specific option:
#options 	XSERVER		# X server support


# wscons
pckbc0		at isa?			# pc keyboard controller
pckbd*		at pckbc?		# PC keyboard
# "opms" should not be enabled together with "pms" or "pmsi"
pms*		at pckbc?		# PS/2 mouse for wsmouse
pmsi*		at pckbc?		# PS/2 "Intelli"mouse for wsmouse
#opms*		at pckbc?		# backwards compatible PS/2 mouse
vga0		at isa?
vga*		at pci? dev ? function ?
pcdisplay0	at isa?			# CGA, MDA, EGA, HGA
wsdisplay*	at vga? console ?
wsdisplay*	at pcdisplay? console ?
wskbd* 		at pckbd? console ?
wsmouse*	at pms? mux 0
wsmouse*	at pmsi? mux 0

pcppi0		at isa?
sysbeep0	at pcppi?

# Serial Devices

# PCI serial interfaces
com*	at puc? port ?			# 16x50s on "universal" comm boards
cy*	at pci? dev ? function ?	# Cyclades Cyclom-Y serial boards
cz*	at pci? dev ? function ?	# Cyclades-Z multi-port serial boards

# ISA Plug-and-Play serial interfaces
com*	at isapnp?			# Modems and serial boards

# PCMCIA serial interfaces
com*	at pcmcia? function ?		# Modems and serial cards

pcmcom*	at pcmcia? function ?		# PCMCIA multi-port serial cards
com*	at pcmcom? slave ?		# ...and the slave devices

# CardBus serial interfaces
com*	at cardbus? function ?		# Modems and serial cards

# ISA serial interfaces
#options 	COM_HAYESP		# adds Hayes ESP serial board support
com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
com1	at isa? port 0x2f8 irq 3
com2	at isa? port 0x3e8 irq 5
#com3	at isa? port 0x2e8 irq 9
#ast0	at isa? port 0x1a0 irq 5	# AST 4-port serial cards
#com*	at ast? slave ?
#boca0	at isa? port 0x100 irq 5	# BOCA 8-port serial cards
#boca0	at isa? port 0x100 irq 5	# BOCA 16-port serial cards (BB2016)
#boca1	at isa? port 0x140 irq 5	# this line is also needed for BB2016
#com*	at boca? slave ?
#tcom0	at isa? port 0x100 irq 7	# TC-800 8-port serial cards
#com*	at tcom? slave ?
#rtfps0	at isa? port 0x1230 irq 10	# RT 4-port serial cards
#com*	at rtfps? slave ?
#cy0	at isa? iomem 0xd4000 irq 12	# Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5	# Addonics FlexPort 8S
#com*	at addcom? slave ?

# Parallel Printer Interfaces

# PCI parallel printer interfaces
lpt*	at puc? port ?			# || ports on "universal" comm boards

# ISA parallel printer interfaces
lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports
lpt1	at isa? port 0x278
lpt2	at isa? port 0x3bc

# LM7[89] and compatible hardware monitors
#lm0	at isa?	port 0x290		# other common ports: 0x280, 0x310

# VIA VT82C686A hardware monitor
#viapm*	at pci? dev ? function ?
#viaenv* at viapm?

# SCSI Controllers and Devices

# PCI SCSI controllers
adv*	at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
bha*	at pci? dev ? function ?	# BusLogic 9xx SCSI
dpt*	at pci? dev ? function ?	# DPT SmartCache/SmartRAID
isp*	at pci? dev ? function ?	# Qlogic ISP [12]0x0 SCSI/FibreChannel
ncr*	at pci? dev ? function ?	# NCR 53c8xx SCSI
#siop*	at pci? dev ? function ?	# Symbios 53c8xx SCSI (experimental)
pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI

# EISA SCSI controllers
ahb*	at eisa? slot ?			# Adaptec 174[02] SCSI
ahc*	at eisa? slot ?			# Adaptec 274x, aic7770 SCSI
bha*	at eisa? slot ?			# BusLogic 7xx SCSI
dpt*	at eisa? slot ?			# DPT EATA SCSI
uha*	at eisa? slot ?			# UltraStor 24f SCSI

# PCMCIA SCSI controllers
aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI
esp*	at pcmcia? function ?		# Qlogic ESP406/FAS408 SCSI

