Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Thinkpad X220T digitizer pen stopped no longer works on NetBSD 11.99.1
Hi all,
Has anyone else had an issue where a digitizer pen that worked on
NetBSD 10.x stopped working on NetBSD 11.99.1? I recently updated and
my pen no longer works. All other inputs methods work such as the
touchpoint, touchpad, and the touch screen _without_ the pen. Was
there something that changed in xsrc that might have caused this?
Here is the output of xinput(1):
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ /dev/wsmouse1 id=7 [slave pointer (2)]
⎜ ↳ /dev/wsmouse2 id=8 [slave pointer (2)]
⎜ ↳ /dev/wsmouse3 id=9 [slave pointer (2)]
⎜ ↳ /dev/wsmouse id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ /dev/wskbd id=6 [slave keyboard (3)]
Note on my NetBSD 10 system I believe there were 4 wsmouse devices.
And here is my Xorg.log:
[ 12.811]
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[ 12.812] Current Operating System: NetBSD johannes 11.99.1 NetBSD 11.99.1 (GENERIC) #0: Sun Aug 31 09:15:32 UTC 2025 kev@johannes:/home/kev/netbsd/obj/sys/arch/amd64/compile/GENERIC amd64
[ 12.812]
[ 12.813] Current version of pixman: 0.46.4
[ 12.813] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.813] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.813] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 1 08:51:06 2025
[ 12.814] (==) Using config file: "/etc/X11/xorg.conf"
[ 12.817] (==) ServerLayout "X.org Configured"
[ 12.817] (**) |-->Screen "Screen0" (0)
[ 12.817] (**) | |-->Monitor "Monitor0"
[ 12.818] (**) | |-->Device "Card0"
[ 12.819] (**) |-->Input Device "Mouse0"
[ 12.819] (**) |-->Input Device "Keyboard0"
[ 12.819] (**) Allowing byte-swapped clients
[ 12.819] (==) Automatically adding devices
[ 12.819] (==) Automatically enabling devices
[ 12.819] (==) Not automatically adding GPU devices
[ 12.819] (==) Automatically binding GPU devices
[ 12.819] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12.821] (WW) The directory "/usr/pkg/share/fonts/X11/Type1/" does not exist.
[ 12.821] Entry deleted from font path.
[ 12.821] (WW) The directory "/usr/pkg/share/fonts/X11/75dpi/" does not exist.
[ 12.821] Entry deleted from font path.
[ 12.821] (WW) The directory "/usr/pkg/share/fonts/X11/100dpi/" does not exist.
[ 12.821] Entry deleted from font path.
[ 12.821] (WW) The directory "/usr/pkg/share/fonts/X11/Type1/" does not exist.
[ 12.821] Entry deleted from font path.
[ 12.821] (WW) The directory "/usr/pkg/share/fonts/X11/75dpi/" does not exist.
[ 12.821] Entry deleted from font path.
[ 12.821] (WW) The directory "/usr/pkg/share/fonts/X11/100dpi/" does not exist.
[ 12.821] Entry deleted from font path.
