Current-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: HEADS UP: riastradh-drm2 branch merged



Hi,

I wrote a small patch to be i915drmkms as a console.
If you want a compiled kernel, get from
http://ftp.netbsd.org/pub/NetBSD/misc/nonaka/drmkms/drmkms.bz2

Index: sys/dev/pci/hdaudio/hdafg.c
===================================================================
RCS file: /cvsroot/src/sys/dev/pci/hdaudio/hdafg.c,v
retrieving revision 1.18
diff -u -r1.18 hdafg.c
--- sys/dev/pci/hdaudio/hdafg.c    16 Oct 2013 18:13:00 -0000    1.18
+++ sys/dev/pci/hdaudio/hdafg.c    24 Mar 2014 15:33:58 -0000
@@ -4263,7 +4263,9 @@
             for (j = 0; j < HDAUDIO_MAXPINS; j++) {
                 if (as[i].as_pins[j] == 0)
                     continue;
+#if 0    /* XXX */
                 hdafg_assoc_dump_dd(sc, &as[i], j);
+#endif
             }
         }
         break;
Index: sys/external/bsd/drm2/i915drm/i915_pci.c
===================================================================
RCS file: /cvsroot/src/sys/external/bsd/drm2/i915drm/i915_pci.c,v
retrieving revision 1.2
diff -u -r1.2 i915_pci.c
--- sys/external/bsd/drm2/i915drm/i915_pci.c    18 Mar 2014 18:20:42
-0000    1.2
+++ sys/external/bsd/drm2/i915drm/i915_pci.c    24 Mar 2014 15:33:58 -0000
@@ -416,7 +416,7 @@
         goto fail3;
     }

-    prop_dictionary_set_bool(dict, "is_console", 0); /* XXX */
+    prop_dictionary_set_bool(dict, "is_console", true /*0*/); /* XXX
*/ /*NONAKA*/
     prop_dictionary_set_uint32(dict, "width", mode_cmd.width);
     prop_dictionary_set_uint32(dict, "height", mode_cmd.height);
     prop_dictionary_set_uint8(dict, "depth", sizes->surface_bpp);
@@ -431,6 +431,11 @@
     genfb_ops.genfb_mmap = i915drm_genfb_mmap;

     /* XXX errno NetBSD->Linux */
+#if 1 /* XXX NONAKA */
+    extern int vga_cndetach(void);
+    vga_cndetach();
+    wsdisplay_cndetach();
+#endif /* XXX NONAKA */
     ret = -genfb_attach(&sc->sc_genfb, &genfb_ops);
     if (ret) {
         aprint_error_dev(sc->sc_dev, "unable to attach genfb: %d\n",


Regards,
-- 
NONAKA Kimihiro
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.37 (DRMKMS) #24: Tue Mar 25 00:39:37 JST 2014
        nonaka@koharu.myhome.local:/usr/obj.amd64/sys/arch/amd64/compile/DRMKMS
total memory = 16261 MB
avail memory = 15773 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
NEC Express5800/S70 [N8100-9023] (FR1.0)
mainbus0 (root)
ACPI: RSDP 0xf0490 000024 (v02 ALASKA)
ACPI: XSDT 0xda1c0078 000074 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 0xda1c8a18 0000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 0xda1c0180 008895 (v02 ALASKA    A M I 00000002 INTL 20051117)
ACPI: FACS 0xda36af80 000040
ACPI: APIC 0xda1c8b10 000072 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FPDT 0xda1c8b88 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: MCFG 0xda1c8bd0 00003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: HPET 0xda1c8c10 000038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
ACPI: SSDT 0xda1c8c48 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0xda1c8fb8 000968 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0xda1c9920 000A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0xda1ca3b8 0000B8 (v01 INTEL      SNB  00000001 INTL 00000001)
ACPI: ASF! 0xda1ca470 0000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-3475S CPU @ 2.90GHz, id 0x306a9
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-3475S CPU @ 2.90GHz, id 0x306a9
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5-3475S CPU @ 2.90GHz, id 0x306a9
cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i5-3475S CPU @ 2.90GHz, id 0x306a9
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
ACPI: SSDT 0xda1ec018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x0 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0xda1eda98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 0xda1f7c18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
FWHD (INT0800) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
LDRC (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
SIO1 (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
UAR1 (PNP0501) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
RMSC (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 
85 90 95 100
