On Wed, 8 Jul 1998, Matthew Jacob wrote:

> 
> No, no, no, no.... this printout is breakage I fixed a while back
> that I'll have to fix. The panic has nothing to do with that.
> 
> 
> On Wed, 8 Jul 1998, Jason Thorpe wrote:
> 
> > On Wed, 8 Jul 1998 15:02:14 -0700 (PDT) 
> >  Matthew Jacob <mjacob@nas.nasa.gov> wrote:
> > 
> >  > NetBSD 1.3F (GENERIC) #1: Tue Jun 30 16:58:17 PDT 1998
> >  >     ross@zeta.teraflop.com:/usr/src/sys/arch/alpha/compile/GENERIC
> >  > AlphaServer 8200 Model EV56/440, 436MHz
> >  > 8192 byte page size, 2 processors.
> >  > real mem = 18446744071562067968 (2629632 reserved for PROM, 2144854016 used by NetBSD)
> > 
> > So, we have big machines, but not THAT BIG... "Seems wrong to me.  I suggest
> > you start there."
> > 
> >  > avail mem = 1878614016
> >  > using 26182 buffers containing 214482944 bytes of memory
> > 

Here's the same machine with the real mem message fixed:


[ preserving 577056 bytes of netbsd symbol table ]
consinit: using prom console
Copyright (c) 1996, 1997, 1998
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3F (ALPHA) #1: Wed Jul  8 17:32:30 PDT 1998
    mjacob@mathom.nas.nasa.gov:/space/NetBSD-current/src/sys/arch/alpha/compile/ALPHA
AlphaServer 8200 Model EV56/440, 436MHz
8192 byte page size, 2 processors.
real mem = 2147483648 (2629632 reserved for PROM, 2144854016 used by NetBSD)
avail mem = 1877057536
using 26182 buffers containing 214482944 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 8 (primary), 21164A (pass 2)
cpu0: VAX FP support, IEEE FP support, Primary Eligible
cpu1 at mainbus0: ID 9, 21164A (pass 2)
cpu1: VAX FP support, IEEE FP support
tlsb0 at mainbus0
tlsb0 node 4: Dual CPU, 4MB cache, VID 8 -> cpu
gbus0 at tlsb0 node 4: Dual CPU, 4MB cache
zsc at gbus0 offset 0x10000000 not configured
zsc at gbus0 offset 0x11000000 not configured
mcclock0 at gbus0 offset 0x20000000: mc146818 or compatible
tlsbmem0 at tlsb0 node 5: MS7CC Memory Module
kft0 at tlsb0 node 8: KFTIA I/O interface
dwlpx0 at kft0 hose 0: PCIA rev. 0, STD I/O not present, 32K S/G entries
pci0 at dwlpx0 bus 0
pci0: i/o enabled, memory enabled
isp0 at pci0 dev 0 function 0
isp0: Board Revision 1020, loaded F/W Revision 2.10
isp0: Differential Mode
isp0: interrupting at kn8ae irq 14 vector 0x8400 PCI Interrupt Pin A
scsibus0 at isp0: 16 targets
isp1 at pci0 dev 1 function 0
isp1: Board Revision 1020, loaded F/W Revision 2.10
isp1: Differential Mode
isp1: interrupting at kn8ae irq 14 vector 0x8401 PCI Interrupt Pin A
scsibus1 at isp1: 16 targets
de0 at pci0 dev 2 function 0
de0: interrupting at kn8ae irq 14 vector 0x8402 PCI Interrupt Pin A
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:23:17:c6
de0: enabling 10baseT port
fpa0 at pci0 dev 3 function 0: DEC DEFPA PCI FDDI SAS Controller
fpa0: FDDI address 08:00:2b:b9:f7:5b, FW=3.10, HW=1, SMT V7.2
fpa0: FDDI Port = S (PMD = ANSI Multi-Mode)
fpa0: interrupting at kn8ae irq 14 vector 0x8403 PCI Interrupt Pin A