[ 12.821] (**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/pkg/share/fonts/X11/misc/,
/usr/pkg/share/fonts/X11/TTF/,
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/pkg/share/fonts/X11/misc/,
/usr/pkg/share/fonts/X11/TTF/
[ 12.821] (**) ModulePath set to "/usr/X11R7/lib/modules"
[ 12.821] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 12.821] (WW) Disabling Mouse0
[ 12.821] (WW) Disabling Keyboard0
[ 12.822] (II) Loader magic: 0x32e780
[ 12.822] (II) Module ABI versions:
[ 12.822] X.Org ANSI C Emulation: 0.4
[ 12.822] X.Org Video Driver: 25.2
[ 12.822] X.Org XInput driver : 24.4
[ 12.822] X.Org Server Extension : 10.0
[ 12.832] (--) PCI:*(0@0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 12.833] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 12.833] (II) LoadModule: "dri"
[ 12.833] (II) Module "dri" already built-in
[ 12.833] (II) LoadModule: "dri2"
[ 12.833] (II) Module "dri2" already built-in
[ 12.833] (II) LoadModule: "glx"
[ 12.838] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[ 12.844] (II) Module glx: vendor="X.Org Foundation"
[ 12.844] compiled for 1.21.1.18, module version = 1.0.0
[ 12.844] ABI class: X.Org Server Extension, version 10.0
[ 12.845] (II) LoadModule: "shadow"
[ 12.846] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[ 12.847] (II) Module shadow: vendor="X.Org Foundation"
[ 12.847] compiled for 1.21.1.18, module version = 1.1.0
[ 12.847] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.847] (II) LoadModule: "intel"
[ 12.848] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
[ 12.857] (II) Module intel: vendor="X.Org Foundation"
[ 12.857] compiled for 1.21.1.18, module version = 2.99.917
[ 12.857] Module class: X.Org Video Driver
[ 12.857] ABI class: X.Org Video Driver, version 25.2
[ 12.858] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 12.859] (II) intel: Driver for Intel(R) HD Graphics
[ 12.859] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 12.859] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 12.859] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[ 12.859] (--) using VT number 5
[ 12.889] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200114
[ 12.890] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 12.891] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 12.891] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 12.891] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12.891] (==) intel(0): RGB weight 888
[ 12.891] (==) intel(0): Default visual is TrueColor
[ 12.896] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 12.897] (II) intel(0): Enabled output LVDS1
[ 12.897] (II) intel(0): Output VGA1 has no monitor section
[ 12.897] (II) intel(0): Enabled output VGA1
[ 12.897] (II) intel(0): Output HDMI1 has no monitor section
[ 12.897] (II) intel(0): Enabled output HDMI1
[ 12.897] (II) intel(0): Output DP1 has no monitor section
[ 12.897] (II) intel(0): Enabled output DP1
[ 12.897] (II) intel(0): Output HDMI2 has no monitor section
[ 12.898] (II) intel(0): Enabled output HDMI2
[ 12.898] (II) intel(0): Output HDMI3 has no monitor section
[ 12.898] (II) intel(0): Enabled output HDMI3
[ 12.898] (II) intel(0): Output DP2 has no monitor section
[ 12.898] (II) intel(0): Enabled output DP2
[ 12.898] (II) intel(0): Output DP3 has no monitor section
[ 12.898] (II) intel(0): Enabled output DP3
[ 12.898] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 12.898] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 12.898] (II) intel(0): Enabled output VIRTUAL1
[ 12.899] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 12.899] (==) intel(0): TearFree enabled
[ 12.899] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.899] (==) intel(0): DPI set to (96, 96)
[ 12.899] (II) Loading sub module "dri2"
[ 12.899] (II) LoadModule: "dri2"
[ 12.899] (II) Module "dri2" already built-in
