Martin Husemann <martin%duskware.de@localhost> writes: > Is that uhci a companion of a xhci? Which version of sys/dev/usb/xhci.c > do you have and can you post a full dmesg please? No xhci in this system, no. The uhci usage here is serial communication with a Z-Wave device that implements ucom0, as seen in dmesg.boot: Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.14 (DEJAH) #67: Wed Apr 25 01:18:55 CEST 2018 root%barsoom.hamartun.priv.no@localhost:/usr/obj/sys/arch/amd64/compile.amd64/DEJAH total memory = 4083 MB avail memory = 3941 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Dell Inc. Latitude E6400 mainbus0 (root) ACPI: RSDP 0x00000000000FB9C0 000024 (v02 DELL ) ACPI: XSDT 0x00000000DF451E00 00006C (v01 DELL M09 27DD0604 ASL 00000061) ACPI: FACP 0x00000000DF451C9C 0000F4 (v04 DELL M09 27DD0604 ASL 00000061) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180313/tbfadt-642) ACPI: DSDT 0x00000000DF452400 006E14 (v02 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 0x00000000DF460C00 000040 ACPI: HPET 0x00000000DF451F00 000038 (v01 DELL M09 00000001 ASL 00000061) ACPI: ____ 0x00000000DF460400 000030 (v01 DELL M09 27DD0604 ASL 00000061) ACPI: APIC 0x00000000DF452000 000068 (v01 DELL M09 27DD0604 ASL 00000047) ACPI: ASF! 0x00000000DF451C00 00006A (v32 DELL M09 27DD0604 ASL 00000061) ACPI: MCFG 0x00000000DF451FC0 00003C (v16 DELL M09 27DD0604 ASL 00000061) ACPI: TCPA 0x00000000DF452300 000032 (v01 00000000 ASL 00000000) ACPI: SLIC 0x00000000DF45209C 000176 (v01 DELL M09 27DD0604 ASL 00000061) ACPI: SSDT 0x00000000DF4502EB 00066C (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: 2 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0 cpu0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, id 0x1067a cpu0: package 0, core 0, smt 0 cpu1 at mainbus0 apid 1 cpu1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, id 0x1067a cpu1: package 0, core 1, smt 0 acpi0 at mainbus0: Intel ACPICA 20180313 acpi0: X/RSDT: OemId <DELL , M09 ,27dd0604>, AslId <ASL ,00000061> acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFE401073FA990 0002C3 (v01 PmRef BspIst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFE4011ED85010 0005C6 (v01 PmRef BspCst 00003001 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFE4010740B010 0001D7 (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFFE4010742DA48 00008D (v01 PmRef ApCst 00003000 INTL 20050624) acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpiec0 at acpi0 (ECDV, PNP0C09-0): io 0x930,0x934 pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67 spkr0 at pcppi1: PC Speaker wsbell at spkr0 not configured midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 MB4 (PNP0C01) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured DIGC (PNP0501) at acpi0 not configured ECP (PNP0401) at acpi0 not configured TPM (BCM0102) at acpi0 not configured TCM (ZIC0101) at acpi0 not configured FTPM (PNP0C01) at acpi0 not configured acpivga0 at acpi0 (VID): ACPI Display Adapter acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device acpiout1: brightness levels: [0,6,13,20,26,33,40,46,53,60,66,73,80,86,93,100] acpiout2 at acpivga0 (DVI, 0x0112): ACPI Display Output Device acpiout3 at acpivga0 (DVI2, 0x0111): ACPI Display Output Device acpiout4 at acpivga0 (DP, 0x0113): ACPI Display Output Device acpiout5 at acpivga0 (DP2, 0x0114): ACPI Display Output Device acpivga0: connected output devices: acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0 acpivga0: 0x0110 (acpiout1): LCD Panel, head 0 acpivga0: 0x0111 (acpiout3): Unknown Output Device, head 0 acpivga0: 0x0112 (acpiout2): Unknown Output Device, head 0 acpivga0: 0x0113 (acpiout4): Unknown Output Device, head 0 acpivga0: 0x0114 (acpiout5): Unknown Output Device, head 0 MB2 (PNP0C01) at acpi0 not configured MB3 (PNP0C01) at acpi0 not configured MB1 (PNP0C01) at acpi0 not configured acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery acpibat0: Sanyo LION rechargeable battery acpibat0: granularity: low->warn 0.052 Ah, warn->full 0.052 Ah acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface wmidell0 at acpiwmi0: Dell WMI mappings version 1 ALS (ACPI0008) at acpi0 not configured acpitz0 at acpi0 (THM) acpitz0: levels: critical 107.0 C, passive cooling ACPI: Enabled 3 GPEs in block 00 to 3F pckbd0 at pckbc2 (kbd slot) pckbc2: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc2 (aux slot) pms0: Failed to initialize an ALPS device. pckbc2: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07) agp0 at pchb0: can't find internal VGA config space ppb0 at pci0 dev 1 function 0: vendor 8086 product 2a41 (rev. 0x07) ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok nouveau0 at pci1 dev 0 function 0: vendor 10de product 06eb (rev. 0xa1) drm kern info: nouveau [ DEVICE][nouveau0] BOOT0 : 0x298580a2 drm kern info: nouveau [ DEVICE][nouveau0] Chipset: G98 (NV98) drm kern info: nouveau [ DEVICE][nouveau0] Family : NV50 drm kern info: nouveau [ VBIOS][nouveau0] checking PRAMIN for image... drm kern info: nouveau [ VBIOS][nouveau0] ... appears to be valid drm kern info: nouveau [ VBIOS][nouveau0] using image from PRAMIN drm kern info: nouveau [ VBIOS][nouveau0] BIT signature found drm kern info: nouveau [ VBIOS][nouveau0] version 62.98.3c.00.01 nouveau0: interrupting at ioapic0 pin 16 (nouveau) drm kern info: nouveau [ PFB][nouveau0] RAM type: DDR2 drm kern info: nouveau [ PFB][nouveau0] RAM size: 256 MiB drm kern info: nouveau [ PFB][nouveau0] ZCOMP: 960 tags drm kern info: nouveau [ VOLT][nouveau0] GPU voltage: 900000uv drm kern info: nouveau [ PTHERM][nouveau0] FAN control: PWM drm kern info: nouveau [ PTHERM][nouveau0] fan management: automatic drm kern info: nouveau [ PTHERM][nouveau0] internal sensor: yes drm kern info: nouveau [ CLK][nouveau0] 03: core 169 MHz shader 338 MHz memory 100 MHz drm kern info: nouveau [ CLK][nouveau0] 05: core 275 MHz shader 550 MHz memory 250 MHz drm kern info: nouveau [ CLK][nouveau0] 07: core 500 MHz shader 1000 MHz memory 400 MHz drm kern info: nouveau [ CLK][nouveau0] 0f: core 580 MHz shader 1450 MHz memory 400 MHz drm kern info: nouveau [ CLK][nouveau0] --: core 275 MHz shader 550 MHz memory 249 MHz Zone kernel: Available graphics memory: 1149288 kiB drm kern info: nouveau [ DRM] VRAM: 256 MiB drm kern info: nouveau [ DRM] GART: 1048576 MiB drm kern info: nouveau [ DRM] TMDS table version 2.0 drm kern info: nouveau [ DRM] DCB version 4.0 drm kern info: nouveau [ DRM] DCB outp 00: 01000323 00010034 drm kern info: nouveau [ DRM] DCB outp 01: 02011300 00000028 drm kern info: nouveau [ DRM] DCB outp 02: 02022386 0f200010 drm kern info: nouveau [ DRM] DCB outp 03: 02022332 00020010 drm kern info: nouveau [ DRM] DCB outp 04: 040333a6 0f200010 drm kern info: nouveau [ DRM] DCB outp 05: 04033312 00020010 drm kern info: nouveau [ DRM] DCB conn 00: 00000041 drm kern info: nouveau [ DRM] DCB conn 01: 00000100 drm kern info: nouveau [ DRM] DCB conn 02: 00005246 drm kern info: nouveau [ DRM] DCB conn 03: 0000a346 drm: Supports vblank timestamp caching Rev 2 (21.10.2013). drm: Driver supports precise vblank timestamp query. drm kern info: nouveau [ DRM] MM: using M2MF for buffer copies nouveaufb0 at nouveau0 nouveau0: info: registered panic notifier nouveaufb0: framebuffer at 0xffff80006a430000, size 1440x900, depth 32, stride 5888 wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller (rev. 0x03) wm0: interrupting at msi0 vec 0 wm0: PCI-Express bus wm0: 2048 words FLASH wm0: Ethernet address 00:26:b9:cd:21:c2 wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT> makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03) uhci0: interrupting at ioapic0 pin 20 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03) uhci1: interrupting at ioapic0 pin 21 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03) uhci2: interrupting at ioapic0 pin 22 usb2 at uhci2: USB revision 1.0 ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03) ehci0: interrupting at ioapic0 pin 22 ehci0: EHCI version 1.0 ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2 usb3 at ehci0: USB revision 2.0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at msi1 vec 0 hdafg0 at hdaudio0: vendor 111d product 76b2 hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack] hdafg0: DAC01 2ch: Speaker [Jack] hdafg0: DIG02 2ch: SPDIF Out [Jack] hdafg0: 2ch/0ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: full duplex, playback, capture, mmap, independent hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 hdafg0: Latency: 128 milliseconds spkr1 at audio0: PC Speaker (synthesized) wsbell at spkr1 not configured ppb1 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03) ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s pci2 at ppb1 bus 11 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 28 function 1: vendor 8086 product 2942 (rev. 0x03) ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s pci3 at ppb2 bus 12 pci3: i/o space, memory space enabled, rd/line, wr/inv ok iwn0 at pci3 dev 0 function 0: vendor 8086 product 4235 (rev. 0x00) iwn0: interrupting at msi2 vec 0 iwn0: MIMO 3T3R, MoW, address 00:21:6a:ba:79:e2 iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ppb3 at pci0 dev 28 function 2: vendor 8086 product 2944 (rev. 0x03) ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s pci4 at ppb3 bus 13 pci4: i/o space, memory space enabled, rd/line, wr/inv ok ppb4 at pci0 dev 28 function 3: vendor 8086 product 2946 (rev. 0x03) ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s pci5 at ppb4 bus 14 pci5: i/o space, memory space enabled, rd/line, wr/inv ok uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03) uhci3: interrupting at ioapic0 pin 20 usb4 at uhci3: USB revision 1.0 uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03) uhci4: interrupting at ioapic0 pin 21 usb5 at uhci4: USB revision 1.0 uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03) uhci5: interrupting at ioapic0 pin 22 usb6 at uhci5: USB revision 1.0 ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03) ehci1: interrupting at ioapic0 pin 20 ehci1: EHCI version 1.0 ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5 usb7 at ehci1: USB revision 2.0 ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93) pci6 at ppb5 bus 3 pci6: i/o space, memory space enabled ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2917 (rev. 0x03) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer tco0 at ichlpcib0: TCO (watchdog) timer configured. tco0: Min/Max interval 1/367 seconds ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03) ahcisata0: interrupting at ioapic0 pin 19 ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef22ffe3<SXS,EMS,CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A> atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 atabus2 at ahcisata0 channel 4 atabus3 at ahcisata0 channel 5 ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2930 (rev. 0x03) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 lpt0 at isa0 port 0x378-0x37b irq 7 tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x200114e4 rev 0x30 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: FFH, lat 1 us, pow 500 mW acpicpu0: C3: FFH, lat 162 us, pow 100 mW, bus master check acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2801 MHz, turbo boost acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2800 MHz acpicpu0: P2: FFH, lat 10 us, pow 16607 mW, 2134 MHz acpicpu0: P3: FFH, lat 10 us, pow 15000 mW, 1600 MHz acpicpu0: P4: FFH, lat 10 us, pow 12000 mW, 800 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100 drm kern error: nouveau E[ PDISP][nouveau0] INVALID_STATE [UNK0B] chid 1 mthd 0x0080 data 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] Base 0: drm kern error: nouveau E[ PDISP][nouveau0] 0x0084: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0088: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x008c: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0090: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0094: 0x00000000 -> 0xcafe0000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00a0: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00a4: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00c0: 0x00000000 -> 0x01000003 drm kern error: nouveau E[ PDISP][nouveau0] 0x00c4: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00c8: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00cc: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00e0: 0x00000000 -> 0x40000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00e4: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00e8: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00ec: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x00fc: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0100: 0xfffe0000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0104: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0110: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0114: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] Base 0 - Image 0: drm kern error: nouveau E[ PDISP][nouveau0] 0x0800: 0x00000000 -> 0x00000600 drm kern error: nouveau E[ PDISP][nouveau0] 0x0804: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0808: 0x00000000 -> 0x038405a0 drm kern error: nouveau E[ PDISP][nouveau0] 0x080c: 0x00000000 -> 0x00101700 drm kern error: nouveau E[ PDISP][nouveau0] 0x0810: 0x0000e900 -> 0x0000cf00 drm kern error: nouveau E[ PDISP][nouveau0] Base 0 - Image 1: drm kern error: nouveau E[ PDISP][nouveau0] 0x0c00: 0x00000000 -> 0x00000600 drm kern error: nouveau E[ PDISP][nouveau0] 0x0c04: 0x00000000 drm kern error: nouveau E[ PDISP][nouveau0] 0x0c08: 0x00000000 -> 0x038405a0 drm kern error: nouveau E[ PDISP][nouveau0] 0x0c0c: 0x00000000 -> 0x00101700 drm kern error: nouveau E[ PDISP][nouveau0] 0x0c10: 0x0000e900 -> 0x0000cf00 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 acpiacad0: AC adapter online. IPsec: Initialized Security Association Processing. uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhub5 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered uhub6 at usb6: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub6: 2 ports with 2 removable, self powered uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub7: 6 ports with 6 removable, self powered ahcisata0 port 0: device present, speed: 3.0Gb/s ahcisata0 port 1: device present, speed: 1.5Gb/s ehci1: handing over full speed device on port 1 to uhci3 wd0 at atabus0 drive 0 wd0: <ST9250410ASG> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) atapibus0 at atabus1: 1 targets cd0 at atapibus0 drive 0: <PLDS DVD+/-RW DU-8A3S, 911100494545, KD01> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) ehci1: handing over full speed device on port 2 to uhci3 uhub8 at uhub3 port 3: vendor 413c (0x413c) product 2513 (0x2513), class 9/0, rev 2.00/a0.05, addr 2 uhub8: multiple transaction translators uhub8: 3 ports with 3 removable, self powered umodem0 at uhub4 port 1 configuration 1 interface 0 umodem0: vendor 0658 (0x658) product 0200 (0x200), rev 2.00/0.00, addr 2, iclass 2/2 umodem0: data interface 1, has no CM over data, has no break umodem0: status change notification available ucom0 at umodem0 uhub9 at uhub3 port 4: vendor 413c (0x413c) product 2513 (0x2513), class 9/0, rev 2.00/a0.05, addr 3 uhub9: multiple transaction translators uhub9: 3 ports with 3 removable, self powered uftdi0 at uhub4 port 2 configuration 1 interface 0 uftdi0: RFXCOM (0x403) RFXtrx433 (0x6001), rev 2.00/6.00, addr 3 ucom1 at uftdi0 portno 1 ehci0: handing over full speed device on port 5 to uhci2 WARNING: 3 errors while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/amd64/8.99.14/modules ugen0 at uhub2 port 1 ugen0: Broadcom Corp (0xa5c) 5880 (0x5800), rev 1.10/1.01, addr 2 acpibat0: normal capacity on 'charge state' iwn0: radio is disabled by hardware switch iwn0: cannot assign link-local address iwn0: radio is disabled by hardware switch iwn0: radio is disabled by hardware switch iwn0: cannot assign link-local address iwn0: radio is disabled by hardware switch wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation) -tih -- Most people who graduate with CS degrees don't understand the significance of Lisp. Lisp is the most important idea in computer science. --Alan Kay
Attachment:
signature.asc
Description: PGP signature