I just put this system together on a test bench.

  I have a second CPU sitting on the shelf if someone wants me to test
anything. The machine will receive the following additional hardware:
	-> SysKonnect 2-port Gigabit ethernet (FreeBSD driver)
	-> 4-port Quartet64 (DuraLan) [Jason has driver]

  The machine is on a test bench, serial console, etc. I'm happy to test
things if anyone wants things tested.

  We also have some Alteon (netgear) Gigabit ethernet cards that can be put
in the machine. No driver for any *BSD afaik. The motherboard has Ultra2
SCSI on it, but I don't have any drives, so I disabled it in the
BIOS. AIC7891 with 3960 Ultra2->Narrow behind it.
  The LAN is on the motherboard as well. 
  Temperature sensors, etc. if someone has apm patches to fetch that.
  Hmm.. I guess I turned power management off in the bios.

  The following: 
pchb0 at pci0 dev 24 function 0
pchb0: PC Technology product 0x3030 (rev. 0x02)
pchb1 at pci0 dev 25 function 0
pchb1: PC Technology product 0x3030 (rev. 0x02)

  is the Micron 64-bit host adapters. I will add something to pcidevs.

NetBSD 1.4 (GENERIC) #0: Fri May  7 12:27:31 PDT 1999
    perry@cynic.cynic.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: family 6 model 7 step 3
cpu0: Intel Pentium III (686-class)
real mem  = 66650112
avail mem = 58298368
using 839 buffers containing 3436544 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o enabled, memory enabled
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPD3043AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 4125MB, 8940 cyl, 15 head, 63 sec, 512 bytes/sect x 8448300 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4, Ultra-DMA mode 3, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-6002B, 8100309746, 0527> type 5 cdrom removable
cd0: 32-bits data port
cd0: drive supports PIO mode 3, DMA mode 1
pciide0: secondary channel interrupting at irq 15
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:1:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
uhci0: USB version 1.0
usb0 at uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 14 function 0: Intel EtherExpress Pro 10+/100B Ethernet
fxp0: interrupting at irq 9
fxp0: Ethernet address 00:a0:75:00:0c:09
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 17 function 0: ATI Technologies product 0x4756 (rev. 0x3a)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0
pchb0: PC Technology product 0x3030 (rev. 0x02)
pchb1 at pci0 dev 25 function 0
pchb1: PC Technology product 0x3030 (rev. 0x02)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
opms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask c840 netmask ca40 ttymask da42
wscons: wskbd0 glued to wsdisplay0 (console)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs