Current-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Upgrading a 90s laptop from 5.1 to 10 -- no FD or CDROM



The days are short and work has slowed down. 'Tis the season to get the
old hardware out!

I have a '98 Toshiba Satellite Pro laptop running a 2010 build of NetBSD
5.1. It runs great including X11. No tmux though :(

So how do I get NetBSD 10 on this? There are some challenges.

I have a pcmcia 3Com NIC and so internet access (IPv6 only!). But the FD
adapter and the CDROM bay both died years ago.

I can plug in a pcmcia CF card and mount it. The old BIOS can't boot from
that though. There's also a single USB revision 1.0 port.

Take the old HD out and try to put a boot image on it?

Below is dmesg.

Thanks - Joel

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.0_PATCH (ROCK) #5: Tue Dec 21 08:31:59 PST 2010
        joelp@baker.westlab:/usr/obj/sys/arch/i386/compile/ROCK
total memory = 81660 KB
avail memory = 75672 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Generic PC
mainbus0 (root)
cpu0 at mainbus0: Intel 586-class, 132MHz, id 0x543
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1179 product 0x0601 (rev. 0x27)
vga1 at pci0 dev 4 function 0: vendor 0x102c product 0x00e4 (rev. 0xc2)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ohci0 at pci0 dev 11 function 0: vendor 0x1033 product 0x0035 (rev. 0x01)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atabus0 at wdc0 channel 0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, playback, capture, mmap, independent
opl0 at sb0: model OPL3
midi0 at opl0: SB Yamaha OPL3 (CPU-intensive output)
wss0 at isa0 port 0x530-0x537 irq 10 drq 0,1: CS4231
audio1 at wss0: full duplex, playback, capture, mmap
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Advanced Power Management BIOS: Power Management spec V1.2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 132643830 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
pcic0: controller 0 detecting irqs with mask 0xdeb8:..9..15
pcic0: using irq 9 for socket events
pcic0: WARNING: powerhook_establish is deprecated
pcic0: WARNING: powerhook_establish is deprecated
uhub0 at usb0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wdc1 at pcmcia0 function 0: <TRANSCEND, TS8GCF133, >
pcic0: port 0x400-0x40f
wdc1: i/o mapped mode
pcmcia0: card irq 15
atabus1 at wdc1 channel 0
ep0 at pcmcia1 function 0: <3Com, Megahertz 574B, B, 001>
pcic0: port 0x420-0x43f
pcmcia1: card irq 9
ep0: address 00:50:04:fd:31:c2, 64KB word-wide FIFO, 1:1 Rx:Tx split
tqphy0 at ep0 phy 0: 78Q2120 10/100 media interface, rev. 10
tqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wd0 at atabus0 drive 0: <IBM-DMCA-21215>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1160 MB, 2358 cyl, 16 head, 63 sec, 512 bytes/sect x 2376864 sectors
wd0: drive supports PIO mode 4, DMA mode 1
wd1 at atabus1 drive 0: <TS8GCF133>
wd1: drive supports 1-sector PIO transfers, LBA addressing
wd1: 7647 MB, 15538 cyl, 16 head, 63 sec, 512 bytes/sect x 15662304 sectors
wd1: drive supports PIO mode 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
pcmcia0: card irq 15
pcmcia0: card irq 15
pcmcia0: card irq 15
pcmcia0: card irq 15
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pcmcia0: card irq 15
pcmcia1: card irq 15
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
pcmcia0: card irq 9



Home | Main Index | Thread Index | Old Index