[ 12.906] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 12.906] (==) intel(0): Backing store enabled
[ 12.906] (==) intel(0): Silken mouse enabled
[ 12.907] (II) intel(0): HW Cursor enabled
[ 12.911] (==) intel(0): DPMS enabled
[ 12.914] (II) intel(0): [DRI2] Setup complete
[ 12.914] (II) intel(0): [DRI2] DRI driver: i965
[ 12.914] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 12.914] (II) intel(0): direct rendering: DRI2 enabled
[ 12.914] (II) Initializing extension Generic Event Extension
[ 12.915] (II) Initializing extension SHAPE
[ 12.916] (II) Initializing extension MIT-SHM
[ 12.916] (II) Initializing extension XInputExtension
[ 12.918] (II) Initializing extension XTEST
[ 12.919] (II) Initializing extension BIG-REQUESTS
[ 12.920] (II) Initializing extension SYNC
[ 12.921] (II) Initializing extension XKEYBOARD
[ 12.923] (II) Initializing extension XC-MISC
[ 12.924] (II) Initializing extension SECURITY
[ 12.925] (II) Initializing extension XFIXES
[ 12.926] (II) Initializing extension XFree86-Bigfont
[ 12.927] (II) Initializing extension RENDER
[ 12.928] (II) Initializing extension RANDR
[ 12.930] (II) Initializing extension COMPOSITE
[ 12.931] (II) Initializing extension DAMAGE
[ 12.932] (II) Initializing extension MIT-SCREEN-SAVER
[ 12.933] (II) Initializing extension DOUBLE-BUFFER
[ 12.934] (II) Initializing extension RECORD
[ 12.935] (II) Initializing extension DPMS
[ 12.935] (II) Initializing extension Present
[ 12.936] (II) Initializing extension DRI3
[ 12.936] (II) Initializing extension X-Resource
[ 12.937] (II) Initializing extension XVideo
[ 12.938] (II) Initializing extension XVideo-MotionCompensation
[ 12.938] (II) Initializing extension GLX
[ 13.007] (II) AIGLX: Loaded and initialized i965
[ 13.007] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13.007] (II) Initializing extension XFree86-VidModeExtension
[ 13.008] (II) Initializing extension XFree86-DGA
[ 13.008] (II) Initializing extension XFree86-DRI
[ 13.009] (II) Initializing extension DRI2
[ 13.020] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 13.021] (II) intel(0): Setting screen physical size to 361 x 203
[ 13.329] (II) config/wscons: checking input device /dev/wskbd
[ 13.329] (II) wskbd: using layout us
[ 13.329] (II) LoadModule: "kbd"
[ 13.329] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[ 13.330] (II) Module kbd: vendor="X.Org Foundation"
[ 13.330] compiled for 1.21.1.18, module version = 2.0.0
[ 13.330] Module class: X.Org XInput Driver
[ 13.330] ABI class: X.Org XInput driver, version 24.4
[ 13.330] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 13.330] (**) /dev/wskbd: always reports core events
[ 13.330] (**) /dev/wskbd: always reports core events
[ 13.330] (**) Option "Protocol" "standard"
[ 13.330] (**) Option "XkbRules" "base"
[ 13.330] (**) Option "XkbModel" "pc105"
[ 13.330] (**) Option "XkbLayout" "us"
[ 13.331] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[ 13.839] (II) config/wscons: checking input device /dev/wsmouse1
[ 13.839] (II) LoadModule: "ws"
[ 13.840] (II) Loading /usr/X11R7/lib/modules/drivers/ws_drv.so
[ 13.841] (II) Module ws: vendor="X.Org Foundation"
[ 13.841] compiled for 1.21.1.18, module version = 1.3.0
[ 13.841] Module class: X.Org XInput Driver
[ 13.841] ABI class: X.Org XInput driver, version 24.4
[ 13.841] (II) Using input driver 'ws' for '/dev/wsmouse1'
[ 13.841] (**) /dev/wsmouse1: always reports core events
[ 13.841] (II) /dev/wsmouse1: debuglevel 0
[ 13.841] (**) /dev/wsmouse1: ZAxisMapping: buttons 4 and 5
[ 13.841] (**) /dev/wsmouse1 associated screen: 0
[ 13.841] (**) Option "Device" "/dev/wsmouse1"
[ 13.841] (**) /dev/wsmouse1 device will work in raw mode
[ 13.841] (II) /dev/wsmouse1 minimum x position: 0
[ 13.841] (II) /dev/wsmouse1 maximum x position: 2776
[ 13.841] (II) /dev/wsmouse1 minimum y position: 0
[ 13.841] (II) /dev/wsmouse1 maximum y position: 1569
[ 13.841] (**) /dev/wsmouse1: Buttons: 5
[ 13.842] (II) XINPUT: Adding extended input device "/dev/wsmouse1" (type: TOUCHSCREEN, id 7)
[ 13.842] (**) /dev/wsmouse1: (accel) keeping acceleration scheme 1
[ 13.842] (**) /dev/wsmouse1: (accel) acceleration profile 0
[ 13.842] (**) /dev/wsmouse1: (accel) acceleration factor: 2.000
[ 13.842] (**) /dev/wsmouse1: (accel) acceleration threshold: 4
[ 13.842] (II) config/wscons: checking input device /dev/wsmouse2
[ 13.842] (II) Using input driver 'ws' for '/dev/wsmouse2'
[ 13.842] (**) /dev/wsmouse2: always reports core events
[ 13.842] (II) /dev/wsmouse2: debuglevel 0
[ 13.842] (**) /dev/wsmouse2: ZAxisMapping: buttons 4 and 5
[ 13.842] (**) /dev/wsmouse2 associated screen: 0
[ 13.842] (**) Option "Device" "/dev/wsmouse2"
[ 13.842] (**) /dev/wsmouse2 device will work in raw mode
[ 13.842] (II) /dev/wsmouse2 minimum x position: 0
[ 13.842] (II) /dev/wsmouse2 maximum x position: 32767
[ 13.842] (II) /dev/wsmouse2 minimum y position: 0
[ 13.842] (II) /dev/wsmouse2 maximum y position: 32767
[ 13.842] (**) /dev/wsmouse2: Buttons: 5
[ 13.842] (II) XINPUT: Adding extended input device "/dev/wsmouse2" (type: TOUCHSCREEN, id 8)
[ 13.843] (**) /dev/wsmouse2: (accel) keeping acceleration scheme 1
[ 13.843] (**) /dev/wsmouse2: (accel) acceleration profile 0
[ 13.843] (**) /dev/wsmouse2: (accel) acceleration factor: 2.000
[ 13.843] (**) /dev/wsmouse2: (accel) acceleration threshold: 4
[ 13.843] (II) config/wscons: checking input device /dev/wsmouse3
[ 13.843] (II) Using input driver 'ws' for '/dev/wsmouse3'
[ 13.843] (**) /dev/wsmouse3: always reports core events
[ 13.843] (II) /dev/wsmouse3: debuglevel 0
[ 13.843] (**) /dev/wsmouse3: ZAxisMapping: buttons 4 and 5
[ 13.843] (**) /dev/wsmouse3 associated screen: 0
[ 13.843] (**) Option "Device" "/dev/wsmouse3"
[ 13.843] (**) /dev/wsmouse3 device will work in raw mode
[ 13.843] (II) /dev/wsmouse3 minimum x position: 0
[ 13.843] (II) /dev/wsmouse3 maximum x position: 2776
[ 13.843] (II) /dev/wsmouse3 minimum y position: 0
[ 13.843] (II) /dev/wsmouse3 maximum y position: 1569
[ 13.843] (**) /dev/wsmouse3: Buttons: 5
[ 13.843] (II) XINPUT: Adding extended input device "/dev/wsmouse3" (type: TOUCHSCREEN, id 9)
[ 13.843] (**) /dev/wsmouse3: (accel) keeping acceleration scheme 1
[ 13.843] (**) /dev/wsmouse3: (accel) acceleration profile 0
[ 13.843] (**) /dev/wsmouse3: (accel) acceleration factor: 2.000
[ 13.843] (**) /dev/wsmouse3: (accel) acceleration threshold: 4
[ 13.843] (II) config/wscons: checking input device /dev/wsmouse
[ 13.844] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 13.844] (**) /dev/wsmouse: always reports core events
[ 13.844] (II) /dev/wsmouse: debuglevel 0
[ 13.844] (**) /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 13.844] (**) /dev/wsmouse associated screen: 0
[ 13.844] (**) Option "Device" "/dev/wsmouse"
[ 14.330] (**) /dev/wsmouse device will work in raw mode
[ 14.330] (II) /dev/wsmouse minimum x position: 0
[ 14.330] (II) /dev/wsmouse maximum x position: 2776
[ 14.331] (II) /dev/wsmouse minimum y position: 0
[ 14.331] (II) /dev/wsmouse maximum y position: 1569
[ 14.331] (**) /dev/wsmouse: Buttons: 5
[ 14.337] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: TOUCHSCREEN, id 10)
[ 14.824] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 14.824] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 14.824] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 14.824] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 14.909] (II) intel(0): EDID vendor "LGD", prod id 728
[ 14.909] (II) intel(0): Printing DDC gathered Modelines:
[ 14.909] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 106.687] (WW) /dev/wsmouse: hscroll=0, vscroll=1024
Here is a bit of dmesg:
[ 1.028429] pms0 at pckbc1 (aux slot)
[ 1.028429] pms0: Synaptics touchpad version 8.0
[ 1.028429] pms0: Extended W mode, Passthrough, Palm detect, One button click pad, Multi-finger Report, Multi-finger, Reports max
[ 1.028429] pms0: Probed max coordinates right: 5472, top: 4448
[ 1.028429] pckbc1: using irq 12 for aux slot
[ 1.028429] wsmouse0 at pms0 mux 0
[ 1.028429] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.028429] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.028429] pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (mobile) Host Bridge (rev. 0x09)
[ 1.028429] i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge (mobile) GT2+ Integrated Graphics Device (rev. 0x09)
[ 1.028429] Intel 6 Series Chipset Family MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
[ 1.028429] puc0 at pci0 dev 22 function 3: Intel 6 Series KT (com)
[ 1.028429] com2 at puc0 port 0 (16550-compatible): ioaddr 0x50b0, interrupting at ioapic0 pin 19
[ 1.028429] com2: ns16550a, 16-byte FIFO
[ 1.028429] wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH2 LAN (82579LM) Controller (rev. 0x04)
[ 1.028429] wm0: interrupting at msi0 vec 0
[ 1.028429] wm0: PCI-Express bus
[ 1.028429] wm0: 2048 words FLASH, version 0.13.3
[ 1.028429] wm0: RX packet buffer size: 26KB
[ 1.028429] wm0: Ethernet address f0:de:f1:70:11:ef
[ 1.028429] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
[ 1.028429] ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
[ 1.028429] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.028429] ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x04)
[ 1.028429] ehci0: 64-bit DMA
[ 1.028429] ehci0: interrupting at ioapic0 pin 16
[ 1.028429] ehci0: EHCI version 1.0
[ 1.028429] ehci0: Using DMA subregion for control data structures
[ 1.028429] usb0 at ehci0: USB revision 2.0
[ 1.028429] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[ 1.028429] hdaudio0: interrupting at msi1 vec 0
[ 1.028429] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.028429] hdafg0 at hdaudio0: Conexant CX20671
[ 1.028429] hdafg0: DAC00 2ch: Speaker [Built-In]
[ 1.028429] hdafg0: DAC01 2ch: HP Out [Jack]
[ 1.028429] hdafg0: ADC02 2ch: Mic In [Jack]
[ 1.028429] hdafg0: ADC03 2ch: Mic In [Built-In]
[ 1.028429] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
[ 1.028429] audio0 at hdafg0: playback, capture, full duplex, independent
[ 1.028429] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.028429] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.028429] spkr1 at audio0: PC Speaker (synthesized)
[ 1.028429] wsbell at spkr1 not configured
[ 1.028429] hdafg1 at hdaudio0: Intel product 2805
[ 1.028429] hdafg1: DP00 8ch: Digital Out [Jack]
[ 1.028429] hdafg1: DP01 8ch: Digital Out [Jack]
[ 1.028429] hdafg1: DP02 8ch: Digital Out [Jack]
[ 1.028429] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.028429] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1.028429] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.028429] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.028429] spkr2 at audio1: PC Speaker (synthesized)
[ 1.028429] wsbell at spkr2 not configured
[ 1.028429] ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb4)
[ 1.028429] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.028429] pci1 at ppb0 bus 2
[ 1.028429] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.028429] ppb1 at pci0 dev 28 function 1: Intel 6 Series Chipset Family PCIe Root Port 2 (rev. 0xb4)
[ 1.028429] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.028429] ppb1: link is x1 @ 2.5GT/s
[ 1.028429] pci2 at ppb1 bus 3
[ 1.028429] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.028429] iwm0 at pci2 dev 0 function 0: Intel Dual Band Wireless AC 8260 (rev. 0x3a)
[ 1.028429] iwm0: interrupting at msi2 vec 0
[ 1.028429] ppb2 at pci0 dev 28 function 3: Intel 6 Series Chipset Family PCIe Root Port 4 (rev. 0xb4)
