Re: BCM57781 is not supported

To: Jeff Rizzo <riz%netbsd.org@localhost>
Subject: Re: BCM57781 is not supported
From: Andrius V <vezhlys%gmail.com@localhost>
Date: Wed, 25 Apr 2012 19:51:03 +0300
NetBSD dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (GENERIC)
total memory = 8144 MB
avail memory = 7892 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu1 at mainbus0 apid 2: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu2 at mainbus0 apid 4: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu3 at mainbus0 apid 6: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu4 at mainbus0 apid 1: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu5 at mainbus0 apid 3: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu6 at mainbus0 apid 5: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
cpu7 at mainbus0 apid 7: Genuine Intel(R) CPU  @ 3.00GHz, id 0x206d2
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfec01000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
IOH (PNP0C01) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
PCH (PNP0C01) at acpi0 not configured
CWDT (INT3F0D) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
PTMD (INT3394) at acpi0 not configured
SCK0 (ACPI0004) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x02)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x02)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x02)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x1002 product 0x9588 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon HD 2600 XT
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci2 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic1 pin 12
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 48000Hz PCM16 AC3
ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x02)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x3c28 (miscellaneous system, revision 0x02) at
pci0 dev 5 function 0 not configured
vendor 0x8086 product 0x3c2a (miscellaneous system, revision 0x02) at
pci0 dev 5 function 2 not configured
vendor 0x8086 product 0x3c2c (interrupt system, interface 0x20,
revision 0x02) at pci0 dev 5 function 4 not configured
ppb3 at pci0 dev 17 function 0: vendor 0x8086 product 0x1d3e (rev. 0x05)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1d3a (miscellaneous communications, revision
0x05) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg1 at hdaudio1: Realtek product 0899
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16
PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
ppb4 at pci0 dev 28 function 0: vendor 0x8086 product 0x1d10 (rev. 0xb5)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 1: vendor 0x8086 product 0x1d12 (rev. 0xb5)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1b21 product 0x1042 (USB serial bus, interface 0x30) at pci6
dev 0 function 0 not configured
ppb6 at pci0 dev 28 function 2: vendor 0x8086 product 0x1d14 (rev. 0xb5)
ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci7 dev 0 function 0: Broadcom BCM57781 Fast Ethernet
bge0: interrupting at ioapic0 pin 18
bge0: adjust device control 0x192c00 -> 0x195c00
bge0: ASIC unknown BCM57765 (0x57785100), Ethernet address bc:5f:f4:0e:84:25
bge0: setting short Tx thresholds
ukphy0 at bge0 phy 1: OUI 0x001be9, model 0x0024, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb7 at pci0 dev 28 function 3: vendor 0x8086 product 0x1d16 (rev. 0xb5)
ppb7: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0 at pci8 dev 0 function 0: vendor 0x1106 product 0x3403 (rev. 0x01)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:8f:13:00:a6:8f:10:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ppb8 at pci0 dev 28 function 4: vendor 0x8086 product 0x1d18 (rev. 0xb5)
ppb8: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1b21 product 0x1042 (USB serial bus, interface 0x30) at pci9
dev 0 function 0 not configured
ppb9 at pci0 dev 28 function 5: vendor 0x8086 product 0x1d1a (rev. 0xb5)
ppb9: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci10 dev 0 function 0: vendor 0x1b21 product 0x0612 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 17
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP
0xeb32ffa1<SXS,CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1d26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb10 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1d41 (rev. 0x05)
ahcisata1 at pci0 dev 31 function 2: vendor 0x8086 product 0x1d02 (rev. 0x05)
ahcisata1: interrupting at ioapic0 pin 19
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.30, 6 ports, 32 slots, CAP
0xe7309f45<EMS,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus2 at ahcisata1 channel 0
atabus3 at ahcisata1 channel 1
atabus4 at ahcisata1 channel 2
atabus5 at ahcisata1 channel 3
atabus6 at ahcisata1 channel 4
atabus7 at ahcisata1 channel 5
vendor 0x8086 product 0x1d22 (SMBus serial bus, revision 0x05) at pci0
dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: failed to evaluate _TSS: AE_LIMIT
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat  10 us, pow 130000 mW, 3001 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 130000 mW, 3000 MHz
acpicpu0: P2: FFH, lat  10 us, pow 123381 mW, 2900 MHz
acpicpu0: P3: FFH, lat  10 us, pow 113032 mW, 2700 MHz
acpicpu0: P4: FFH, lat  10 us, pow 106760 mW, 2600 MHz
acpicpu0: P5: FFH, lat  10 us, pow 101837 mW, 2500 MHz
acpicpu0: P6: FFH, lat  10 us, pow 97028 mW, 2400 MHz
acpicpu0: P7: FFH, lat  10 us, pow 86460 mW, 2200 MHz
acpicpu0: P8: FFH, lat  10 us, pow 81920 mW, 2100 MHz
acpicpu0: P9: FFH, lat  10 us, pow 76313 mW, 2000 MHz
acpicpu0: P10: FFH, lat  10 us, pow 67723 mW, 1800 MHz
acpicpu0: P11: FFH, lat  10 us, pow 62437 mW, 1700 MHz
acpicpu0: P12: FFH, lat  10 us, pow 58367 mW, 1600 MHz
acpicpu0: P13: FFH, lat  10 us, pow 54383 mW, 1500 MHz
acpicpu0: P14: FFH, lat  10 us, pow 45621 mW, 1300 MHz
acpicpu0: P15: FFH, lat  10 us, pow 41904 mW, 1200 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu1: failed to evaluate _TSS: AE_LIMIT
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
acpicpu2: failed to evaluate _TSS: AE_LIMIT
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
acpicpu3: failed to evaluate _TSS: AE_LIMIT
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
acpicpu4: failed to evaluate _TSS: AE_LIMIT
acpicpu5 at cpu5: ACPI CPU
acpicpu5: failed to evaluate _TSS: AE_LIMIT
acpicpu6 at cpu6: ACPI CPU
acpicpu6: failed to evaluate _TSS: AE_LIMIT
acpicpu7 at cpu7: ACPI CPU
acpicpu7: failed to evaluate _TSS: AE_LIMIT
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata1 port 0: device present, speed: 3.0Gb/s
ahcisata1 port 1: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0
wd0: <ST9250410AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
atapibus0 at atabus3: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GH22NS40, K5I98JK5513,
NL01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata1:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev
2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev
2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: ENE Flash UB623X, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader CF, 0100> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <USB2.0, CardReader SM XD, 0100> disk removable
sd1: drive offline
sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <USB2.0, CardReader MS, 0100> disk removable
sd2: drive offline
sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <USB2.0, CardReader SD, 0100> disk removable
umass1 at uhub2 port 3 configuration 1 interface 0
umass1: vendor 0x13fe silicon-power, rev 2.00/1.10, addr 3
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd3: fabricating a geometry
sd3: 1938 MB, 1938 cyl, 64 head, 32 sec, 512 bytes/sect x 3970048 sectors
sd3: fabricating a geometry
sd4 at scsibus1 target 0 lun 0: <, silicon-power, PMAP> disk removable
sd4: 3822 MB, 7644 cyl, 32 head, 32 sec, 512 bytes/sect x 7827456 sectors
uhub3: device problem, disabling port 3
uhidev0 at uhub3 port 4 configuration 1 interface 0
uhidev0: Kensington Kensington USB/PS2 Orbit, rev 1.10/4.00, addr 4, iclass 3/1
ums0 at uhidev0: 2 buttons
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
findroot: unable to read block 206612029 of dev sd3 (22)
findroot: unable to read block 206612029 of dev sd4 (22)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev1 at uhub3 port 3 configuration 1 interface 0
uhidev1: Dell Dell USB Keyboard, rev 1.10/3.01, addr 5, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RV630 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic1 pin 8
----------------------------------------------
FreeBSD (PC-BSD 9.0) dmesg:
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
   The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #3: Tue Dec 27 14:14:29 PST 2011
    
root%build9x64.pcbsd.org@localhost:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.0/sys/GENERIC
amd64
CPU: Genuine Intel(R) CPU  @ 3.00GHz (3000.01-MHz K8-class CPU)
 Origin = "GenuineIntel"  Id = 0x206d2  Family = 6  Model = 2d  Stepping = 2
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0x17bee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,AVX>
 AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
 AMD Features2=0x1<LAHF>
 TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8178315264 (7799 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  2
cpu3 (AP): APIC ID:  3
cpu4 (AP): APIC ID:  4
cpu5 (AP): APIC ID:  5
cpu6 (AP): APIC ID:  6
cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem
0xc0000000-0xcfffffff,0xf4e20000-0xf4e2ffff irq 32 at device 0.0 on
pci2
hdac0: <ATI RV630 High Definition Audio Controller> mem
0xf4e30000-0xf4e33fff irq 36 at device 0.1 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf4f27000-0xf4f273ff
irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
hdac1: <Intel Patsburg High Definition Audio Controller> mem
0xf4f00000-0xf4f03fff irq 22 at device 27.0 on pci0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf4d00000-0xf4d07fff
irq 17 at device 0.0 on pci6
xhci0: 32 byte context size.
usbus1 on xhci0
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci7: <ACPI PCI bus> on pcib7
bge0: <Broadcom BCM57765 B0, ASIC rev. 0x57785100> mem
0xd0010000-0xd001ffff,0xd0000000-0xd000ffff irq 18 at device 0.0 on
pci7
bge0: CHIP ID 0x57785100; ASIC REV 0x57785; CHIP REV 0x577851; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: bc:5f:f4:0e:84:25
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib8
fwohci0: <1394 Open Host Controller Interface> port 0xd000-0xd0ff mem
0xf4b00000-0xf4b007ff irq 19 at device 0.0 on pci8
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:8f:13:00:a6:8f:10:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:8f:13:8f:10:00
fwe0: Ethernet address: 02:8f:13:8f:10:00
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:8f:13:00:a6:8f:10:00 @ 0xfffe00000000,
S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x42d4000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci9: <ACPI PCI bus> on pcib9
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf4a00000-0xf4a07fff
irq 16 at device 0.0 on pci9
xhci1: 32 byte context size.
usbus2 on xhci1
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci10: <ACPI PCI bus> on pcib10
ahci0: <ASMedia ASM1061 AHCI SATA controller> port
0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f
mem 0xf4900000-0xf49001ff irq 17 at device 0.0 on pci10
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf4f26000-0xf4f263ff
irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel Patsburg AHCI SATA controller> port
0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f
mem 0xf4f25000-0xf4f257ff irq 19 at device 31.2 on pci0
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich4: <AHCI channel> at channel 2 on ahci1
ahcich5: <AHCI channel> at channel 3 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcib12: <ACPI Host-PCI bridge> on acpi0
pci255: <ACPI PCI bus> on pcib12
pci255: <base peripheral> at device 8.0 (no driver attached)
pci255: <base peripheral> at device 8.3 (no driver attached)
pci255: <base peripheral> at device 8.4 (no driver attached)
pci255: <base peripheral> at device 9.0 (no driver attached)
pci255: <base peripheral> at device 9.3 (no driver attached)
pci255: <base peripheral> at device 9.4 (no driver attached)
pci255: <base peripheral> at device 10.0 (no driver attached)
pci255: <base peripheral> at device 10.1 (no driver attached)
pci255: <base peripheral> at device 10.2 (no driver attached)
pci255: <base peripheral> at device 10.3 (no driver attached)
pci255: <base peripheral> at device 11.0 (no driver attached)
pci255: <base peripheral> at device 11.3 (no driver attached)
pci255: <base peripheral> at device 12.0 (no driver attached)
pci255: <base peripheral> at device 12.1 (no driver attached)
pci255: <base peripheral> at device 12.6 (no driver attached)
pci255: <base peripheral> at device 12.7 (no driver attached)
pci255: <base peripheral> at device 13.0 (no driver attached)
pci255: <base peripheral> at device 13.1 (no driver attached)
pci255: <base peripheral> at device 13.6 (no driver attached)
pci255: <base peripheral> at device 14.0 (no driver attached)
pci255: <dasp> at device 14.1 (no driver attached)
pci255: <base peripheral> at device 15.0 (no driver attached)
pci255: <base peripheral> at device 15.1 (no driver attached)
pci255: <base peripheral> at device 15.2 (no driver attached)
pci255: <base peripheral> at device 15.3 (no driver attached)
pci255: <base peripheral> at device 15.4 (no driver attached)
pci255: <base peripheral> at device 15.5 (no driver attached)
pci255: <base peripheral> at device 15.6 (no driver attached)
pci255: <base peripheral> at device 16.0 (no driver attached)
pci255: <base peripheral> at device 16.1 (no driver attached)
pci255: <base peripheral> at device 16.2 (no driver attached)
pci255: <base peripheral> at device 16.3 (no driver attached)
pci255: <base peripheral> at device 16.4 (no driver attached)
pci255: <base peripheral> at device 16.5 (no driver attached)
pci255: <base peripheral> at device 16.6 (no driver attached)
pci255: <base peripheral> at device 16.7 (no driver attached)
pci255: <base peripheral> at device 17.0 (no driver attached)
pci255: <base peripheral> at device 19.0 (no driver attached)
pci255: <dasp> at device 19.1 (no driver attached)
pci255: <dasp> at device 19.4 (no driver attached)
pci255: <dasp> at device 19.5 (no driver attached)
pci255: <base peripheral> at device 19.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Realtek (Unknown)
pcm1: <HDA Realtek (Unknown) PCM #0 Analog> at cad 0 nid 1 on hdac1
pcm2: <HDA Realtek (Unknown) PCM #1 Analog> at cad 0 nid 1 on hdac1
pcm3: <HDA Realtek (Unknown) PCM #2 Digital> at cad 0 nid 1 on hdac1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <0x1b21> at usbus1
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <0x1b21> at usbus2
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <HDS722516VLSA80 V34OA63A> ATA-6 SATA 1.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 157066MB (321672960 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <ST9250410AS 0002SDM1> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad8
SMP: AP CPU #1 Launched!
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH22NS40 NL01> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: cd present [2295104 x 2048 byte records]
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
uhub2: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus0
ugen0.2: <vendor 0x8087> at usbus0
ugen3.2: <vendor 0x8087> at usbus3
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr
2> on usbus0
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr
2> on usbus3
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
Root mount waiting for: usbus3
ugen3.3: <ENE Flash> at usbus3
umass0: <ENE Flash UB623X, class 0/0, rev 2.00/1.00, addr 3> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:8:0:-1: Attached to scbus8
Root mount waiting for: usbus3
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <USB2.0 CardReader CF 0100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ugen3.4: <Kensington> at usbus3
ums0: <Kensington Kensington USBPS2 Orbit, class 0/0, rev 1.10/4.00,
addr 4> on usbus3
ums0: 2 buttons and [XY] coordinates ID=0
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da1 at umass-sim0 bus 0 scbus8 target 0 lun 1
da1: <USB2.0 CardReader SM XD 0100> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
ugen3.5: <Dell> at usbus3
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 5> on usbus3
kbd2 at ukbd0
(probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe0:umass-sim0:0:0:2): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:2): SCSI status: Check Condition
(probe0:umass-sim0:0:0:2): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da2 at umass-sim0 bus 0 scbus8 target 0 lun 2
da2: <USB2.0 CardReader MS 0100> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI status: Check Condition
(probe0:umass-sim0:0:0:3): SCSI sense: UNIT ATTENTION asc:28,0 (Not
ready to ready change, medium may have changed)
da3 at umass-sim0 bus 0 scbus8 target 0 lun 3
da3: <USB2.0 CardReader SD 0100> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: 1938MB (3970048 512 byte sectors: 255H 63S/T 247C)
Trying to mount root from zfs:tank0 []...
Cuse4BSD v0.1.21 @ /dev/cuse
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <ATI Radeon HD 2600 XT> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] Initialized radeon 1.31.0 20080613
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RV630 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RV630 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RV630 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
bge0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
info: [drm] Resetting GPU
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RV630 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs

On Wed, Apr 25, 2012 at 2:10 AM, Jeff Rizzo <riz%netbsd.org@localhost> wrote:
> On 4/24/12 4:23 AM, Andrius V wrote:
>>
>> Hello,
>>
>> I've recently upgraded to Asrock X79 Extreme4-M platform. NetBSD (6
>> BETA) booted surprisingly well, however, the biggest problem was
>> unsupported NIC. Asrock uses Broadcom BCM57781 network chip in their
>> motherboards recently. NetBSD configures bge0 device but there is the
>> line that ASIC is unknown (bge0: ASIC unknown BCM57765 (0x57785100))
>> and network just doesn't work (DHCP doesn't assign any IP address,
>> manual configuration doesn't help too). I checked that FreeBSD already
>> supports device as BCM57765 B0. Would it be difficult to add support
>> for it? Should I file bug report for this? Thank you.
>>
>> Regards,
>> Andrius V
>
>
> Can you post the dmesg?  And if you've booted FreeBSD, the dmesg from there
> as well?
>
> Thanks,
> +j
>
Follow-Ups:
- Re: BCM57781 is not supported
  - From: Jeff Rizzo
- Re: BCM57781 is not supported
  - From: Jukka Ruohonen
References:
- BCM57781 is not supported
  - From: Andrius V
- Re: BCM57781 is not supported
  - From: Jeff Rizzo
Prev by Date: Re: Looking for a hardware recommendation.
Next by Date: Re: BCM57781 is not supported
Previous by Thread: Re: BCM57781 is not supported
Next by Thread: Re: BCM57781 is not supported
Indexes:
Home | Main Index | Thread Index | Old Index