# ISA Plug-and-Play SCSI controllers
aha*	at isapnp? 			# Adaptec AHA-154[02
aic*	at isapnp?			# Adaptec AHA-1520B

# ISA SCSI controllers
adv0	at isa? port ? irq ? drq ?	# AdvanSys APB-514[02]
aha0	at isa? port 0x330 irq ? drq ?	# Adaptec 154[02] SCSI
aha1	at isa? port 0x334 irq ? drq ?
ahc0	at isa? port ? irq ?		# Adaptec 284x SCSI
aic0	at isa? port 0x340 irq 11	# Adaptec 152[02] SCSI
bha0	at isa? port 0x330 irq ? drq ?	# BusLogic [457]4X SCSI
bha1	at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0	at isa? port 0x170 irq ? drq ?	# DPT SmartCache/SmartRAID
#nca0	at isa? port 0x360 irq 15	# Port-mapped NCR 53C80 contoller
#nca1	at isa? iomem 0xd8000 irq 5	# Memory-mapped controller (T128, etc.)
sea0	at isa? iomem 0xc8000 irq 5	# Seagate/Future Domain SCSI
uha0	at isa? port 0x330 irq ? drq ?	# UltraStor [13]4f SCSI
uha1	at isa? port 0x340 irq ? drq ?
wds0	at isa? port 0x350 irq 15 drq 6	# WD7000 and TMC-7000 controllers
wds1	at isa? port 0x358 irq 11 drq 5

# CardBus SCSI cards
ahc*	at cardbus? dev ? function ?	# Adaptec ADP-1480

# SCSI bus support
scsibus* at adv?
scsibus* at adw?
scsibus* at aha?
scsibus* at ahb?
scsibus* at ahc?
scsibus* at aic?
scsibus* at bha?
scsibus* at dpt?
scsibus* at esp?
scsibus* at isp?
#scsibus* at nca?
scsibus* at ncr?
scsibus* at pcscp?
scsibus* at sea?
#scsibus at siop?
scsibus* at uha?
scsibus* at wds?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
ch*	at scsibus? target ? lun ?	# SCSI autochangers
ss*	at scsibus? target ? lun ?	# SCSI scanners
ses*	at scsibus? target ? lun ?	# SCSI Enclosure Services devices
uk*	at scsibus? target ? lun ?	# SCSI unknown

# RAID controllers and devices
cac*	at pci? dev ? function ?	# Compaq array controller
ca*	at cac? unit ?			# Compaq array disk device

# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000

# ISA Plug-and-Play IDE controllers
wdc*	at isapnp? 

# PCMCIA IDE controllers
wdc*	at pcmcia? function ?

# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
wdc0	at isa? port 0x1f0 irq 14 flags 0x00
wdc1	at isa? port 0x170 irq 15 flags 0x00

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*	at wdc? channel ? drive ? flags 0x0000
wd*	at pciide? channel ? drive ? flags 0x0000

# ATAPI bus support
atapibus* at wdc? channel ?
atapibus* at pciide? channel ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown


# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
#fdc1	at isa? port 0x370 irq ? drq ?
fd*	at fdc? drive ?			# the drives themselves
# some machines need you to do this instead of fd*
#fd0	at fdc0 drive 0

# ISA CD-ROM devices
#mcd0	at isa? port 0x300 irq 10	# Mitsumi CD-ROM drives

# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0	at isa? port 0x308 irq 5 drq 1	# Archive and Wangtek QIC tape drives


# Network Interfaces

# PCI network interfaces
de*	at pci? dev ? function ?	# DEC 21x4x-based Ethernet
en*	at pci? dev ? function ?	# ENI/Adaptec ATM
ep*	at pci? dev ? function ?	# 3Com 3c59x
ex*	at pci? dev ? function ?	# 3Com 90x[B]
epic*	at pci? dev ? function ?	# SMC EPIC/100 Ethernet
esh*	at pci? dev ? function ?	# Essential HIPPI card
fpa*	at pci? dev ? function ?	# DEC DEFPA FDDI
fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
le*	at pci? dev ? function ?	# PCnet-PCI Ethernet
lmc*	at pci? dev ? function ?	# Lan Media Corp SSI/HSSI/DS3
ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
ntwoc*	at pci? dev ? function ?	# Riscom/N2 PCI Sync Serial
rtk*	at pci? dev ? function ?	# Realtek 8129/8139
sip*	at pci? dev ? function ?	# SiS 900 Ethernet
ti*	at pci? dev ? function ?	# Alteon ACEnic gigabit Ethernet
tl*	at pci? dev ? function ?	# ThunderLAN-based Ethernet
tlp*	at pci? dev ? function ?	# DECchip 21x4x (and clones) Ethernet
#options 	TLP_MATCH_21040
#options 	TLP_MATCH_21041
#options 	TLP_MATCH_21140
#options 	TLP_MATCH_21142
vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet

# EISA network interfaces
ep*	at eisa? slot ?			# 3Com 3c579 Ethernet
fea*	at eisa? slot ?			# DEC DEFEA FDDI
tlp*	at eisa? slot ?			# DEC DE-425 Ethernet

# ISA Plug-and-Play network interfaces
ep*	at isapnp?			# 3Com 3c509 Ethernet
ne*	at isapnp?			# NE2000-compatible Ethernet
tr*	at isapnp?			# IBM/3COM TROPIC Token-Ring

# PCMCIA network interfaces
awi*	at pcmcia? function ?		# BayStack 650/660 (802.11FH/DS)
cnw*	at pcmcia? function ?		# Xircom/Netwave AirSurfer
ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
mbe*	at pcmcia? function ?		# MB8696x based Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
ray*	at pcmcia? function ?		# Raytheon Raylink (802.11)
sm*	at pcmcia? function ?		# Megahertz Ethernet
wi*	at pcmcia? function ?		# Lucent WaveLan IEEE (802.11)
#xe*	at pcmcia? function ?		# Xircom PCMCIA cards

mhzc*	at pcmcia? function ?		# Megahertz Ethernet/Modem combo cards
com*	at mhzc?
sm*	at mhzc?

# ISA network interfaces
ate0	at isa? port 0x2a0 irq ?		# AT1700
cs0	at isa? port 0x300 iomem ? irq ? drq ?	# CS8900 Ethernet
ec0	at isa? port 0x250 iomem 0xd8000 irq 9	# 3Com 3c503 Ethernet
eg0	at isa? port 0x280 irq 9		# 3C505 ethernet cards
el0	at isa? port 0x300 irq 9		# 3C501 ethernet cards
ep*	at isa? port ? irq ?			# 3C509 ethernet cards
ef0	at isa? port 0x360 iomem 0xd0000 irq 7	# 3C507
ai0	at isa? port 0x360 iomem 0xd0000 irq 7	# StarLAN
fmv0	at isa? port 0x2a0 irq ?		# FMV-180 series
ix0	at isa? port 0x300 irq 10		# EtherExpress/16
iy0	at isa? port 0x360 irq ?		# EtherExpress PRO 10 ISA
lc0	at isa? port 0x320 iomem ? irq ?	# DEC EtherWORKS III (LEMAC)
#depca0	at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5	# DEPCA
#le*	at depca?
nele0	at isa? port 0x320 irq 9 drq 7		# NE2100
le*	at nele?
#ntwoc0	at isa? port 0x300 irq 5 iomem 0xc8000 flags 1	# Riscom/N2 sync serial
bicc0	at isa? port 0x320 irq 10 drq 7		# BICC IsoLan
le*	at bicc?
ne0	at isa? port 0x280 irq 9		# NE[12]000 ethernet cards
ne1	at isa? port 0x300 irq 10
sm0	at isa? port 0x300 irq 10		# SMC91C9x Ethernet
tr0	at isa? port 0xa20 iomem 0xd8000 irq ?  # IBM TROPIC based Token-Ring
tr1	at isa? port 0xa24 iomem 0xd0000 irq ?  # IBM TROPIC based Token-Ring
tr*	at isa? port ? irq ?			# 3COM TROPIC based Token-Ring
we0	at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC Ethernet
we1	at isa? port 0x300 iomem 0xcc000 irq 10

# CardBus network cards
ex*	at cardbus? dev ? function ?	# 3Com 3C575TX
fxp*	at cardbus? dev ? function ?	# Intel i8255x
rtk*	at cardbus? dev ? function ?	# Realtek 8129/8139
tlp*	at cardbus? dev ? function ?	# DECchip 21143

