Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: ATA (CF card) feature detection
bouyer%antioche.eu.org@localhost said:
> It looks like it doesn't report any DMA mode.
It must, somehow... Cameras at least can use it apparently.
> What does atactl identify say about it ?
Model: SanDisk SDCFX-032G, Rev: HDX 5.08, Serial #: DFZ011610044117
Device type: ATAPI, removable
Capacity 32 Gbytes, 62533296 sectors, 512 bytes/sector
Cylinders: 62037, heads: 16, sec/track: 63
Device capabilities:
DMA
LBA
ATA standby timer values
Device supports following standards:
ATA-4
Command set support:
NOP command (enabled)
READ BUFFER command (enabled)
WRITE BUFFER command (enabled)
write cache (disabled)
FLUSH CACHE EXT command (disabled)
FLUSH CACHE command (disabled)
48-bit Address feature set (enabled)
Advanced Power Management feature set (disabled)
CFA feature set (enabled)
best regards
Matthias
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzender des Aufsichtsrats: MinDir Dr. Karl Eugen Huthmacher
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Kennen Sie schon unsere app? http://www.fz-juelich.de/app
Home |
Main Index |
Thread Index |
Old Index