[ 1.028429] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.028429] pci3 at ppb2 bus 5
[ 1.028429] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.028429] ppb3 at pci0 dev 28 function 4: Intel 6 Series Chipset Family PCIe Root Port 5 (rev. 0xb4)
[ 1.028429] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.028429] ppb3: link is x1 @ 2.5GT/s
[ 1.028429] pci4 at ppb3 bus 13
[ 1.028429] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.028429] sdhc0 at pci4 dev 0 function 0: Ricoh 5U823 SD/MMC Controller (rev. 0x04)
[ 1.028429] sdhc0: interrupting at ioapic0 pin 16
[ 1.028429] sdhc0: SDHC 3.0, rev 5, caps <21e8c8b2/00008073>, SDMA, 200000 kHz, HS SDR50 SDR104 HS200 3.3V, re-tuning mode 3, 512 byte blocks
[ 1.028429] sdmmc0 at sdhc0 slot 0
[ 1.028429] ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x04)
[ 1.028429] ehci1: 64-bit DMA
[ 1.028429] ehci1: interrupting at ioapic0 pin 23
[ 1.028429] ehci1: EHCI version 1.0
[ 1.028429] ehci1: Using DMA subregion for control data structures
[ 1.028429] usb1 at ehci1: USB revision 2.0
[ 1.028429] ichlpcib0 at pci0 dev 31 function 0: Intel QM67 LPC (rev. 0x04)
[ 1.028429] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[ 1.028429] ichlpcib0: 24-bit timer
[ 1.028429] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.028429] tco0: Min/Max interval 1/367 seconds
[ 1.028429] ahcisata0 at pci0 dev 31 function 2: Intel 6 Series Chipset Family AHCI 2 (rev. 0x04)
[ 1.028429] ahcisata0: 64-bit DMA
[ 1.028429] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
[ 1.028429] ahcisata0: interrupting at msi3 vec 0
[ 1.028429] atabus0 at ahcisata0 channel 0
[ 1.028429] atabus1 at ahcisata0 channel 1
[ 1.028429] atabus2 at ahcisata0 channel 4
[ 1.028429] ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x04)
[ 1.028429] ichsmb0: interrupting at ioapic0 pin 18
[ 1.028429] iic0 at ichsmb0: I2C bus
[ 1.028429] isa0 at ichlpcib0
[ 1.028429] acpicpu0 at cpu0: ACPI CPU
[ 1.028429] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.028429] acpicpu0: C2: I/O, lat 80 us, pow 500 mW
[ 1.028429] acpicpu0: C3: I/O, lat 109 us, pow 200 mW
[ 1.028429] acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2701 MHz, turbo boost
[ 1.028429] acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2700 MHz
[ 1.028429] acpicpu0: P2: FFH, lat 10 us, pow 29755 mW, 2400 MHz
[ 1.028429] acpicpu0: P3: FFH, lat 10 us, pow 26757 mW, 2200 MHz
[ 1.028429] acpicpu0: P4: FFH, lat 10 us, pow 23879 mW, 2000 MHz
[ 1.028429] acpicpu0: P5: FFH, lat 10 us, pow 20795 mW, 1800 MHz
[ 1.028429] acpicpu0: P6: FFH, lat 10 us, pow 18149 mW, 1600 MHz
[ 1.028429] acpicpu0: P7: FFH, lat 10 us, pow 15309 mW, 1400 MHz
[ 1.028429] acpicpu0: P8: FFH, lat 10 us, pow 12884 mW, 1200 MHz
[ 1.028429] acpicpu0: P9: FFH, lat 10 us, pow 10568 mW, 1000 MHz
[ 1.028429] acpicpu0: P10: FFH, lat 10 us, pow 8075 mW, 800 MHz
[ 1.028429] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.028429] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.028429] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.028429] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.028429] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.028429] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.028429] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.028429] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.028429] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
[ 1.028429] acpicpu1 at cpu1: ACPI CPU
[ 1.028429] acpicpu2 at cpu2: ACPI CPU
[ 1.028429] coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
[ 1.028429] acpicpu3 at cpu3: ACPI CPU
[ 1.028429] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.498952] timecounter: Timecounter "TSC" frequency 2691263000 Hz quality 3000
[ 1.500392] acpiacad0: AC adapter offline.
[ 1.508942] acpibat0: LGC LION rechargeable battery
[ 1.508942] acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
[ 1.508942] uhub0 at usb1tpm0: tpm is deactivated
[ 1.508942] : NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.508942] tpm0: deactivating entropy source
[ 1.508942] uhub0: 3 ports with 3 removable, self powered
[ 1.508942] IPsec: Initialized Security Association Processing.
[ 1.518941] uhub1 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.518941] uhub1: 3 ports with 3 removable, self powered
[ 1.598939] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 2.578935] uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 2.578935] uhub2: single transaction translator
[ 2.578935] uhub2: 8 ports with 8 removable, self powered
[ 2.588935] uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 2.588935] uhub3: single transaction translator
[ 2.588935] uhub3: 6 ports with 6 removable, self powered
[ 3.128933] wd0 at atabus0 drive 0
[ 3.128933] wd0: <KINGSTON SA400S37960G>
[ 3.128933] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[ 3.128933] wd0: 894 GB, 1860501 cyl, 16 head, 63 sec, 512 bytes/sect x 1875385008 sectors
[ 3.128933] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 3.128933] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 3.428932] ubt0 at uhub2 port 3
[ 3.428932] ubt0: vendor 8087 (0x8087) product 0a2b (0x0a2b), rev 2.00/0.01, addr 3
[ 3.438932] ugen0 at uhub3 port 3
[ 3.438932] ugen0: UPEK (0x147e) Biometric Coprocessor (0x2016), rev 1.01/0.02, addr 3
[ 3.938930] uhidev0 at uhub2 port 5 configuration 1 interface 0
[ 3.938930] uhidev0: Tablet (0x056a) ISD-V4 (0x00e6), rev 1.10/1.39, addr 4, iclass 3/0
[ 3.938930] uhidev0: 17 report ids
[ 3.938930] uhid0 at uhidev0 reportid 2: input=7, output=0, feature=0
[ 3.938930] uhid1 at uhidev0 reportid 17: input=7, output=0, feature=3
[ 3.948928] uhidev1 at uhub2 port 5 configuration 1 interface 1
[ 3.948928] uhidev1: Tablet (0x056a) ISD-V4 (0x00e6), rev 1.10/1.39, addr 4, iclass 3/0
[ 3.948928] ubt1 at uhub3 port 4
[ 3.948928] ubt1: Broadcom Corp (0x0a5c) Broadcom Bluetooth Device (0x217f), rev 2.00/7.48, addr 4
[ 3.948928] uhidev1: 16 report ids
[ 3.948928] uhid2 at uhidev1 reportid 2: input=0, output=0, feature=1
[ 3.948928] uhid3 at uhidev1 reportid 3: input=0, output=0, feature=3
[ 3.948928] uhid4 at uhidev1 reportid 5: input=0, output=0, feature=8
[ 3.948928] uhid5 at uhidev1 reportid 6: input=0, output=0, feature=8
[ 3.948928] uts0 at uhidev1 reportid 12
[ 3.948928] wsmouse1 at uts0 mux 0
[ 3.948928] uts1 at uhidev1 reportid 13
[ 3.948928] uts1: autoconfiguration error: touchscreen has no range report
[ 3.948928] ums0 at uhidev1 reportid 14autoconfiguration error:
[ 3.948928] ums0: mouse has no X report
[ 3.948928] ums1 at uhidev1 reportid 15: 2 buttons digitizer
[ 3.948928] wsmouse2 at ums1 mux 0
[ 3.948928] uts2 at uhidev1 reportid 16
[ 3.948928] wsmouse3 at uts2 mux 0
[ 3.948928] swwdog0: software watchdog initialized
[ 3.958928] WARNING: 2 errors while detecting hardware; check system log.
I, sadly, don't know the interworkings of NetBSD enough to know much
about this. I do see uts1 and uts0 get initialized and there is
mention of the digitizer with ums1 but I don't know what it means
Any ideas would be grealy appreciated!
Thanks
kev
Home |
Main Index |
Thread Index |
Old Index