# MII/PHY support
dmphy*	at mii? phy ?			# Davicom DM9101 PHYs
exphy*	at mii? phy ?			# 3Com internal PHYs
icsphy*	at mii? phy ?			# Integrated Circuit Systems ICS1890
inphy*	at mii? phy ?			# Intel 82555 PHYs
iophy*	at mii? phy ?			# Intel 82553 PHYs
lxtphy*	at mii? phy ?			# Level One LXT-970 PHYs
nsphy*	at mii? phy ?			# NS83840 PHYs
nsphyter* at mii? phy ?			# NS83843 PHYs
qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
tlphy*	at mii? phy ?			# ThunderLAN PHYs
tqphy*	at mii? phy ?			# TDK Semiconductor PHYs
ukphy*	at mii? phy ?			# generic unknown PHYs

# USB Controller and Devices

# PCI USB controllers
ohci*	at pci?	dev ? function ?	# Open Host Controller
uhci*	at pci?	dev ? function ?	# Universal Host Controller (Intel)

# CardBus USB controllers
ohci*	at cardbus? dev ? function ?	# Open Host Controller

# USB bus support
usb*	at ohci?
usb*	at uhci?

# USB Hubs
uhub*	at usb?
uhub*	at uhub? port ? configuration ? interface ?

# USB Mice
ums*	at uhub? port ? configuration ? interface ?
wsmouse*	at ums? mux 0

# USB Keyboards
ukbd*	at uhub? port ? configuration ? interface ?
wskbd*	at ukbd? console ? mux 1

# USB Generic HID devices
uhid*	at uhub? port ? configuration ? interface ?

# USB Printer
ulpt*	at uhub? port ? configuration ? interface ?

# USB Modem
umodem*	at uhub? port ? configuration ?
ucom*	at umodem?

# USB Mass Storage
umass*	at uhub? port ? configuration ? interface ?
atapibus* at umass? channel ?
scsibus* at umass? channel ?

# USB audio
uaudio*	at uhub? port ? configuration ?

# USB Ethernet adapters
aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters

# Prolofic PL2301/PL2302 host-to-host adapter
upl*	at uhub? port ?

# Serial adapters
# FTDI FT8U100AX serial adapter
#uftdi*	at uhub? port ?
#ucom*	at uftdi? portno ?

# Diamond Multimedia Rio 500
urio*	at uhub? port ?

# USB Handspring Visor
uvisor*	at uhub? port ?
ucom*	at uvisor?

# USB Generic driver
ugen*	at uhub? port ?

# Audio Devices

# PCI audio devices
auvia*	at pci? dev ? function ?	# VIA VT82C686A integrated AC'97 Audio
clcs*	at pci? dev ? function ?	# Cirrus Logic CS4280
cmpci*	at pci? dev ? function ?	# C-Media CMI8338/8738
eap*	at pci? dev ? function ?	# Ensoniq AudioPCI
eso*	at pci? dev ? function ?	# ESS Solo-1 PCI AudioDrive
fms*	at pci? dev ? function ?	# Forte Media FM801
sv*	at pci? dev ? function ?	# S3 SonicVibes

# ISA Plug-and-Play audio devices
ess*	at isapnp?			# ESS Tech ES1887, ES1888, ES888 audio
guspnp*	at isapnp?			# Gravis Ultra Sound PnP audio
sb*	at isapnp?			# SoundBlaster-compatible audio
wss*	at isapnp?			# Windows Sound System
ym*	at isapnp?			# Yamaha OPL3-SA3 audio

# ISA audio devices
# the "aria" probe might give false hits
#aria0	at isa? port 0x290 irq 10 		# Aria
#ess0	at isa? port 0x220 irq 5 drq 1 drq2 5	# ESS 18XX
gus0	at isa? port 0x220 irq 7 drq 1 drq2 6	# Gravis Ultra Sound
pas0	at isa? port 0x220 irq 7 drq 1		# ProAudio Spectrum
pss0	at isa? port 0x220 irq 7 drq 6  	# Personal Sound System
sp0	at pss0 port 0x530 irq 10 drq 0		# 	sound port driver
sb0	at isa? port 0x220 irq 5 drq 1 drq2 5	# SoundBlaster
wss0	at isa? port 0x530 irq 10 drq 0	drq2 1	# Windows Sound System

#cms0	at isa? port 0x220			# Creative Music System

# OPL[23] FM synthesizers
#opl0	at isa? port 0x388	# use only if not attached to sound card
opl*	at eso?
opl*	at ess?
opl*	at fms?
opl*	at sb?
opl*	at sv?
opl*	at wss?
opl*	at ym?

