Spurious acpi lid open/close behaviour on 11.99.6

To: "NetBSD-current Users's Discussion List" <current-users%netbsd.org@localhost>
Subject: Spurious acpi lid open/close behaviour on 11.99.6
From: David Brownlee <abs%absd.org@localhost>
Date: Fri, 3 Jul 2026 17:03:28 +0100
I thought I'd give a -current kernel & modules a quick test on my old
ThinkPad T14-G1 (previously running 11-RC5). Userland and packages
unchanged, just updated bootx64.efi, kernel & modules)

Everything pretty much works, except for a slow sequence of spurious
acpilid0: lid opened/closed events (and a possible hang on first when
x11 started, though that could have been confusion from the lid
open/close events)

Lid open/close has worked fine on this system and I do not believe I
have ever seen spurious events on earlier NetBSD versions (In my
infinite wisdom I had adjusted powerd/scripts/lid_switch to lock X on
lid closed, which provided extra annoyance)

A sequence from a sample boot would be:

% dmesg | rg acpi.\*lid
[     1.054536] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[     8.414846] acpilid0: lid opened.
[     9.024846] acpilid0: lid closed.
[    13.164846] acpilid0: lid opened.
[   103.734846] acpilid0: lid closed.
[   104.134846] acpilid0: lid opened.
[   145.474846] acpilid0: lid closed.
[   147.124846] acpilid0: lid opened.
[   148.104846] acpilid0: lid closed.
[   149.494846] acpilid0: lid opened.

Has anyone else seen similar - or have any ideas?

dmesg.boot below

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024, 2025, 2026
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 11.99.6 (GENERIC) #0: Thu Jul  2 17:56:49 UTC 2026
    mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 48777 MB
avail memory = 47156 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa 8cbba018
mainbus0 (root)
ACPI: RSDP 0x000000008FC4E014 000024 (v02 LENOVO)
ACPI: XSDT 0x000000008FC4C188 000104 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: FACP 0x000000008C575000 000114 (v06 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: DSDT 0x000000008C544000 02C5BD (v02 LENOVO CML      20170001
INTL 20160422)
ACPI: FACS 0x000000008F97B000 000040
ACPI: SSDT 0x000000008CABC000 0020AE (v02 LENOVO CpuSsdt  00003000
INTL 20160527)
ACPI: SSDT 0x000000008CABB000 0005A1 (v02 LENOVO CtdpB    00001000
INTL 20160527)
ACPI: SSDT 0x000000008CA7E000 003532 (v02 LENOVO DptfTabl 00001000
INTL 20160527)
ACPI: SSDT 0x000000008C57D000 00331E (v02 LENOVO SaSsdt   00003000
INTL 20160527)
ACPI: SSDT 0x000000008C57C000 00060E (v02 LENOVO Tpm2Tabl 00001000
INTL 20160527)
ACPI: TPM2 0x000000008C57B000 000034 (v04 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: BOOT 0x000000008C579000 000028 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: HPET 0x000000008C574000 000038 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: APIC 0x000000008C573000 000164 (v04 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: MCFG 0x000000008C572000 00003C (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: ECDT 0x000000008C571000 000053 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: SSDT 0x000000008C542000 001F15 (v02 LENOVO WHL_Tbt_ 00001000
INTL 20160527)
ACPI: SSDT 0x000000008C541000 0000A6 (v02 LENOVO PID0Ssdt 00000010
INTL 20160527)
ACPI: SSDT 0x000000008C53D000 003AD0 (v02 LENOVO ProjSsdt 00000010
INTL 20160527)
ACPI: NHLT 0x000000008C53B000 00189E (v00 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: MSDM 0x000000008C53A000 000055 (v03 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: SSDT 0x000000008C35D000 000FCE (v02 LENOVO UsbCTabl 00001000
INTL 20160527)
ACPI: LPIT 0x000000008C35C000 000094 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: WSMT 0x000000008C35B000 000028 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: SSDT 0x000000008C358000 00281B (v02 LENOVO TbtTypeC 00000000
INTL 20160527)
ACPI: DBGP 0x000000008C357000 000034 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: DBG2 0x000000008C356000 000054 (v00 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: BATB 0x000000008C355000 00004A (v02 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: DMAR 0x000000008AB4F000 0000C8 (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: ASF! 0x000000008AB4D000 0000A0 (v32 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: UEFI 0x000000008F930000 00012A (v01 LENOVO TP-N2X   00001350
PTEC 00000002)
ACPI: FPDT 0x000000008AB4C000 000034 (v01 LENOVO TP-N2X   00001350
PTEC 00001350)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: CPU base freq 2300000000 Hz
cpu0: CPU max freq 4900000000 Hz
cpu0: TSC freq CPUID 2304000000 Hz
cpu0: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu1: node 0, package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu2: node 0, package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu3: node 0, package 0, core 3, smt 0
cpu4 at mainbus0 apid 1
cpu4: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu4: node 0, package 0, core 0, smt 1
cpu5 at mainbus0 apid 3
cpu5: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu5: node 0, package 0, core 1, smt 1
cpu6 at mainbus0 apid 5
cpu6: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu6: node 0, package 0, core 2, smt 1
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Core(TM) i7-10610U CPU @ 1.80GHz, id 0x806ec
cpu7: node 0, package 0, core 3, smt 1
acpi0 at mainbus0: Intel ACPICA 20260408
acpi0: X/RSDT: OemId <LENOVO,TP-N2X  ,00001350>, AslId <PTEC,00000002>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
mpacpi: PCI bus 4 int routing already done!
