Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
diagnostic panic: rw_lock_held(&wl->wl_rwlock)
Trying to upgrade an amd64 5.0_STABLE system, I am getting panic: kernel
diagnostic assertion "rw_lock_held(&wl->wl_rwlock) failed: file
"/u2/netbsd-current/src/sys/kern/vfs_wapbl.c", line 1628 .
The 5.0 kernel also had option DIAGNOSTICS and never trigger the assert.
There are a number of PRs directly or indirectly related to this assert, none
have been resolved: 41189, 41192, 41977, 42149, 42551, 44377 and 44746.
I'd like to run current on this system as it's version of ACPICA (20110211)
gets rid of an interrupt storm that uses one of the two cores of the processor.
Can I ignore the assert? (ie. run without DIAGNOSTIC?) Probably not, so what
can I do to help resolve this?
--
aew
NetBSD 5.99.49 (WAPANA) #1: Wed Apr 13 13:14:37 EDT 2011
andreas%weekend.wrede.pvt@localhost:/u2/netbsd-current/obj.amd64/sys/arch/amd64/compile/WAPANA
total memory = 1789 MB
avail memory = 1720 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Gigabyte Technology Co., Ltd. GA-MA78GM-US2H ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Athlon(tm) 7850 Dual-Core Processor, id 0x100f23
cpu1 at mainbus0 apid 1: AMD Athlon(tm) 7850 Dual-Core Processor, id 0x100f23
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110211
acpi0: X/RSDT: OemId <GBT ,GBTUACPI,42302e31>, AslId <GBTU,01010101>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
SYSR (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
PMIO (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
sysbeep0 at pcppi1
com2 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com2: ns16550a, working fifo
lpt2 at acpi0 (ECP1, PNP0401): io 0x378-0x37f,0x778-0x77b irq 7 drq 3
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
EXPL (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpi0: [MADT] LAPIC : CPU ID 0, LAPIC ID 0, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 1, LAPIC ID 1, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 2, LAPIC ID 2, FLAGS 0x00
acpi0: [MADT] LAPIC : CPU ID 3, LAPIC ID 3, FLAGS 0x00
acpi0: [MADT] I/O APIC : ID 2, GSI 0, ADDR 0xFEC00000
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 0, GSI 2, FLAGS 0x00
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 9, GSI 9, FLAGS 0x0F
acpi0: [MADT] LAPIC NMI : CPU ID 0, LINT 1, FLAGS 0x00
acpi0: [MADT] LAPIC NMI : CPU ID 1, LINT 1, FLAGS 0x00
acpi0: [MADT] LAPIC NMI : CPU ID 2, LINT 1, FLAGS 0x00
acpi0: [MADT] LAPIC NMI : CPU ID 3, LINT 1, FLAGS 0x00
acpi0: [FADT] FACS : 0x000000006FDE0000
acpi0: [FADT] DSDT : 0x000000006FDE30C0
acpi0: [FADT] INT_MODEL : 0x0000000000000000
acpi0: [FADT] PM_PROFILE : 0x0000000000000001
acpi0: [FADT] SCI_INT : 0x0000000000000009
acpi0: [FADT] SMI_CMD : 0x00000000000000B0
acpi0: [FADT] ACPI_ENABLE : 0x00000000000000A1
acpi0: [FADT] ACPI_DISABLE : 0x00000000000000A0
acpi0: [FADT] S4BIOS_REQ : 0x0000000000000000
acpi0: [FADT] PSTATE_CNT : 0x0000000000000000
acpi0: [FADT] PM1a_EVT_BLK : 0x0000000000004000
acpi0: [FADT] PM1b_EVT_BLK : 0x0000000000000000
acpi0: [FADT] PM1a_CNT_BLK : 0x0000000000004004
acpi0: [FADT] PM1b_CNT_BLK : 0x0000000000000000
acpi0: [FADT] PM2_CNT_BLK : 0x0000000000004050
acpi0: [FADT] PM_TMR_BLK : 0x0000000000004008
acpi0: [FADT] GPE0_BLK : 0x0000000000004020
acpi0: [FADT] GPE1_BLK : 0x0000000000000000
acpi0: [FADT] PM1_EVT_LEN : 0x0000000000000004
acpi0: [FADT] PM1_CNT_LEN : 0x0000000000000002
acpi0: [FADT] PM2_CNT_LEN : 0x0000000000000001
acpi0: [FADT] PM_TMR_LEN : 0x0000000000000004
acpi0: [FADT] GPE0_BLK_LEN : 0x0000000000000008
acpi0: [FADT] GPE1_BLK_LEN : 0x0000000000000000
acpi0: [FADT] GPE1_BASE : 0x0000000000000000
acpi0: [FADT] CST_CNT : 0x0000000000000000
acpi0: [FADT] P_LVL2_LAT : 0x0000000000000065
acpi0: [FADT] P_LVL3_LAT : 0x00000000000003E9
acpi0: [FADT] FLUSH_SIZE : 0x0000000000000000
acpi0: [FADT] FLUSH_STRIDE : 0x0000000000000000
acpi0: [FADT] DUTY_OFFSET : 0x0000000000000001
acpi0: [FADT] DUTY_WIDTH : 0x0000000000000000
acpi0: [FADT] DAY_ALRM : 0x000000000000000D
acpi0: [FADT] MON_ALRM : 0x0000000000000000
acpi0: [FADT] CENTURY : 0x0000000000000000
acpi0: [FADT] IAPC_BOOT_ARCH : 0x0000000000000000
acpi0: [FADT] RESET_VALUE : 0x0000000000000000
acpi0: [FADT] WBINVD : 0x0000000000000001
acpi0: [FADT] WBINVD_FLUSH : 0x0000000000000000
acpi0: [FADT] PROC_C1 : 0x0000000000000004
acpi0: [FADT] P_LVL2_UP : 0x0000000000000008
acpi0: [FADT] PWR_BUTTON : 0x0000000000000000
acpi0: [FADT] SLP_BUTTON : 0x0000000000000020
acpi0: [FADT] FIX_RTC : 0x0000000000000000
acpi0: [FADT] RTC_S4 : 0x0000000000000080
acpi0: [FADT] TMR_VAL_EXT : 0x0000000000000100
acpi0: [FADT] DCK_CAP : 0x0000000000000000
acpi0: [FADT] RESET_REG_SUP : 0x0000000000000000
acpi0: [FADT] SEALED_CASE : 0x0000000000000000
acpi0: [FADT] HEADLESS : 0x0000000000000000
acpi0: [FADT] CPU_SW_SLP : 0x0000000000000000
acpi0: [FADT] PCI_EXP_WAK : 0x0000000000000000
acpi0: [FADT] PLATFORM_CLK : 0x0000000000000000
acpi0: [FADT] S4_RTC_STS : 0x0000000000000000
acpi0: [FADT] REMOTE_POWER : 0x0000000000000000
acpi0: [FADT] APIC_CLUSTER : 0x0000000000000000
acpi0: [FADT] APIC_PHYSICAL : 0x0000000000000000
acpi0: [\ ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [C000] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [C001] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [C002] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [C003] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [_SB ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [PWRB] HID PNP0C0C UID - STA 0x0000000B ADR -
acpi0: [PCI0] HID PNP0A03 UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [SYSR] HID PNP0C02 UID 1 STA 0xFFFFFFFF ADR -
acpi0: [SMB0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140000
acpi0: [USB0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000120000
acpi0: [USB1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000120001
acpi0: [USB2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000120002
acpi0: [USB3] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000130000
acpi0: [USB4] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000130001
acpi0: [USB5] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000130002
acpi0: [USB6] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140005
acpi0: [SBAZ] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140002
acpi0: [SATA] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000110000
acpi0: [PRID] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D0] HID - UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [P_D1] HID - UID - STA 0x00000000 ADR 0x0000000000000001
acpi0: [SECD] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [S_D0] HID - UID - STA 0x00000000 ADR 0x0000000000000000
acpi0: [S_D1] HID - UID - STA 0x00000000 ADR 0x0000000000000001
acpi0: [LPC0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140003
acpi0: [PMIO] HID PNP0C02 UID 3 STA 0xFFFFFFFF ADR -
acpi0: [LNKA] HID PNP0C0F UID 1 STA 0x00000009 ADR -
acpi0: [LNKB] HID PNP0C0F UID 2 STA 0x00000009 ADR -
acpi0: [LNKC] HID PNP0C0F UID 3 STA 0x00000009 ADR -
acpi0: [LNKD] HID PNP0C0F UID 4 STA 0x00000009 ADR -
acpi0: [LNKE] HID PNP0C0F UID 5 STA 0x00000009 ADR -
acpi0: [LNKF] HID PNP0C0F UID 6 STA 0x00000009 ADR -
acpi0: [LNK0] HID PNP0C0F UID 7 STA 0x00000009 ADR -