# Audio support
#audio*	at aria?
audio*	at auvia?
audio*	at clcs?
audio*	at cmpci?
audio*	at eap?
audio*	at eso?
audio*	at ess?
audio*	at fms?
audio*	at gus?
audio*	at guspnp?
audio*	at pas?
audio*	at sb?
audio*	at sp?
audio*	at sv?
audio*	at uaudio?
audio*	at wss?
audio*	at ym?

# MPU 401 UARTs
#mpu*	at isa? port 0x330 irq 9        # MPU401 or compatible card
mpu*	at eso?
mpu*	at fms?
mpu*	at sb?
mpu*	at ym?

# MIDI support
#midi*	at cms?			# Creative Music System
midi*	at eap?			# 137[01] MIDI port
midi*	at mpu?			# MPU 401
midi*	at opl?			# OPL FM synth
midi*	at pcppi?		# MIDI interface to the PC speaker
midi*	at sb?			# SB1 MIDI port

# The spkr driver provides a simple tone interface to the built in speaker.
#spkr0	at pcppi?		# PC speaker

# TV cards

# Brooktree 848/849/878/879 based TV cards
bktr* at pci? dev ? function ?

# Mice

# ISA busmice
lms0	at isa? port 0x23c irq 5	# Logitech bus mouse
lms1	at isa? port 0x238 irq 5
mms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
mms1	at isa? port 0x238 irq 5
wsmouse*	at lms? mux 0
wsmouse*	at mms? mux 0
# backwards compatible versions
#olms0	at isa? port 0x23c irq 5	# Logitech bus mouse
#olms1	at isa? port 0x238 irq 5
#omms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
#omms1	at isa? port 0x238 irq 5
#opms0	at pc? irq 12		# PS/2 auxiliary port mouse
#opms0	at vt? irq 12		# PS/2 auxiliary port mouse


# Joysticks

# ISA Plug-and-Play joysticks
joy*	at isapnp?			# Game ports (usually on audio cards)

# PCI joysticks
joy*	at pci?				# Game ports (usually on audio cards)

# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0	at isa? port 0x201


# Miscellaneous Devices

# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1


# Pull in optional local configuration
include	"arch/i386/conf/GENERIC.local"


# Pseudo-Devices

# disk/mass storage pseudo-devices
pseudo-device	ccd		4	# concatenated/striped disk devices
#pseudo-device	raid		4	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	vnd		4	# disk-like interface to files

# network pseudo-devices
pseudo-device	bpfilter	8	# Berkeley packet filter
#pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback
#pseudo-device	ppp		2	# Point-to-Point Protocol
#pseudo-device	sl		2	# Serial Line IP
#pseudo-device	strip		2	# Starmode Radio IP (Metricom)
#pseudo-device	tun		2	# network tunneling over tty
#pseudo-device	gre		2	# generic L3 over IP tunnel
#pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
#pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation

# miscellaneous pseudo-devices
pseudo-device	pty		64	# pseudo-terminals
pseudo-device	tb		1	# tablet line discipline
pseudo-device	sequencer	1	# MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well (BROKEN)

# a pseudo device needed for Coda	# also needs CODA (above)
#pseudo-device	vcoda		4	# coda minicache <-> venus comm.

# mouse & keyboard multiplexor pseudo-devices
pseudo-device	wsmux		2

	dmesg output:

NetBSD 1.4ZA (BRICK) #3: Sun Jun  4 22:32:37 PDT 2000
    cgd@brick.int.demetriou.com:/a/users/cgd/src-current/sys/arch/i386/compile/BRICK
cpu0: family 5 model 2 step c
cpu0: Intel Pentium (P54C) (586-class)
total memory = 48768 KB
avail memory = 41176 KB
using 635 buffers containing 2540 KB of memory
biostramp installed @ 1000
BIOS32 rev. 0 found at 0xfd8f0
PCI BIOS rev. 2.1 found at 0xfd930
pcibios: config mechanism [1][x], special cycles [1][x], last bus 6
PCI BIOS has 2 Interrupt Routing table entries
PCI Exclusive IRQs: 11
PIR Entry 0:
	Bus: 0  Device: 3
		INTA: link 0x01 bitmap 0xdef8
		INTB: link 0x00 bitmap 0x0000
		INTC: link 0x00 bitmap 0x0000
		INTD: link 0x00 bitmap 0x0000
PIR Entry 1:
	Bus: 0  Device: 4
		INTA: link 0x01 bitmap 0xdef8
		INTB: link 0x02 bitmap 0xdef8
		INTC: link 0x03 bitmap 0xdef8
		INTD: link 0x04 bitmap 0xdef8
pciintr_link_fixup: PIRQ 0 already connected to IRQ 11
pciintr_link_fixup: PIRQ 1 already connected to IRQ 11
pciintr_link_fixup: PIRQ 2 not connected
pciintr_link_fixup: PIRQ 3 not connected
pciintr_link_fixup: assigning IRQ 11 to PIRQ 2
pciintr_link_fixup: assigning IRQ 11 to PIRQ 3
--------------------------------------------
  device vendor product pin PIRQ   IRQ stage
--------------------------------------------
000:03:0 0x1023 0x9660  A   0x00   11  0
--------------------------------------------
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI bus #2 is the last bus
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: PCI configuration registers:
  Common header:
    0x00: 0x12358086 0x22000006 0x06000002 0x00002000

    Vendor Name: Intel (0x8086)
    Device Name: 82437MX Mobile System Controller (MTSC) (0x1235)
    Command register: 0x0006
      I/O space accesses: off
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x2200
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: on
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: host (0x00)
    Interface: 0x00
    Revision ID: 0x02
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x20
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000000

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x00 (none)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00410048 0x00000000 0x0055502a 0x00000000
    0x60: 0x0c0c0402 0x00000000 0x0000000f 0x00000000
    0x70: 0x000a0000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x0000f000

    Don't know how to pretty-print device-dependent header.

Intel 82437MX Mobile System Controller (MTSC) (host bridge, revision 0x02) at ? dev 0 function 0 (tag 0x80000000, intrtag 0x80000000, intrswiz 0, intrpin 0, i/o off, mem on, no quirks)
pchb0: Intel 82437MX Mobile System Controller (MTSC) (rev. 0x02)
pcib0 at pci0 dev 1 function 0: PCI configuration registers:
  Common header:
    0x00: 0x122e8086 0x02800007 0x06010002 0x00000000

    Vendor Name: Intel (0x8086)
    Device Name: 82371FB PCI-to-ISA Bridge (PIIX) (0x122e)
    Command register: 0x0007
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: ISA (0x01)
    Interface: 0x00
    Revision ID: 0x02
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000000

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x00 (none)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00200080
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x0b0b0b0b 0x00000000 0x0000fa00 0x00000000
    0x70: 0x00008080 0x04040000 0x000015e0 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00c00009 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000f10 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82371FB PCI-to-ISA Bridge (PIIX) (ISA bridge, revision 0x02) at ? dev 1 function 0 (tag 0x80000800, intrtag 0x80000800, intrswiz 0, intrpin 0, i/o on, mem on, quirks 1<multifn>)
pcib0: Intel 82371FB PCI-to-ISA Bridge (PIIX) (rev. 0x02)
pciide0 at pci0 dev 1 function 1: PCI configuration registers:
  Common header:
    0x00: 0x12308086 0x02800005 0x01018002 0x00002000

    Vendor Name: Intel (0x8086)
    Device Name: 82371FB IDE controller (PIIX) (0x1230)
    Command register: 0x0005
      I/O space accesses: on
      Memory space accesses: off
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: mass storage (0x01)
    Subclass Name: IDE (0x01)
    Interface: 0x80
    Revision ID: 0x02
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x20
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x00000000 0x00000000 0x00000000 0x00000000
    0x20: 0x0000fcf1 0x00000000 0x00000000 0x00000000
    0x30: 0x00000000 0x00000000 0x00000000 0x00000000

    Base address register at 0x10
      not implemented(?)
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      type: i/o
      base: 0x0000fcf0, size: 0x00000010
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x00 (none)
    Interrupt line: 0x00

  Device-dependent header:
    0x40: 0x0000a307 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000f10 0x00000000

    Don't know how to pretty-print device-dependent header.