acpi0: MCFG: segment 0, bus 0-127, address 0x00000000f0000000
MPACPI PCI bus number 2 configuration failed: 6
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA480922B6008 000400 (v02 PmRef  Cpu0Cst  00003001
INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA480922B6808 00061E (v02 PmRef  Cpu0Ist  00003000
INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA480920A54C8 0000FC (v02 PmRef  Cpu0Psd  00003000
INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA48092289808 000778 (v02 PmRef  ApIst    00003000
INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA4809227F008 000D22 (v02 PmRef  ApPsd    00003000
INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA48B81BE2B48 0003CA (v02 PmRef  ApCst    00003000
INTL 20160527)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
PEPD (INT33A1) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0001): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (IPUA, 0x3480): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0400: Unknown Output Device, head 0
thinkpad0 at acpi0 (HKEY, LEN0268)
thinkpad0: version 0200
thinkpad0: battery control capabilities: 1f
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: ACPI 4.0 functionality present
LSSD (LEN0111) at acpi0 not configured
ITSD (LEN0100) at acpi0 not configured
SEN1 (INT3403) at acpi0 not configured
SEN2 (INT3403) at acpi0 not configured
LHKF (LEN0130) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, LEN0071) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN2068) (aux port): irq 12
igpio0 at acpi0 (GPI0, INT34BB): mem
0xfd6e0000-0xfd6effff,0xfd6d0000-0xfd6dffff,0xfd6a0000-0xfd6affff irq
14
gpio0 at igpio0: 244 pins
acpiwmi0 at acpi0 (WTBT, PNP0C14-TBFP): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
EPC (INT0E0C) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiwmi1 at acpi0 (WFDE, PNP0C14-SampleDev): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
HIDD (INT33D5) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi2 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi2 not configured
acpiwmi3 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
acpiwmibus at acpiwmi3 not configured
acpiwmi4 at acpi0 (WMI3, PNP0C14-3): ACPI WMI Interface
acpiwmibus at acpiwmi4 not configured
acpiwmi5 at acpi0 (WMI4, PNP0C14-4): ACPI WMI Interface
acpiwmibus at acpiwmi5 not configured
acpiwmi6 at acpi0 (WMI5, PNP0C14-5): ACPI WMI Interface
acpiwmibus at acpiwmi6 not configured
acpiwmi7 at acpi0 (WMI6, PNP0C14-6): ACPI WMI Interface
acpiwmibus at acpiwmi7 not configured
ACM (INTC1025) at acpi0 not configured
IETM (INT3400) at acpi0 not configured
tpm0 at acpi0 (TPM, STM0125): mem 0xfed40000-0xfed44fff
tpm0: device 0x0000104a rev 0x4e
UBTC (USBC000) at acpi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 128.0 C, passive cooling
ACPI: Enabled 5 GPEs in block 00 to 7F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 10.32
pms0: Extended W mode, Passthrough, Palm detect, One button click pad,
Multi-finger Report, Multi-finger, Reports max, Reports min
pms0: Probed max coordinates right: 5678, top: 4694
pms0: Probed min coordinates left: 1266, bottom: 1162
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel product 9b61 (rev. 0x0c)
i915drmkms0 at pci0 dev 2 function 0: Intel UHD Graphics (rev. 0x02)
Intel Core 6G Thermal (miscellaneous DASP, revision 0x0c) at pci0 dev
4 function 0 not configured
Intel Core 6G Gaussian Mixture Model (miscellaneous system) at pci0
dev 8 function 0 not configured
pchtemp0 at pci0 dev 18 function 0: Intel PCH Temperature Sensor
xhci0 at pci0 dev 20 function 0: Intel Comet Lake USB 3.2 Gen 2x1 xHCI
(rev. 0x00)
xhci0: 64-bit DMA
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.10
usb0 at xhci0: USB revision 3.1
usb1 at xhci0: USB revision 2.0
Intel Comet Lake Shared SRAM (RAM memory) at pci0 dev 20 function 2
not configured
Intel Comet Lake CNVi WiFi (miscellaneous network) at pci0 dev 20
function 3 not configured
Intel Comet Lake MEI 1 (miscellaneous communications) at pci0 dev 22
function 0 not configured
ppb0 at pci0 dev 28 function 0: Intel Comet Lake PCIe Root Port 1 (rev. 0xf0)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root
Complex> x1 @ 8.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
rtsx0 at pci1 dev 0 function 0: Realtek Semiconductor RTS522A PCI-E
Card Reader (rev. 0x01)
rtsx0: interrupting at msi1 vec 0
sdmmc0 at rtsx0
ppb1 at pci0 dev 28 function 4: Intel Comet Lake PCIe Root Port 5 (rev. 0xf0)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root
Complex> x2 @ 8.0GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 0 function 0: Intel product 15c0 (rev. 0x01)
ppb2: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
ppb3 at pci3 dev 0 function 0: Intel product 15c0 (rev. 0x01)
ppb3: PCI Express capability version 2 <Downstream Port of PCI-E
Switch> x4 @ 2.5GT/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled
Intel product 15bf (miscellaneous system, revision 0x01) at pci4 dev 0
function 0 not configured
ppb4 at pci3 dev 1 function 0: Intel product 15c0 (rev. 0x01)
ppb4: PCI Express capability version 2 <Downstream Port of PCI-E
Switch> x4 @ 2.5GT/s
pci5 at ppb4 bus 6
pci5: i/o space, memory space enabled
ppb5 at pci3 dev 2 function 0: Intel product 15c0 (rev. 0x01)
ppb5: PCI Express capability version 2 <Downstream Port of PCI-E
Switch> x4 @ 2.5GT/s
pci6 at ppb5 bus 43
pci6: i/o space, memory space enabled
xhci1 at pci6 dev 0 function 0: Intel product 15c1 (rev. 0x01)
xhci1: 64-bit DMA
xhci1: interrupting at msi2 vec 0
xhci1: xHCI version 1.10
usb2 at xhci1: USB revision 3.0
usb3 at xhci1: USB revision 2.0
ppb6 at pci0 dev 29 function 0: Intel Comet Lake PCIe Root Port 9 (rev. 0xf0)
ppb6: PCI Express capability version 2 <Root Port of PCI-E Root
Complex> x4 @ 8.0GT/s
pci7 at ppb6 bus 45
pci7: i/o space, memory space enabled
ppb7 at pci0 dev 29 function 4: Intel Comet Lake PCIe Root Port 13 (rev. 0xf0)
ppb7: PCI Express capability version 2 <Root Port of PCI-E Root
Complex> x4 @ 8.0GT/s
pci8 at ppb7 bus 46
pci8: i/o space, memory space enabled
nvme0 at pci8 dev 0 function 0: Samsung Electronics (3rd vendor ID)
SM981 M.2 NVMe SSD (rev. 0x00)
nvme0: NVMe 1.2
nvme0: for admin queue interrupting at msix3 vec 0
nvme0: SAMSUNG MZVLB512HAJQ-000L7, firmware 5L2QEXA7, serial S3TNNF0K809474
nvme0: for io queue 1 interrupting at msix3 vec 1 affinity to cpu0
nvme0: for io queue 2 interrupting at msix3 vec 2 affinity to cpu1
nvme0: for io queue 3 interrupting at msix3 vec 3 affinity to cpu2
nvme0: for io queue 4 interrupting at msix3 vec 4 affinity to cpu3
nvme0: for io queue 5 interrupting at msix3 vec 5 affinity to cpu4
nvme0: for io queue 6 interrupting at msix3 vec 6 affinity to cpu5
nvme0: for io queue 7 interrupting at msix3 vec 7 affinity to cpu6
nvme0: for io queue 8 interrupting at msix3 vec 8 affinity to cpu7
ld0 at nvme0 nsid 1
ld0: 476 GB, 62260 cyl, 255 head, 63 sec, 512 bytes/sect x 1000215216 sectors
pcib0 at pci0 dev 31 function 0: Intel Comet Lake U (Premium) LPC or
eSPI (rev. 0x00)
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi4 vec 0
hdaudio0: HDA ver. 0.0, OSS 0, ISS 0, BSS 0, SDO 1
hdaudio0: autoconfiguration error: no codecs found
hdaudio0: autoconfiguration error: device driver failed to attach
ichsmb0 at pci0 dev 31 function 4: Intel Comet Lake SMBus (rev. 0x00)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
Intel Comet Lake SPI (FLASH) (miscellaneous serial bus) at pci0 dev 31
function 5 not configured
wm0 at pci0 dev 31 function 6, 64-bit DMA: I219 LM (10) Ethernet
Connection (rev. 0x00)
wm0: interrupting at msi4 vec 0
wm0: PCI-Express bus
wm0: 4096 words FLASH, version 0.5.4
wm0: RX packet buffer size: 26KB
wm0: Ethernet address 38:f3:ab:be:d1:0e
wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat 151 us, pow   200 mW
acpicpu0: C3: FFH, lat 1034 us, pow   200 mW
acpicpu0: P0: FFH, lat  10 us, pow 15000 mW, 2301 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 15000 mW, 2300 MHz
acpicpu0: P2: FFH, lat  10 us, pow 14088 mW, 2200 MHz
acpicpu0: P3: FFH, lat  10 us, pow 12462 mW, 2000 MHz
acpicpu0: P4: FFH, lat  10 us, pow 11042 mW, 1800 MHz
acpicpu0: P5: FFH, lat  10 us, pow 10215 mW, 1700 MHz
acpicpu0: P6: FFH, lat  10 us, pow  9542 mW, 1600 MHz
acpicpu0: P7: FFH, lat  10 us, pow  8882 mW, 1500 MHz
acpicpu0: P8: FFH, lat  10 us, pow  7471 mW, 1300 MHz
acpicpu0: P9: FFH, lat  10 us, pow  6855 mW, 1200 MHz
acpicpu0: P10: FFH, lat  10 us, pow  6121 mW, 1100 MHz
acpicpu0: P11: FFH, lat  10 us, pow  4955 mW,  900 MHz
acpicpu0: P12: FFH, lat  10 us, pow  4267 mW,  800 MHz
acpicpu0: P13: FFH, lat  10 us, pow  3718 mW,  700 MHz
acpicpu0: P14: FFH, lat  10 us, pow  2538 mW,  500 MHz
acpicpu0: P15: FFH, lat  10 us, pow  2028 mW,  400 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2304000000 Hz quality 3000
uhub0 at usb0acpiacad0: AC adapter offline.
: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 6 ports with 6 removable, self powered
uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev
2.00/1.00, addr 0
uhub3: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev
2.00/1.00, addr 0
uhub1: 12 ports with 12 removable, self powered
ld0: GPT GUID: 6bab4fd7-8f34-482e-af4f-d4764b31396e
uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev
3.00/1.00, addr 0
uhub2: 2 ports with 2 removable, self powered
dk0 at ld0: "EFI system partition", 532480 blocks at 2048, type: msdos
dk1 at ld0: "Microsoft reserved partition", 32768 blocks at 534528,
type: <unknown>
dk2 at ld0: "Basic data partition", 104857600 blocks at 567296, type: ntfs
dk3 at ld0: "t14-root", 301268992 blocks at 105424896, type: ffs
dk4 at ld0: "t14-swap", 33554432 blocks at 406693888, type: swap
dk5 at ld0: "t14-cgd", 559966863 blocks at 440248320, type: cgd
acpibat0: Celxpert LiP rechargeable battery
acpibat0: granularity: low->warn 0.-01 Wh, warn->full 0.-01 Wh
IPsec: Initialized Security Association Processing.
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Logitech (0x046d) USB Receiver (0xc548), rev 2.00/5.04, addr
1, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: Logitech (0x046d) USB Receiver (0xc548), rev 2.00/5.04, addr
1, iclass 3/1
uhidev1: 11 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 11: input=2, output=0, feature=0
uhidev2 at uhub1 port 2 configuration 1 interface 2
uhidev2: Logitech (0x046d) USB Receiver (0xc548), rev 2.00/5.04, addr
1, iclass 3/0
uhidev2: 17 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhidev3 at uhub1 port 2 configuration 1 interface 3
uhidev3: Logitech (0x046d) USB Receiver (0xc548), rev 2.00/5.04, addr
1, iclass 3/0
uhidev3: 42 report ids
uts0 at uhidev3 reportid 40
uts0: autoconfiguration error: touchscreen has no range report
uhid5 at uhidev3 reportid 41: input=0, output=0, feature=1
uhid6 at uhidev3 reportid 42: input=0, output=0, feature=256
uvideo0 at uhub1 port 8 configuration 1 interface 0: Chicony
Electronics Co.,Ltd. (0x04f2) Integrated Camera (0xb6d0), rev
2.01/59.18, addr 2
video0 at uvideo0: Chicony Electronics Co.,Ltd. (0x04f2) Integrated
Camera (0xb6d0), rev 2.01/59.18, addr 2
video1 at uvideo0: Chicony Electronics Co.,Ltd. (0x04f2) Integrated
Camera (0xb6d0), rev 2.01/59.18, addr 2
uvideo1 at uhub1 port 8 configuration 1 interface 2: Chicony
Electronics Co.,Ltd. (0x04f2) Integrated Camera (0xb6d0), rev
2.01/59.18, addr 2
video2 at uvideo1: Chicony Electronics Co.,Ltd. (0x04f2) Integrated
Camera (0xb6d0), rev 2.01/59.18, addr 2
video3 at uvideo1: Chicony Electronics Co.,Ltd. (0x04f2) Integrated
Camera (0xb6d0), rev 2.01/59.18, addr 2
ubt0 at uhub1 port 10
ubt0: vendor 8087 (0x8087) product 0026 (0x0026), rev 2.01/0.02, addr 3
swwdog0: software watchdog initialized
WARNING: 3 errors while detecting hardware; check system log.
boot device: ld0
root on dk3 dumps on dk4
root file system type: ffs
kern.module.path=/stand/amd64/11.99.6/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi5 vec 0 (i915drmkms0)
i915drmkms0: notice: Failed to load DMC firmware
i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xa0040000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation),
using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
acpilid0: lid opened.
acpilid0: lid closed.
acpilid0: lid opened.
acpibat0: normal capacity on 'charge state'
acpilid0: lid closed.
acpilid0: lid opened.
acpilid0: lid closed.
acpilid0: lid opened.
acpilid0: lid closed.
acpilid0: lid opened.
uhub4 at uhub1 port 5: Terminus Technology (0x1a40) USB 2.0 Hub
(0x0101), class 9/0, rev 2.00/1.11, addr 4
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
acpiacad0: AC adapter online.
uhidev4 at uhub4 port 2 configuration 1 interface 1
uhidev4: Cable Matters Inc (0x04b4) USB-C to Multiport Adapter with
Charging (0xf649), rev 2.01/2.22, addr 5, iclass 3/0
uhidev4: 228 report ids
uhid7 at uhidev4 reportid 224: input=0, output=0, feature=63
uhid8 at uhidev4 reportid 225: input=0, output=7, feature=0
uhid9 at uhidev4 reportid 226: input=0, output=131, feature=0
uhid10 at uhidev4 reportid 227: input=0, output=0, feature=131
uhid11 at uhidev4 reportid 228: input=0, output=0, feature=32
umass0 at uhub4 port 4 configuration 1 interface 0
umass0: CMI (0x0bda) USB 10/100 LAN (0x8151), rev 2.00/20.00, addr 6
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
cd0 at scsibus0 target 0 lun 0: <Realtek, USB CD-ROM, 2.00> cdrom removable
cgd0: GPT GUID: 65f95929-d225-44d8-8c75-d66b6babe4d5
dk6 at cgd0: "t14-home", 559966796 blocks at 34, type: ffs
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
Prev by Date: daily CVS update output
Next by Date: Automated report: NetBSD-current/i386 build failure
Previous by Thread: softints stuck for 16 seconds: stuck in swapping?
Next by Thread: PCI_RESOURCE
Indexes:
Home | Main Index | Thread Index | Old Index