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) WARNING: module error: vfs load failed for `acpiverbose', error 
45
at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 93.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 104.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 104.0 C, passive 104.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] 
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20131218/hwxface-646)
WARNING: module error: vfs load failed for `acpiverbose', error 45
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Ivy Bridge Host Bridge (rev. 0x09)
ppb0 at pci0 dev 1 function 0: Intel product 0x0151 (rev. 0x09)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> x16 @ 8.0Gb/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Altera EP4CGX15BF14C8N (miscellaneous multimedia, revision 0x01) at pci1 dev 0 
function 0 not configured
i915drmkms0 at pci0 dev 2 function 0: Intel Ivy Bridge Integrated Graphics 
Device (rev. 0x09)
drmkms0 at i915drmkms0
drm kern debug: [drm:i915_dump_device_info], i915 device info: gen=7, 
pciid=0x0162 
flags=need_gfx_hws,is_ivybridge,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,drm:
 Memory usable by graphics device = 2048M
drm kern debug: [drm:i915_gem_gtt_init], GMADR size = 256M
drm kern debug: [drm:i915_gem_gtt_init], GTT stolen size = 0M
drm kern debug: [drm:drm_addmap_core], offset = 0xf7800000, size = 0x00200000, 
type = 1
drm: MTRR allocation failed.  Graphics performance may suffer.
drm kern debug: [drm:intel_detect_pch], Found PatherPoint PCH
drm kern debug: [drm:intel_opregion_setup], graphic opregion physical addr: 
0xda366018
drm kern debug: [drm:intel_opregion_setup], SWSCI supported
drm: Supports vblank timestamp caching Rev 1 (10.10.2010).
drm: Driver supports precise vblank timestamp query.
drm kern debug: [drm:init_vbt_defaults], Set default to SSC at 100MHz
i915drmkms0: unable to map ROM
drm: failed to find VBIOS tables
drm kern debug: [drm:intel_modeset_init], 3 display pipes available.
i915drmkms0: unable to map VGA registersdrm kern debug: 
[drm:intel_dp_i2c_init], i2c_init DPDDC-D
drm kern debug: [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
drm kern debug: [drm:intel_dp_i2c_aux_ch], aux_ch failed -60
drm kern debug: [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
drm kern debug: [drm:intel_dp_i2c_aux_ch], aux_ch failed -60
drm kern debug: [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0 
has_pch_edp 0 has_cpu_edp 0 has_ck505 0
drm kern debug: [drm:ironlake_init_pch_refclk], Disabling SSC entirely
drm kern debug: [drm:init_status_page], render ring hws offset: 0x00000000
drm kern debug: [drm:init_status_page], bsd ring hws offset: 0x00022000
drm kern debug: [drm:init_status_page], blitter ring hws offset: 0x00043000
drm kern debug: [drm:create_default_context], Default HW context loaded
drm kern debug: [drm:i915_gem_context_init], HW context support initialized
drm kern debug: [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: 
enabled
drm kern debug: [drm:intel_modeset_setup_hw_state], [CRTC:5] hw state readout: 
disabled
drm kern debug: [drm:intel_modeset_setup_hw_state], [CRTC:7] hw state readout: 
disabled
drm kern debug: [drm:intel_modeset_setup_hw_state], [ENCODER:10:DAC-10] hw 
state readout: disabled, pipe=0
drm kern debug: [drm:intel_modeset_setup_hw_state], [ENCODER:11:TMDS-11] hw 
state readout: enabled, pipe=0
drm kern debug: [drm:intel_modeset_setup_hw_state], [ENCODER:15:TMDS-15] hw 
state readout: disabled, pipe=0
drm kern debug: [drm:intel_modeset_setup_hw_state], [CONNECTOR:9:VGA-1] hw 
state readout: disabled
drm kern debug: [drm:intel_modeset_setup_hw_state], [CONNECTOR:12:HDMI-A-1] hw 
state readout: enabled
drm kern debug: [drm:intel_modeset_setup_hw_state], [CONNECTOR:16:DP-1] hw 
state readout: disabled
drm kern debug: [drm:intel_connector_check_state], [CONNECTOR:12:HDMI-A-1]
drm kern debug: [drm:intel_modeset_check_state], [ENCODER:10:DAC-10]
drm kern debug: [drm:intel_modeset_check_state], [ENCODER:11:TMDS-11]
drm kern debug: [drm:intel_modeset_check_state], [ENCODER:15:TMDS-15]
drm kern debug: [drm:intel_modeset_check_state], [CRTC:3]
drm kern debug: [drm:intel_modeset_check_state], [CRTC:5]
drm kern debug: [drm:intel_modeset_check_state], [CRTC:7]