Intel 82371FB IDE controller (PIIX) (IDE mass storage, interface 0x80, revision 0x02) at ? dev 1 function 1 (tag 0x80000900, intrtag 0x80000900, intrswiz 0, intrpin 0, i/o on, mem off, no quirks): Intel 82371FB IDE controller (PIIX) (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DCRA-22110>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 2016 MB, 4096 cyl, 16 head, 63 sec, 512 bytes/sect x 4128768 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
cbb0 at pci0 dev 2 function 0: PCI configuration registers:
  Common header:
    0x00: 0xac12104c 0x02000007 0x06070004 0x0082a808

    Vendor Name: Texas Instruments (0x104c)
    Device Name: PCI1130 PCI-CardBus Bridge (0xac12)
    Command register: 0x0007
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0200
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: CardBus (0x07)
    Interface: 0x00
    Revision ID: 0x04
    BIST: 0x00
    Header Type: 0x02+multifunction (0x82)
    Latency Timer: 0xa8
    Cache Line Size: 0x08

  Type 2 (PCI-CardBus bridge) header:
    0x10: 0x10811000 0x02000000 0xb0010100 0xfffff000
    0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
    0x30: 0x00000000 0xfffffffc 0x00000000 0x004001ff
    0x40: 0x00000000 0x000003e1

    Base address register at 0x10 (CardBus socket/ExCA registers)
      type: 32-bit nonprefetchable memory
      base: 0x10811000, size: 0x00001000
    Reserved @ 0x14: 0x0000
    Secondary status register: 0x0200
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detection: off
      DEVSEL timing: medium (0x1)
      PCI target aborts terminate CardBus bus master transactions: off
      CardBus target aborts terminate PCI bus master transactions: off
      Bus initiator aborts terminate initiator transactions: off
      System error: off
      Parity error: off
    PCI bus number: 0x00
    CardBus bus number: 0x01
    Subordinate bus number: 0x01
    CardBus latency timer: 0xb0
    CardBus memory region 0:
      base register:  0xfffff000
      limit register: 0x00000000
    CardBus memory region 1:
      base register:  0xfffff000
      limit register: 0x00000000
    CardBus I/O region 0:
      base register:  0xfffffffc
      limit register: 0x00000000
    CardBus I/O region 1:
      base register:  0xfffffffc
      limit register: 0x00000000
    Interrupt line: 0xff
    Interrupt pin: 0x01 (pin A)
    Bridge control register: 0x0040
      Parity error response: off
      CardBus SERR forwarding: off
      ISA enable: off
      VGA enable: off
      CardBus master abort reporting: off
      CardBus reset: on
      Functional interrupts routed by ExCA registers: off
      Memory window 0 prefetchable: off
      Memory window 1 prefetchable: off
      Write posting enable: off
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Base address register at 0x44 (legacy-mode registers)
      type: i/o
      base: 0x000003e0, size: 0x00000004

  Device-dependent header:
    0x48: 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00001020 0x00000000 0x00000000 0x00000000
    0x90: 0x00728300 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Texas Instruments PCI1130 PCI-CardBus Bridge (CardBus bridge, revision 0x04) at ? dev 2 function 0 (tag 0x80001000, intrtag 0x80001000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb0: NOT USED because of unconfigured interrupt
cbb1 at pci0 dev 2 function 1: PCI configuration registers:
  Common header:
    0x00: 0xac12104c 0x02000007 0x06070004 0x0082a808

    Vendor Name: Texas Instruments (0x104c)
    Device Name: PCI1130 PCI-CardBus Bridge (0xac12)
    Command register: 0x0007
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0200
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: bridge (0x06)
    Subclass Name: CardBus (0x07)
    Interface: 0x00
    Revision ID: 0x04
    BIST: 0x00
    Header Type: 0x02+multifunction (0x82)
    Latency Timer: 0xa8
    Cache Line Size: 0x08

  Type 2 (PCI-CardBus bridge) header:
    0x10: 0x10810000 0x02000000 0xb0020200 0xfffff000
    0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
    0x30: 0x00000000 0xfffffffc 0x00000000 0x004002ff
    0x40: 0x00000000 0x000003e1

