Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
current - latest suspend tests T43 - T30 - R51
Hi,
given the recent commits I got the netbsd-GENERIC.gz kernel from releng
as of 3 Dec.
ThinkPad T43
Nothing disabled. "Reference" but still not perfect sleep:
- goes correctly to sleep
- comes up again
- with bge0 working
- TouchPad and TrackPoint are not working after resume (even if sleep
was put without running X11 and starting it later)
- with iwi0 configured, went to sleep, but did not resume correctly,
remaining a black screen and unresponsive system (fan whirring)
ThinkPad T30
Disable:
audio, video, isa, usb, fxp, iwi
I still get a reboot of fatal protection fault in supervisor mode,
trap_tss() at netbsd:trap_tss
If desired I can attach a screenshot.
ThinkPad R51
Disable:
audio, video, isa, usb, fxp, iwi
I see 2 green lines of kernel messages and then a black screen, however
the laptop does not reboot nor is off. I need to power-cycle it.
Essentially, since last attempts, nothing changed.
Given the dmesg attached for T50 and , what else could I disable?
I'm out of ideas!
Further question: if I see "Flushing disk caches" but still I get a
dirty file system when I reboot on the T30 and R51 - why?
Riccardo
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.26 (GENERIC) #0: Mon Dec 3 06:43:19 UTC 2018
[ 1.0000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
[ 1.0000000] total memory = 2038 MB
[ 1.0000000] avail memory = 1983 MB
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000000] Kernelized RAIDframe activated
[ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.0000000] userconf: configure system autoconfiguration:
[ 1.0000000] uc> disable audio
[ 1.0000000] [ 0] audio* disabled
[ 1.0000000] [ 1] audio* disabled
[ 1.0000000] uc> i^H ^Hdisable video
[ 1.0000000] [ 6] video* disabled
[ 1.0000000] uc> disable isa
[ 1.0000000] [469] isa0 disabled
[ 1.0000000] [470] isa0 disabled
[ 1.0000000] [471] isa0 disabled
[ 1.0000000] [472] isa0 disabled
[ 1.0000000] [473] isa0 disabled
[ 1.0000000] [474] isa0 disabled
[ 1.0000000] [475] isa0 disabled
[ 1.0000000] [476] isa0 disabled
[ 1.0000000] uc> i^H ^Hdisable usb
[ 1.0000000] [542] usb* disabled
[ 1.0000000] [543] usb* disabled
[ 1.0000000] [544] usb* disabled
[ 1.0000000] [545] usb* disabled
[ 1.0000000] [546] usb* disabled
[ 1.0000000] [547] usb* disabled
[ 1.0000000] uc> disable fxp
[ 1.0000000] [156] fxp* disabled
[ 1.0000000] [157] fxp* disabled
[ 1.0000000] uc> disable iwi
[ 1.0000000] [418] iwi* disabled
[ 1.0000000] uc> quit
[ 1.0000000] Continuing...
[ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.0000030] IBM 288732G (ThinkPad R51)
[ 1.0000030] mainbus0 (root)
[ 1.0000030] ACPI: RSDP 0x00000000000F6DA0 000024 (v02 IBM )
[ 1.0000030] ACPI: XSDT 0x000000007F6EB16B 00004C (v01 IBM TP-1V 00001290 LTP 00000000)
[ 1.0000030] ACPI: FACP 0x000000007F6EB200 0000F4 (v03 IBM TP-1V 00001290 IBM 00000001)
[ 1.0000030] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20180810/tbfadt-642)
[ 1.0000030] Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20180810/tbfadt-693)
[ 1.0000030] ACPI: DSDT 0x000000007F6EB3E7 00BA37 (v01 IBM TP-1V 00001290 MSFT 0100000E)
[ 1.0000030] ACPI: FACS 0x000000007F6F8000 000040
[ 1.0000030] ACPI: SSDT 0x000000007F6EB3B4 000033 (v01 IBM TP-1V 00001290 MSFT 0100000E)
[ 1.0000030] ACPI: ECDT 0x000000007F6F6E1E 000052 (v01 IBM TP-1V 00001290 IBM 00000001)
[ 1.0000030] ACPI: TCPA 0x000000007F6F6E70 000032 (v01 IBM TP-1V 00001290 PTL 00000001)
[ 1.0000030] ACPI: BOOT 0x000000007F6F6FD8 000028 (v01 IBM TP-1V 00001290 LTP 00000001)
[ 1.0000030] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 1.0000030] cpu0 at mainbus0
[ 1.0000030] cpu0: Intel(R) Pentium(R) M processor 1500MHz, id 0x695
[ 1.0000030] cpu0: package 0, core 0, smt 0
[ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180810
[ 1.0000030] acpi0: X/RSDT: OemId <IBM ,TP-1V ,00001290>, AslId < LTP,00000000>
[ 1.0000030] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