drm kern debug: [drm:intel_crt_reset], pch crt adpa set to 0xf40000
drm kern debug: [drm:drm_irq_install], irq=268570635
drmkms0: interrupting at ioapic0 pin 16 (i915)
xhci0 at pci0 dev 20 function 0: Intel 7 Series USB xHCI (rev. 0x04)
csr: 02900006
xhci0: interrupting at ioapic0 pin 16
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 2.0
Intel 7 Series MEI Controller (miscellaneous communications, revision 0x04) at 
pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 7 Series KT (com)
com2 at puc0 port 0: ioaddr 0xf0e0, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address d4:3d:7e:0a:9d:d8
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb1 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek ALC887
hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 
PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0: Intel product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg_dd_parse_info: datalen=83
 ack!
hdafg1: failed to parse ELD data
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb1 at pci0 dev 28 function 0: Intel 7 Series PCIE (rev. 0xc4)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x4 @ 5.0Gb/s
ppb1: link is x1 @ 2.5Gb/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Altera EP4CGX15BF14C8N (miscellaneous multimedia, revision 0x01) at pci2 dev 0 
function 0 not configured
ehci1 at pci0 dev 29 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb2 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xa4)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: Intel C216 LPC (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: Intel 7 Series (desktop) SATA Controller 
(AHCI) (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 
0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: Intel 7 Series SMBus Controller (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbc: cmd word write error
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  59 us, pow   500 mW
acpicpu0: C3: FFH, lat  80 us, pow   350 mW
acpicpu0: P0: FFH, lat  10 us, pow 65000 mW, 2901 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 65000 mW, 2900 MHz
acpicpu0: P2: FFH, lat  10 us, pow 61690 mW, 2800 MHz
acpicpu0: P3: FFH, lat  10 us, pow 59079 mW, 2700 MHz
acpicpu0: P4: FFH, lat  10 us, pow 55888 mW, 2600 MHz
acpicpu0: P5: FFH, lat  10 us, pow 53380 mW, 2500 MHz
acpicpu0: P6: FFH, lat  10 us, pow 50305 mW, 2400 MHz
acpicpu0: P7: FFH, lat  10 us, pow 47907 mW, 2300 MHz
acpicpu0: P8: FFH, lat  10 us, pow 44946 mW, 2200 MHz
acpicpu0: P9: FFH, lat  10 us, pow 42638 mW, 2100 MHz
acpicpu0: P10: FFH, lat  10 us, pow 39789 mW, 2000 MHz
acpicpu0: P11: FFH, lat  10 us, pow 37578 mW, 1900 MHz
acpicpu0: P12: FFH, lat  10 us, pow 35419 mW, 1800 MHz
acpicpu0: P13: FFH, lat  10 us, pow 32733 mW, 1700 MHz
acpicpu0: P14: FFH, lat  10 us, pow 30661 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2893532240 Hz quality 3000
drm kern debug: [drm:drm_helper_probe_single_connector_modes], 
[CONNECTOR:9:VGA-1]
drm kern debug: [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect 
cycle: adpa=0xf40000
drm kern debug: [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug 
adpa=0xf40000, result 0
drm kern debug: [drm:intel_crt_detect], CRT not detected via hotplug
drm kern debug: [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
drm kern debug: [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter 
i915 gmbus vga
drm kern debug: [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry 
using GPIO bit-banging
drm kern debug: [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus 
vga. force bit now 1
drm kern debug: [drm:intel_gmbus_force_bit], disabling bit-banging on i915 
gmbus vga. force bit now 0
drm kern debug: [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no 
valid EDID found]
drm kern debug: [drm:drm_helper_probe_single_connector_modes], 
[CONNECTOR:9:VGA-1] disconnected
drm kern debug: [drm:drm_helper_probe_single_connector_modes], 
[CONNECTOR:12:HDMI-A-1]
drm kern debug: [drm:drm_detect_monitor_audio], Monitor has basic audio support
drm kern debug: [drm:drm_edid_to_eld], ELD monitor MDT242WG
drm kern debug: [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, 
latency present 0 0, video latency 0 0, audio latency 0 0
drm kern debug: [drm:drm_edid_to_eld], ELD size 8, SAD count 1
drm kern debug: [drm:drm_helper_probe_single_connector_modes], 
[CONNECTOR:12:HDMI-A-1] probed modes :
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 59:"1920x1080" 60 
148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 19:"1920x1200" 60 
154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 66:"1920x1080i" 50 
74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 60:"1920x1080i" 60 
74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 27:"1600x1200" 60 
162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 29:"1680x1050" 60 
119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 58:"1680x945" 60 
131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 53:"1400x1050" 75 
156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 52:"1400x1050" 60 
101000 1400 1448 1480 1560 1050 1053 1057 1080 0x40 0x9
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 57:"1600x900" 60 
118963 1600 1696 1864 2128 900 901 904 932 0x0 0x6
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 36:"1280x1024" 75 
135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x1024" 60 
108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 54:"1440x900" 75 
136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 28:"1440x900" 60 
88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 50:"1280x960" 60 
108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 56:"1366x768" 60 
85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 51:"1360x768" 60 
85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 49:"1280x800" 75 
106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 48:"1280x800" 60 
71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 43:"1152x864" 75 
108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x768" 75 
102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 46:"1280x768" 60 
68250 1280 1328 1360 1440 768 771 778 790 0x40 0x9
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 70:"1280x720" 50 
74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 62:"1280x720" 60 
74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 68:"1440x576i" 50 
27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 75 
78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 38:"1024x768" 70 
75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 
65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 64:"1440x480i" 60 
27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 55:"1024x576" 60 
46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 40:"832x624" 75 
57284 832 864 928 1152 624 625 628 667 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 42:"800x600" 72 
50000 800 856 976 1040 600 637 643 666 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 41:"800x600" 75 
49500 800 816 896 1056 600 601 604 625 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 30:"800x600" 60 
40000 800 840 968 1056 600 601 605 628 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 44:"800x600" 56 
36000 800 824 896 1024 600 601 603 625 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 69:"720x576" 50 
27000 720 732 796 864 576 581 586 625 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 45:"848x480" 60 
33750 848 864 976 1088 480 486 494 517 0x40 0x5
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 63:"720x480" 60 
27000 720 736 798 858 480 489 495 525 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 73 
31500 640 664 704 832 480 489 491 520 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 31:"640x480" 75 
31500 640 656 720 840 480 481 484 500 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 67 
30240 640 704 768 864 480 483 486 525 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 
25200 640 656 752 800 480 490 492 525 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 65:"640x480" 60 
25175 640 656 752 800 480 490 492 525 0x40 0xa
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 
28320 720 738 846 900 400 412 414 449 0x40 0x6
drm kern debug: [drm:drm_helper_probe_single_connector_modes], 
[CONNECTOR:16:DP-1]
drm kern debug: [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
drm kern debug: [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
drm kern debug: [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
drm kern debug: [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00
drm kern debug: [drm:drm_helper_probe_single_connector_modes], 
[CONNECTOR:16:DP-1] disconnected
drm kern debug: [drm:drm_setup_crtcs], 
drm kern debug: [drm:drm_enable_connectors], connector 9 enabled? no
drm kern debug: [drm:drm_enable_connectors], connector 12 enabled? yes
drm kern debug: [drm:drm_enable_connectors], connector 16 enabled? no
drm kern debug: [drm:drm_target_preferred], looking for cmdline mode on 
connector 12
drm kern debug: [drm:drm_target_preferred], looking for preferred mode on 
connector 12
drm kern debug: [drm:drm_target_preferred], found mode 1920x1080
drm kern debug: [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
drm kern debug: [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
i915drmkms0: framebuffer at 0xffff80011d145000, size 1920x1080, depth 32, 
stride 7680
wsdisplay0 at i915drmkms0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm kern debug: [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x 
y) (0 0)
drm kern debug: [drm:intel_set_config_compute_mode_changes], crtc has no fb, 
full mode set
drm kern debug: [drm:intel_set_config_compute_mode_changes], modes are 
different, full mode set
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 
0 0 0 0x0 0x0
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080" 60 
148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
drm kern debug: [drm:intel_modeset_stage_output_state], [CONNECTOR:12:HDMI-A-1] 
to [CRTC:3]
drm kern debug: [drm:intel_crtc_set_config], attempting to set mode from 
userspace
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080" 60 
148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
drm kern debug: [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 
1, disable: 0
drm kern debug: [drm:intel_modeset_adjusted_mode], [CRTC:3]
drm kern debug: [drm:drm_calc_vbltimestamp_from_scanoutpos], crtc 0: Noop due 
to uninitialized mode.
hdafg1: unsol: display device hotplug
drm kern debug: [drm:ivb_modeset_global_resources], disabling fdi C rx
drm kern debug: [drm:drm_vblank_get], enabling vblank on crtc 0, ret: -22
drm kern debug: [drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
drm kern debug: [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max 
display bpc 8)
drm kern debug: [drm:ironlake_crtc_mode_set], Mode for pipe 0:
drm kern debug: [drm:drm_mode_debug_printmodeline], Modeline 18:"1920x1080" 60 
148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
drm kern debug: [drm:intel_get_pch_pll], CRTC:3 allocated PCH PLL c6014
drm kern debug: [drm:intel_get_pch_pll], using pll 0 for pipe 0
drm kern debug: [drm:intel_get_pch_pll], switching PLL c6014 off
drm kern debug: [drm:ironlake_check_fdi_lanes], checking fdi config on pipe 0, 
lanes 2
drm kern debug: [drm:ironlake_wait_for_vblank], vblank wait timed out
drm kern debug: [drm:ironlake_update_plane], Writing base 00073000 00000000 0 0 
7680
drm kern debug: [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set 
[MODE:18:1920x1080]
drm kern debug: [drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe A
drm kern debug: [drm:intel_write_eld], ELD on [CONNECTOR:12:HDMI-A-1], 
[ENCODER:11:TMDS-11]
drm kern debug: [drm:ironlake_write_eld], ELD on pipe A
drm kern debug: [drm:ironlake_write_eld], Audio directed to unknown port
drm kern debug: [drm:ironlake_write_eld], ELD size 8
drm kern debug: [drm:ivybridge_update_wm], FIFO watermarks For pipe A - plane 
14, cursor: 6
drm kern debug: [drm:ironlake_check_srwm], hdafg1: unsol: tag=3
watermark 1: display plane 21, fbc lines 3, cursor 6
drm kern debug: [drm:ironlake_check_srwm], watermark 2: display plane 77, fbc 
lines 3, cursor 6
drm kern debug: [drm:ironlake_check_srwm], watermark 3: display plane 151, fbc 
lines 4, cursor 10
drm kern debug: [drm:ironlake_check_srwm], watermark 3: display plane 299, fbc 
lines 5, cursor 14
drm kern debug: [drm:ironlake_wait_for_vblank], vblank wait timed out
drm kern debug: [drm:ironlake_wait_for_vblank], vblank wait timed out
drm kern debug: [drm:ivb_manual_fdi_link_train], FDI_RX_IIR before link train 
0x700
drm kern debug: [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x700
drm kern debug: [drm:ivb_manual_fdi_link_train], FDI train 1 done, level 0.
drm kern debug: [drm:ivb_manual_fdi_link_train], FDI_RX_IIR 0x600
drm kern debug: [drm:ivb_manual_fdi_link_train], FDI train 2 done, level 0.
drm kern debug: [drm:ivb_manual_fdi_link_train], FDI train done.
drm kern debug: [drm:ironlake_enable_pch_pll], enable PCH PLL c6014 (active 0, 
on? 0)for crtc 3
drm kern debug: [drm:ironlake_enable_pch_pll], enabling PCH PLL c6014
drm kern debug: [drm:drm_calc_timestamping_constants], crtc 3: hwmode: htotal 
2200, vtotal 1125, vdisplay 1080
drm kern debug: [drm:drm_calc_timestamping_constants], crtc 3: clock 148500 kHz 
framedur 16665750 linedur 14814, pixeldur 6
drm kern debug: [drm:intel_connector_check_state], [CONNECTOR:12:HDMI-A-1]
drm kern debug: [drm:intel_modeset_check_state], [ENCODER:10:DAC-10]
drm kern debug: [drm:intel_modeset_check_state], [ENCODER:11:TMDS-11]
drm kern debug: [drm:intel_modeset_check_state], [ENCODER:15:TMDS-15]
drm kern debug: [drm:intel_modeset_check_state], [CRTC:3]
drm kern debug: [drm:intel_modeset_check_state], [CRTC:5]
drm kern debug: [drm:intel_modeset_check_state], [CRTC:7]
drm kern debug: [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
drm kern debug: [drm:intel_modeset_stage_output_state], [CONNECTOR:12:HDMI-A-1] 
to [CRTC:3]
drm kern debug: [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
drm kern debug: [drm:intel_modeset_stage_output_state], [CONNECTOR:12:HDMI-A-1] 
to [CRTC:3]
drmkms0: info: registered panic notifier
uhub0 at usb0: NetBSD xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 4: device present, speed: 1.5Gb/s
drm kern debug: [drm:intel_enable_rc6], RC6 and deep RC6 enabled
drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
wd0 at atabus0 drive 0
wd0: <ST500NM0011>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 968813 cyl, 16 head, 63 sec, 512 bytes/sect x 976563504 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD20EARX-00PASB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: GPT GUID: 57256df8-479e-4b05-88cc-e92df365f87c
dk0 at wd1: movie
dk0: 3905028096 blocks at 2000896, type: 
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
atapibus0 at atabus4: 1 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ8A0AS, HP10  002946, 1.40> cdrom 
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, 
addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub4 at uhub2 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, 
addr 2
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: Sony Storage Media, rev 2.10/a.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Sony, Storage Media, 1.00> disk removable
sd0: fabricating a geometry
sd0: 7520 MB, 7520 cyl, 64 head, 32 sec, 512 bytes/sect x 15400960 sectors
ugen0 at uhub4 port 1
ugen0: NTT Communications Corp. SCR3310-NTTCom USB SmartCard Reader, rev 
2.00/2.03, addr 3
sd0: fabricating a geometry
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint, rev 
1.10/1.27, addr 4, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
uhidev1 at uhub4 port 5 configuration 1 interface 0
uhidev1: OMRON BY50S, rev 1.10/1.08, addr 4, iclass 3/0
uhid0 at uhidev1: input=64, output=16, feature=0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev2 at uhub3 port 2 configuration 1 interface 1
uhidev2: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint, rev 
1.10/1.27, addr 4, iclass 3/0
uhidev2: 4 report ids
ums0 at uhidev2 reportid 1: 3 buttons
wsmouse0 at ums0 mux 0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=1, feature=0
uhid3 at uhidev2 reportid 4: input=0, output=0, feature=4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
dump_misc_init: max_paddr = 0x41e600000
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)


Home | Main Index | Thread Index | Old Index