    Base address register at 0x10 (CardBus socket/ExCA registers)
      type: 32-bit nonprefetchable memory
      base: 0x10810000, size: 0x00001000
    Reserved @ 0x14: 0x0000
    Secondary status register: 0x0200
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detection: off
      DEVSEL timing: medium (0x1)
      PCI target aborts terminate CardBus bus master transactions: off
      CardBus target aborts terminate PCI bus master transactions: off
      Bus initiator aborts terminate initiator transactions: off
      System error: off
      Parity error: off
    PCI bus number: 0x00
    CardBus bus number: 0x02
    Subordinate bus number: 0x02
    CardBus latency timer: 0xb0
    CardBus memory region 0:
      base register:  0xfffff000
      limit register: 0x00000000
    CardBus memory region 1:
      base register:  0xfffff000
      limit register: 0x00000000
    CardBus I/O region 0:
      base register:  0xfffffffc
      limit register: 0x00000000
    CardBus I/O region 1:
      base register:  0xfffffffc
      limit register: 0x00000000
    Interrupt line: 0xff
    Interrupt pin: 0x02 (pin B)
    Bridge control register: 0x0040
      Parity error response: off
      CardBus SERR forwarding: off
      ISA enable: off
      VGA enable: off
      CardBus master abort reporting: off
      CardBus reset: on
      Functional interrupts routed by ExCA registers: off
      Memory window 0 prefetchable: off
      Memory window 1 prefetchable: off
      Write posting enable: off
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Base address register at 0x44 (legacy-mode registers)
      type: i/o
      base: 0x000003e0, size: 0x00000004

  Device-dependent header:
    0x48: 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00001020 0x00000000 0x00000000 0x00000000
    0x90: 0x00728200 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Texas Instruments PCI1130 PCI-CardBus Bridge (CardBus bridge, revision 0x04) at ? dev 2 function 1 (tag 0x80001100, intrtag 0x80001100, intrswiz 0, intrpin 0x2, i/o on, mem on, no quirks): Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb1: NOT USED because of unconfigured interrupt
vga1 at pci0 dev 3 function 0: PCI configuration registers:
  Common header:
    0x00: 0x96601023 0x02800003 0x030000d3 0x00000000

    Vendor Name: Trident Microsystems (0x1023)
    Device Name: TGUI 9660 (0x9660)
    Command register: 0x0003
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: off
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0280
      Capability List support: off
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: display (0x03)
    Subclass Name: VGA (0x00)
    Interface: 0x00
    Revision ID: 0xd3
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x08000000 0x08400000 0x08800000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00000000
    0x30: 0x000c0001 0x00000000 0x00000000 0x0000010b

    Base address register at 0x10
      type: 32-bit nonprefetchable memory
      base: 0x08000000, size: 0x00400000
    Base address register at 0x14
      type: 32-bit nonprefetchable memory
      base: 0x08400000, size: 0x00010000
    Base address register at 0x18
      type: 32-bit nonprefetchable memory
      base: 0x08800000, size: 0x00400000
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x0000
    Subsystem ID: 0x0000
    Expansion ROM Base Address: 0x000c0001
    Reserved @ 0x34: 0x00000000
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x0b

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

Trident Microsystems TGUI 9660 (VGA display, revision 0xd3) at ? dev 3 function 0 (tag 0x80001800, intrtag 0x80001800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): Trident Microsystems TGUI 9660 (rev. 0xd3)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsiprobe: intellimode -> 6
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
lpt2 at isa0 port 0x3bc-0x3bf: polled
seaprobe: board type unknown at address 0xc8000
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has no sockets
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
apm: 2 batteries, global standby, global suspend, rtimer suspend, internal standby, pccard standby
biomask efcd netmask efcd ttymask ffcf
pcic0: controller 0 detecting irqs with mask 0xdeb8:..3..7..9..10
pcic0: using irq 3 for socket events
pcmcia0: CIS checksum failed
Digital, RoamAbout/DS, Version 2.00, WaveLAN/PCMCIA (manufacturer 0x0156, product 0x0101) function 0 not configured
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying nfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11

>Fix:
	unknown.
>Release-Note:
>Audit-Trail:
>Unformatted: