Hi I have an amd64 box which runs great with NetBSD 6.0. However, NetBSD 7 BETA does only boot with both ACPI and SMP (this is a single core box) disabled. -If I boot normally, it hangs quite early at the ACPI stuff. -If I boot with ACPI disabled, the disk controller complains about "lost interrupts". I have attached pictures of both problems as well as the dmesg output of NetBSD 6, the output of dmidecode and the output of acpidecode -dt.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0 (GENERIC)
total memory = 2047 MB
avail memory = 1973 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MICRO-STAR INTERNATIONAL CO., LTD MS-7100 (1.0)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Athlon(tm) 64 Processor 3700+, id 0x20f71
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MBIO (PNP0C02) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
EXPL (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 50.0C
acpitz0: levels: critical 96.8 C, passive 50.0 C
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x0050 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0052 (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
APCF: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa3)
APCL: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 6 function 0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
APSI: Picked IRQ 22 with weight 0
viaide1: using ioapic0 pin 22 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
APSJ: Picked IRQ 23 with weight 0
viaide2: using ioapic0 pin 23 for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ath0 at pci1 dev 7 function 0: Atheros 2413
APC2: Picked IRQ 17 with weight 0
ath0: interrupting at ioapic0 pin 17
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 7.8 phy 4.5 radio 5.6
fwohci0 at pci1 dev 12 function 0: vendor 0x1106 product 0x3044 (rev. 0x46)
APC4: Picked IRQ 19 with weight 0
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:10:dc:00:00:78:62:04
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x1102 product 0x0007 (audio multimedia) at pci1 dev 13 function 0 not configured
nfe0 at pci0 dev 10 function 0: vendor 0x10de product 0x0057 (rev. 0xa3)
APCH: Picked IRQ 20 with weight 1
nfe0: interrupting at ioapic0 pin 20
nfe0: Ethernet address 00:11:09:d3:43:9b
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci2 dev 0 function 0, Yukon-2 EC rev. A2 (0x1): ioapic0 pin 17
msk0 at mskc0 port A: Ethernet address 00:11:09:d3:43:9a
makphy1 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
siisata0 at pci3 dev 0 function 0: vendor 0x1095 product 0x3132 (rev. 0x01)
APC1: Picked IRQ 16 with weight 0
siisata0: interrupting at ioapic0 pin 16
siisata0: SiI3132, 3.0Gb/s
atabus6 at siisata0 channel 0
atabus7 at siisata0 channel 1
ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci5 dev 0 function 0: vendor 0x1002 product 0x7244 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon X1950
radeondrm0: Initialized radeon 1.29.0 20080613
vendor 0x1002 product 0x7264 (miscellaneous display) at pci5 dev 0 function 1 not configured
pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb3 at pci0 dev 24 function 3: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <IDE DVD-ROM 16X, , V3.10> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
viaide1 port 0: device present, speed: 1.5Gb/s
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Fujitsu Siemens Computers Fujitsu Siemens Computers USB-Keyboard (rf) v1.0, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Fujitsu Siemens Computers Fujitsu Siemens Computers USB-Keyboard (rf) v1.0, rev 1.10/0.01, addr 2, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output=0, feature=0
uhidev2 at uhub0 port 2 configuration 1 interface 0
uhidev2: Microsoft Corporation Microsoft M-BM-. Laser Mouse 6000, rev 2.00/1.01, addr 3, iclass 3/1
ums0 at uhidev2: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
atapibus1 at atabus1: 2 targets
cd1 at atapibus1 drive 0: <PHILIPS DVDR1648P1, DM100527039573, P1.1> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus2 drive 0
wd0: <ST3250623NS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ath0: device timeout (txq 1, txintrperiod 5)
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R520 Microcode
info: [drm] Num pipes: 4
info: [drm] writeback test succeeded in 1 usecs
APC3: Picked IRQ 18 with weight 0
radeondrm0: interrupting at ioapic0 pin 18
ath0: deleting keyix 1 w/o power
ath0: device timeout (txq 1, txintrperiod 4)
ath0: device timeout (txq 1, txintrperiod 3)
ath0: device timeout (txq 1, txintrperiod 2)
Attachment:
acpi.jpg
Description: JPEG image
Attachment:
lostirq.jpg
Description: JPEG image
# dmidecode 2.12 SMBIOS 2.3 present. 39 structures occupying 1193 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 04/10/2006 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: MS-7100 Version: 1.0 Serial Number: UUID: Not Present Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: MS-7100 Version: 1.0 Serial Number: Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: Socket 939 Type: Central Processor Family: Athlon 64 Manufacturer: AMD ID: 71 0F 02 00 FF FB 8B 07 Signature: Family 15, Model 39, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: AMD Athlon(tm) 64 Processor 3700+ Voltage: 1.4 V External Clock: 201 MHz Max Speed: 3000 MHz Current Speed: 2211 MHz Status: Populated, Enabled Upgrade: Socket 939 L1 Cache Handle: 0x000A L2 Cache Handle: 0x000C L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 24 bytes Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 4096 MB Maximum Total Memory Size: 16384 MB Supported Speeds: 70 ns 60 ns 50 ns Supported Memory Types: Standard DIMM Memory Module Voltage: 2.9 V Associated Memory Slots: 4 0x0006 0x0007 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 5 ns Type: Unknown EDO Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A1 Bank Connections: 2 3 Current Speed: 5 ns Type: Unknown EDO Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: A2 Bank Connections: None Current Speed: 5 ns Type: Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: A3 Bank Connections: None Current Speed: 5 ns Type: Unknown EDO Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x000A, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000B, DMI type 7, 19 bytes Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x0015, DMI type 9, 13 bytes System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0016, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0018, DMI type 9, 13 bytes System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Long ID: 4 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0019, DMI type 9, 13 bytes System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 5 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001A, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x001B, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 16 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x001C, DMI type 17, 27 bytes Memory Device Array Handle: 0x001B Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001D, DMI type 17, 27 bytes Memory Device Array Handle: 0x001B Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001E, DMI type 17, 27 bytes Memory Device Array Handle: 0x001B Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001F, DMI type 17, 27 bytes Memory Device Array Handle: 0x001B Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: A3 Bank Locator: Bank6/7 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0020, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x001B Partition Width: 1 Handle 0x0021, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x001C Memory Array Mapped Address Handle: 0x0020 Partition Row Position: 1 Handle 0x0022, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x0020 Partition Row Position: 1 Handle 0x0023, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001E Memory Array Mapped Address Handle: 0x0020 Partition Row Position: 1 Handle 0x0024, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001F Memory Array Mapped Address Handle: 0x0020 Partition Row Position: 1 Handle 0x0025, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x0026, DMI type 127, 4 bytes End Of Table
Attachment:
acpidump.txt.gz
Description: GNU Zip compressed data