[ 1.0000030] LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 11
[ 1.0000030] LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
[ 1.0000030] LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
[ 1.0000030] LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
[ 1.0000030] LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
[ 1.0000030] LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
[ 1.0000030] LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
[ 1.0000030] LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
[ 1.0000030] LNKF: ACPI: Found matching pin for 2.2.INTA at func 0: 11
[ 1.0000030] LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 11
[ 1.0000030] acpi0: SCI interrupting at int 9
[ 1.0000030] acpi0: fixed power button present
[ 1.0000030] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.0095330] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
[ 1.0095330] MEM (PNP0C01) at acpi0 not configured
[ 1.0095330] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.0095330] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.0095330] SIO (PNP0C02) at acpi0 not configured
[ 1.0095330] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
[ 1.0095330] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.0095330] midi0 at pcppi1: PC speaker
[ 1.0095330] sysbeep0 at pcppi1
[ 1.0095330] FPU (PNP0C04) at acpi0 not configured
[ 1.0095330] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
[ 1.0095330] pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
[ 1.0095330] LPT (PNP0400) at acpi0 not configured
[ 1.0095330] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
[ 1.0095330] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
[ 1.0095330] thinkpad0 at acpi0 (HKEY, IBM0068)
[ 1.0095330] acpivga0 at acpi0 (VID): ACPI Display Adapter
[ 1.0095330] acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
[ 1.0095330] acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
[ 1.0095330] acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
[ 1.0095330] acpivga0: connected output devices:
[ 1.0095330] acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
[ 1.0095330] acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
[ 1.0095330] acpivga0: 0x0200 (acpiout2): TV, head 0
[ 1.0095330] acpitz0 at acpi0 (THM0)
[ 1.0095330] acpitz0: levels: critical 94.0 C, passive 86.5 C, passive cooling
[ 1.0095330] apm0 at acpi0: Power Management spec V1.2
[ 1.0095330] attimer1: attached to pcppi1
[ 1.0095330] pckbd0 at pckbc1 (kbd slot)
[ 1.0095330] pckbc1: using irq 1 for kbd slot
[ 1.0095330] wskbd0 at pckbd0: console keyboard
[ 1.0095330] pms0 at pckbc1 (aux slot)
[ 1.0095330] pms0: Synaptics touchpad version 5.9
[ 1.0095330] pms0: Passthrough, Palm detect, Multi-finger
[ 1.0095330] pckbc1: using irq 12 for aux slot
[ 1.0095330] wsmouse0 at pms0 mux 0
[ 1.0095330] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.0095330] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.0095330] pchb0 at pci0 dev 0 function 0: vendor 8086 product 3580 (rev. 0x02)
[ 1.0095330] agp0 at pchb0: i855-family chipset
[ 1.0095330] agp0: detected 8060k stolen memory
[ 1.0095330] agp0: aperture at 0xe0000000, size 0x8000000
[ 1.0095330] vendor 8086 product 3584 (miscellaneous system, revision 0x02) at pci0 dev 0 function 1 not configured
[ 1.0095330] vendor 8086 product 3585 (miscellaneous system, revision 0x02) at pci0 dev 0 function 3 not configured
[ 1.0095330] i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 3582 (rev. 0x02)
[ 1.0095330] vendor 8086 product 3582 (miscellaneous display, revision 0x02) at pci0 dev 2 function 1 not configured
[ 1.0095330] uhci0 at pci0 dev 29 function 0: vendor 8086 product 24c2 (rev. 0x01)
[ 1.0095330] uhci0: interrupting at irq 11
[ 1.0095330] usb at uhci0 not configured
[ 1.0095330] uhci1 at pci0 dev 29 function 1: vendor 8086 product 24c4 (rev. 0x01)
[ 1.0095330] uhci1: interrupting at irq 11
[ 1.0095330] usb at uhci1 not configured
[ 1.0095330] uhci2 at pci0 dev 29 function 2: vendor 8086 product 24c7 (rev. 0x01)