isp2 at pci0 dev 4 function 0
isp2: Board Revision 1020, loaded F/W Revision 2.10
isp2: Differential Mode
isp2: interrupting at kn8ae irq 14 vector 0x8404 PCI Interrupt Pin A
scsibus2 at isp2: 16 targets
st0 at scsibus2 targ 4 lun 0: <STK, SD-3, 0301> SCSI2 1/sequential removable
st0: rogue, drive empty
st1 at scsibus2 targ 5 lun 0: <STK, SD-3, 0301> SCSI2 1/sequential removable
st1: rogue, drive empty
isp3 at pci0 dev 5 function 0
isp3: Board Revision 1020, loaded F/W Revision 2.10
isp3: Differential Mode
isp3: interrupting at kn8ae irq 14 vector 0x8405 PCI Interrupt Pin A
scsibus3 at isp3: 16 targets
sd0 at scsibus3 targ 0 lun 0: <DEC, RZ28D    (C) DEC, 0008> SCSI2 0/direct fixed
sd0: 2007MB, 3045 cyl, 16 head, 84 sec, 512 bytes/sect x 4110480 sectors
sd1 at scsibus3 targ 1 lun 0: <DEC, RZ29B    (C) DEC, 0016> SCSI2 0/direct fixed
sd1: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd2 at scsibus3 targ 2 lun 0: <DEC, RZ29B    (C) DEC, 0016> SCSI2 0/direct fixed
sd2: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd3 at scsibus3 targ 3 lun 0: <DEC, RZ29B    (C) DEC, 0016> SCSI2 0/direct fixed
sd3: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
cd0 at scsibus3 targ 4 lun 0: <DEC, RRD45   (C) DEC, 0436> SCSI2 5/cdrom removable
de1 at pci0 dev 6 function 0
de1: interrupting at kn8ae irq 14 vector 0x8406 PCI Interrupt Pin A
de1: DEC 21040 [10Mb/s] pass 2.4
de1: address 00:00:f8:23:17:c2
de1: enabling 10baseT port
kft1 at tlsb0 node 7: KFTHA I/O interface
dwlpx1 at kft1 hose 2: PCIA rev. 1, STD I/O not present, 32K S/G entries
pci1 at dwlpx1 bus 0
pci1: i/o enabled, memory enabled
de2 at pci1 dev 0 function 0
de2: interrupting at kn8ae irq 14 vector 0x8320 PCI Interrupt Pin A
de2: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de2: address 00:00:c0:3c:a4:ef
de2: enabling 100baseTX port
esh0 at pci1 dev 4 function 0: RoadRunner HIPPI
esh0: interrupting at kn8ae irq 14 vector 0x8324 PCI Interrupt Pin A
dwlpx2 at kft1 hose 3: PCIA rev. 1, STD I/O not present, 32K S/G entries
pci2 at dwlpx2 bus 0
pci2: i/o enabled, memory enabled
esh1 at pci2 dev 0 function 0: RoadRunner HIPPI
esh1: interrupting at kn8ae irq 14 vector 0x8330 PCI Interrupt Pin A
esh2 at pci2 dev 4 function 0: RoadRunner HIPPI
esh2: interrupting at kn8ae irq 14 vector 0x8334 PCI Interrupt Pin A
kft2 at tlsb0 node 6: KFTHA I/O interface
dwlpx0: node 8 hose 0 error interrupt
	HPC 0: ERR=0x0000c001; DMA read from Memory, Failing Address 0x0
	       Illegal CSR Address Error
	       Nonexistent PCI Address Error
root on sd2a dumps on sd2b
de2: enabling Full Duplex 100baseTX port
mountroot: trying nfs...
mountroot: trying ext2fs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ffs...
root file system type: ffs
uvm_swap: allocated 256 swap buffer headers
init: copying out path `/sbin/init' 11
de0: link down: cable problem?
de1: link down: cable problem?
de2: link down: cable problem?
fpa0: Link Unavailable
fpa0: Link Available