[ 1.0095330] uhci2: interrupting at irq 11
[ 1.0095330] usb at uhci2 not configured
[ 1.0095330] ehci0 at pci0 dev 29 function 7: vendor 8086 product 24cd (rev. 0x01)
[ 1.0095330] ehci0: interrupting at irq 11
[ 1.0095330] ehci0: EHCI version 1.0
[ 1.0095330] ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
[ 1.0095330] usb at ehci0 not configured
[ 1.0095330] ppb0 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x81)
[ 1.0095330] pci1 at ppb0 bus 2
[ 1.0095330] pci1: i/o space, memory space enabled
[ 1.0095330] cbb0 at pci1 dev 0 function 0: vendor 104c product ac56 (rev. 0x00)
[ 1.0095330] vendor 8086 product 4220 (miscellaneous network, revision 0x05) at pci1 dev 2 function 0 not configured
[ 1.0095330] vendor 8086 product 103d (ethernet network, revision 0x81) at pci1 dev 8 function 0 not configured
[ 1.0095330] cbb0: cacheline 0x8 lattimer 0x40
[ 1.0095330] cbb0: bhlc 0x24008
[ 1.0095330] cbb0: interrupting at irq 11
[ 1.0095330] cardslot0 at cbb0
[ 1.0095330] cardbus0 at cardslot0: bus 3
[ 1.0095330] pcmcia0 at cardslot0
[ 1.0095330] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 24cc (rev. 0x01)
[ 1.0095330] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[ 1.0095330] ichlpcib0: 24-bit timer
[ 1.0095330] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.0095330] tco0: Min/Max interval 2/37 seconds
[ 1.0095330] ichlpcib0: SpeedStep enabled
[ 1.0095330] piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
[ 1.0095330] piixide0: bus-master DMA support present
[ 1.0095330] piixide0: primary channel configured to compatibility mode
[ 1.0095330] piixide0: primary channel interrupting at irq 14
[ 1.0095330] atabus0 at piixide0 channel 0
[ 1.0095330] piixide0: secondary channel configured to compatibility mode
[ 1.0095330] piixide0: secondary channel interrupting at irq 15
[ 1.0095330] atabus1 at piixide0 channel 1
[ 1.0095330] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 24c3 (rev. 0x01)
[ 1.0095330] ichsmb0: interrupting at irq 11
[ 1.0095330] iic0 at ichsmb0: I2C bus
[ 1.0095330] auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
[ 1.0095330] auich0: interrupting at irq 11
[ 1.0095330] auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
[ 1.0095330] auich0: ac97: ext id 0x601<AC97_22,AMAP,VRA>
[ 1.0095330] vendor 8086 product 24c6 (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
[ 1.0095330] isa at ichlpcib0 not configured
[ 1.0095330] isa at mainbus0 not configured
[ 1.0095330] est0 at cpu0: Enhanced SpeedStep
[ 1.0095330] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.4709972] auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
[ 1.4709972] audio at auich0 not configured
[ 1.4709972] acpiacad0: AC adapter online.
[ 1.4909986] IPsec: Initialized Security Association Processing.
[ 1.5009991] acpibat0: SANYO LION rechargeable battery
[ 1.5009991] acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
[ 4.4710433] wd0 at atabus0 drive 0
[ 4.4710433] wd0: <FUJITSU MHT2030AT>
[ 4.4710433] wd0: drive supports 16-sector PIO transfers, LBA addressing
[ 4.4710433] wd0: 28615 MB, 62016 cyl, 15 head, 63 sec, 512 bytes/sect x 58605120 sectors
[ 4.9710510] wd0: 32-bit data port
[ 4.9710510] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[ 4.9710510] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[ 4.9710510] atapibus0 at atabus1: 2 targets
[ 4.9810517] cd0 at atapibus0 drive 0: <DW-225, , 2.2A> cdrom removable
[ 4.9810517] cd0: 32-bit data port
[ 4.9810517] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[ 4.9810517] cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[ 5.0510525] boot device: wd0
[ 5.0510525] root on wd0a dumps on wd0b
[ 5.0810527] root file system type: ffs
[ 5.0810527] kern.module.path=/stand/i386/8.99.26/modules
[ 5.0810527] kern info: [drm] Memory usable by graphics device = 128M
[ 5.0810527] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.0810527] kern info: [drm] Driver supports precise vblank timestamp query.
[ 5.0810527] i915drmkms0: interrupting at irq 11 (i915drmkms0)
[ 5.1010530] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:363)intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe A FIFO underrun
[ 5.1010530] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:363)intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe B FIFO underrun
[ 5.1110562] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_gem_stolen.c:560)i915_pages_create_for_stolen] *ERROR* failed to load DMA map for stolen object: -22
[ 5.1110562] kern info: [drm] initialized overlay support
[ 5.1510540] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/i915_gem_stolen.c:560)i915_pages_create_for_stolen] *ERROR* failed to load DMA map for stolen object: -22
[ 5.1610601] intelfb0 at i915drmkms0
[ 5.1610601] intelfb0: framebuffer at 0xdc368000, size 1024x768, depth 32, stride 4096
[ 5.7810648] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 5.7973800] wsmux1: connecting to wsdisplay0
[ 8.6011070] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 8.6011070] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 8.6111114] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 8.6111114] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 8.99.26 (GENERIC) #0: Mon Dec 3 06:43:19 UTC 2018
[ 1.0000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
[ 1.0000000] total memory = 1535 MB
[ 1.0000000] avail memory = 1488 MB
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000000] Kernelized RAIDframe activated
[ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.0000030] IBM 236688G (Not Available)
[ 1.0000030] mainbus0 (root)
[ 1.0000030] ACPI: RSDP 0x00000000000F7010 000024 (v02 IBM )
[ 1.0000030] ACPI: XSDT 0x000000005FF731CD 00004C (v01 IBM TP-1I 00002100 LTP 00000000)
[ 1.0000030] ACPI: FACP 0x000000005FF73300 000081 (v01 IBM TP-1I 00002100 IBM 00000001)
[ 1.0000030] ACPI: DSDT 0x000000005FF733E7 00AAD5 (v01 IBM TP-1I 00002100 MSFT 0100000D)
[ 1.0000030] ACPI: FACS 0x000000005FF7F000 000040
[ 1.0000030] ACPI: SSDT 0x000000005FF733B4 000033 (v01 IBM TP-1I 00002100 MSFT 0100000D)
[ 1.0000030] ACPI: ECDT 0x000000005FF7DEBC 000052 (v01 IBM TP-1I 00002100 IBM 00000001)
[ 1.0000030] ACPI: TCPA 0x000000005FF7DF0E 000032 (v01 IBM TP-1I 00002100 PTL 00000001)
[ 1.0000030] ACPI: BOOT 0x000000005FF7DFD8 000028 (v01 IBM TP-1I 00002100 LTP 00000001)
[ 1.0000030] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 1.0000030] cpu0 at mainbus0
[ 1.0000030] cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz, id 0xf27
[ 1.0000030] cpu0: package 0, core 0, smt 0
[ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180810
[ 1.0000030] acpi0: X/RSDT: OemId <IBM ,TP-1I ,00002100>, AslId < LTP,00000000>
[ 1.0000030] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
[ 1.0000030] LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
[ 1.0000030] LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
[ 1.0000030] LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
[ 1.0000030] LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
[ 1.0000030] LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
[ 1.0000030] LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
[ 1.0000030] LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
[ 1.0000030] LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11
[ 1.0000030] LNKC: ACPI: Found matching pin for 2.2.INTA at func 0: 11
[ 1.0000030] LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 11
[ 1.0000030] acpi0: SCI interrupting at int 9
[ 1.0000030] acpi0: fixed power button present
[ 1.0000030] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.0071712] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
[ 1.0071712] MEM (PNP0C01) at acpi0 not configured
[ 1.0071712] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
[ 1.0071712] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.0071712] SIO (PNP0C02) at acpi0 not configured
[ 1.0071712] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
[ 1.0071712] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.0071712] midi0 at pcppi1: PC speaker
[ 1.0071712] sysbeep0 at pcppi1
[ 1.0071712] FPU (PNP0C04) at acpi0 not configured
[ 1.0071712] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
[ 1.0071712] pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
[ 1.0071712] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
[ 1.0071712] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
[ 1.0071712] thinkpad0 at acpi0 (HKEY, IBM0068)
[ 1.0071712] acpivga0 at acpi0 (VID): ACPI Display Adapter
[ 1.0071712] acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
[ 1.0071712] acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
[ 1.0071712] acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
[ 1.0071712] acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
[ 1.0071712] acpivga0: connected output devices:
[ 1.0071712] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0
[ 1.0071712] acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0
[ 1.0071712] acpivga0: 0x0200 (acpiout2): TV, head 0
[ 1.0071712] acpivga0: 0x0210 (acpiout3): Unknown Output Device, head 0
[ 1.0071712] acpitz0 at acpi0 (THM0)
[ 1.0071712] acpitz0: levels: critical 92.0 C, passive 86.5 C, passive cooling
[ 1.0071712] apm0 at acpi0: Power Management spec V1.2
[ 1.0071712] attimer1: attached to pcppi1
[ 1.0071712] pckbd0 at pckbc1 (kbd slot)
[ 1.0071712] pckbc1: using irq 1 for kbd slot
[ 1.0071712] wskbd0 at pckbd0: console keyboard
[ 1.0071712] pms0 at pckbc1 (aux slot)
[ 1.0071712] pckbc1: using irq 12 for aux slot
[ 1.0071712] wsmouse0 at pms0 mux 0
[ 1.0071712] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.0071712] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.0071712] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1a30 (rev. 0x04)
[ 1.0071712] agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
[ 1.0071712] ppb0 at pci0 dev 1 function 0: vendor 8086 product 1a31 (rev. 0x04)
[ 1.0071712] pci1 at ppb0 bus 1
[ 1.0071712] pci1: i/o space, memory space enabled
[ 1.0071712] vga0 at pci1 dev 0 function 0: vendor 1002 product 4c57 (rev. 0x00)
[ 1.0071712] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
[ 1.0071712] wsmux1: connecting to wsdisplay0
[ 1.0071712] drm at vga0 not configured
[ 1.0071712] uhci0 at pci0 dev 29 function 0: vendor 8086 product 2482 (rev. 0x02)
[ 1.0071712] uhci0: interrupting at irq 11
[ 1.0071712] usb0 at uhci0: USB revision 1.0
[ 1.0071712] uhci1 at pci0 dev 29 function 1: vendor 8086 product 2484 (rev. 0x02)
[ 1.0071712] uhci1: interrupting at irq 11
[ 1.0071712] usb1 at uhci1: USB revision 1.0
[ 1.0071712] uhci2 at pci0 dev 29 function 2: vendor 8086 product 2487 (rev. 0x02)
[ 1.0071712] uhci2: interrupting at irq 11
[ 1.0071712] usb2 at uhci2: USB revision 1.0
[ 1.0071712] ppb1 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x42)
[ 1.0071712] pci2 at ppb1 bus 2
[ 1.0071712] pci2: i/o space, memory space enabled
[ 1.0071712] cbb0 at pci2 dev 0 function 0: vendor 104c product ac55 (rev. 0x01)
[ 1.0071712] cbb1 at pci2 dev 0 function 1: vendor 104c product ac55 (rev. 0x01)
[ 1.0071712] iwi0 at pci2 dev 2 function 0: vendor 8086 product 4220 (rev. 0x05)
[ 1.0071712] iwi0: interrupting at irq 11
[ 1.0071712] iwi0: 802.11 address 00:16:6f:0c:0f:59
[ 1.0071712] iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 1.0071712] iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 1.0071712] fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x42)
[ 1.0071712] fxp0: interrupting at irq 11
[ 1.0071712] fxp0: Ethernet address 00:09:6b:30:89:cb
[ 1.0071712] inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
[ 1.0071712] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0071712] cbb0: cacheline 0x8 lattimer 0x40
[ 1.0071712] cbb0: bhlc 0x824008
[ 1.0071712] cbb0: interrupting at irq 11
[ 1.0071712] cardslot0 at cbb0
[ 1.0071712] cardbus0 at cardslot0: bus 3
[ 1.0071712] pcmcia0 at cardslot0
[ 1.0071712] cbb1: cacheline 0x8 lattimer 0x40
[ 1.0071712] cbb1: bhlc 0x824008
[ 1.0071712] cbb1: interrupting at irq 11
[ 1.0071712] cardslot1 at cbb1
[ 1.0071712] cardbus1 at cardslot1: bus 6
[ 1.0071712] pcmcia1 at cardslot1
[ 1.0071712] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 248c (rev. 0x02)
[ 1.0071712] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[ 1.0071712] ichlpcib0: 24-bit timer
[ 1.0071712] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.0071712] tco0: Min/Max interval 2/37 seconds
[ 1.0071712] ichlpcib0: SpeedStep enabled
[ 1.0071712] piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
[ 1.0071712] piixide0: bus-master DMA support present
[ 1.0071712] piixide0: primary channel configured to compatibility mode
[ 1.0071712] piixide0: primary channel interrupting at irq 14
[ 1.0071712] atabus0 at piixide0 channel 0
[ 1.0071712] piixide0: secondary channel configured to compatibility mode
[ 1.0071712] piixide0: secondary channel interrupting at irq 15
[ 1.0071712] atabus1 at piixide0 channel 1
[ 1.0071712] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2483 (rev. 0x02)
[ 1.0071712] ichsmb0: interrupting at irq 11
[ 1.0071712] iic0 at ichsmb0: I2C bus
[ 1.0071712] auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
[ 1.0071712] auich0: interrupting at irq 11
[ 1.0071712] auich0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
[ 1.0071712] auich0: ac97: ext id 0x1<VRA>
[ 1.0071712] vendor 8086 product 2486 (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
[ 1.0071712] isa0 at ichlpcib0
[ 1.0071712] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 2.1863588] auich0: measured ac97 link rate at 47291 Hz, will use 48000 Hz
[ 2.1863588] audio0 at auich0: full duplex, playback, capture, mmap, independent
[ 2.1863588] auich0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
[ 2.1863588] auich0: Latency: 256 milliseconds
[ 2.1863588] acpiacad0: AC adapter online.
[ 2.1863588] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.1863588] uhub0: 2 ports with 2 removable, self powered
[ 2.1863588] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.1863588] uhub1: 2 ports with 2 removable, self powered
[ 2.1863588] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.1863588] uhub2: 2 ports with 2 removable, self powered
[ 2.2063672] IPsec: Initialized Security Association Processing.
[ 2.2163869] acpibat0: SANYO LION rechargeable battery
[ 2.2163869] acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
[ 5.1864052] wd0 at atabus0 drive 0
[ 5.1864052] wd0: <TOSHIBA MK4019GAX>
[ 5.1864052] wd0: drive supports 16-sector PIO transfers, LBA addressing
[ 5.1864052] wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
[ 5.7464146] wd0: 32-bit data port
[ 5.7464146] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[ 5.7464146] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[ 5.7464146] atapibus0 at atabus1: 2 targets
[ 5.7564156] cd0 at atapibus0 drive 0: <DW-28E, , 2.1A> cdrom removable
[ 5.7564156] cd0: 32-bit data port
[ 5.7564156] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[ 5.7564156] cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[ 6.1764204] boot device: wd0
[ 6.1764204] root on wd0a dumps on wd0b
[ 6.3064224] root file system type: ffs
[ 6.3164228] kern.module.path=/stand/i386/8.99.26/modules
[ 32.2168208] acpibat0: normal capacity on 'charge state'
[ 194.3793121] wsdisplay0: screen 1 added (80x25, vt100 emulation)
[ 194.3793121] wsdisplay0: screen 2 added (80x25, vt100 emulation)
[ 194.3893195] wsdisplay0: screen 3 added (80x25, vt100 emulation)
[ 194.3893195] wsdisplay0: screen 4 added (80x25, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index