acpi0: [LNK1] HID PNP0C0F UID 8 STA 0x00000009 ADR -
acpi0: [PIC ] HID PNP0000 UID - STA 0xFFFFFFFF ADR -
acpi0: [DMA1] HID PNP0200 UID - STA 0xFFFFFFFF ADR -
acpi0: [TMR ] HID PNP0100 UID - STA 0xFFFFFFFF ADR -
acpi0: [HPET] HID PNP0103 UID - STA 0x0000000F ADR -
acpi0: [RTC ] HID PNP0B00 UID - STA 0xFFFFFFFF ADR -
acpi0: [SPKR] HID PNP0800 UID - STA 0xFFFFFFFF ADR -
acpi0: [COPR] HID PNP0C04 UID - STA 0xFFFFFFFF ADR -
acpi0: [P2P ] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140004
acpi0: [IDE ] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000140001
acpi0: [PRID] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [SECD] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [S_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [S_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [PCE2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000020000
acpi0: [PCE3] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000030000
acpi0: [PCE4] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000040000
acpi0: [PCE5] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000050000
acpi0: [PCE6] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000060000
acpi0: [PCE7] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000070000
acpi0: [PCE9] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000090000
acpi0: [PCEA] HID - UID - STA 0xFFFFFFFF ADR 0x00000000000A0000
acpi0: [PCEB] HID - UID - STA 0xFFFFFFFF ADR 0x00000000000B0000
acpi0: [PCEC] HID - UID - STA 0xFFFFFFFF ADR 0x00000000000C0000
acpi0: [FDC0] HID PNP0700 UID - STA 0x00000000 ADR -
acpi0: [UAR1] HID PNP0501 UID 1 STA 0x0000000F ADR -
acpi0: [LPT1] HID PNP0400 UID - STA 0x00000000 ADR -
acpi0: [ECP1] HID PNP0401 UID - STA 0x0000000F ADR -
acpi0: [PS2M] HID PNP0F13 UID - STA 0x0000000F ADR -
acpi0: [PS2K] HID PNP0303 UID - STA 0x0000000F ADR -
acpi0: [PSMR] HID PNP0C02 UID 3 STA 0x00000000 ADR -
acpi0: [AGP ] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000010000
acpi0: [EXPL] HID PNP0C02 UID 4 STA 0xFFFFFFFF ADR -
acpi0: [MEM ] HID PNP0C01 UID - STA 0xFFFFFFFF ADR -
acpi0: [_TZ ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [AOD ] HID PNP0C14 UID 0 STA 0xFFFFFFFF ADR -
acpi0: [AWY ] HID AWY0001 UID - STA 0x00000000 ADR -
\ [06] []
C000 [12] []
C001 [12] []
C002 [12] []
C003 [12] []
_SB [06] []
PWRB [06] [] <acpibut0>
PCI0 [06] [] (PCI) @ 0x00:0x00:0x00:0x00 [R] [B] -> 0x00:0x00
SYSR [06] []
SMB0 [06] [] (PCI) @ 0x00:0x00:0x14:0x00
USB0 [06] [] (PCI) @ 0x00:0x00:0x12:0x00
USB1 [06] [] (PCI) @ 0x00:0x00:0x12:0x01
USB2 [06] [] (PCI) @ 0x00:0x00:0x12:0x02
USB3 [06] [] (PCI) @ 0x00:0x00:0x13:0x00
USB4 [06] [] (PCI) @ 0x00:0x00:0x13:0x01
USB5 [06] [] (PCI) @ 0x00:0x00:0x13:0x02
USB6 [06] [] (PCI) @ 0x00:0x00:0x14:0x05
SBAZ [06] [] (PCI) @ 0x00:0x00:0x14:0x02
SATA [06] [] (PCI) @ 0x00:0x00:0x11:0x00
PRID [06] []
P_D0 [06] []
P_D1 [06] []
SECD [06] []
S_D0 [06] []
S_D1 [06] []
LPC0 [06] [] (PCI) @ 0x00:0x00:0x14:0x03
PMIO [06] []
LNKA [06] []
LNKB [06] []
LNKC [06] []
LNKD [06] []
LNKE [06] []
LNKF [06] []
LNK0 [06] []
LNK1 [06] []
PIC [06] []
DMA1 [06] []
TMR [06] [] <attimer1>
HPET [06] [] <hpet0>
RTC [06] []
SPKR [06] [] <pcppi1>
COPR [06] []
P2P [06] [] (PCI) @ 0x00:0x00:0x14:0x04 [B] -> 0x00:0x04
IDE [06] [] (PCI) @ 0x00:0x00:0x14:0x01
PRID [06] []
P_D0 [06] []
P_D1 [06] []
SECD [06] []
S_D0 [06] []
S_D1 [06] []
PCE2 [06] [] (PCI) @ 0x00:0x00:0x02:0x00
PCE3 [06] [] (PCI) @ 0x00:0x00:0x03:0x00
PCE4 [06] [] (PCI) @ 0x00:0x00:0x04:0x00 [B] -> 0x00:0x02
PCE5 [06] [] (PCI) @ 0x00:0x00:0x05:0x00
PCE6 [06] [] (PCI) @ 0x00:0x00:0x06:0x00
PCE7 [06] [] (PCI) @ 0x00:0x00:0x07:0x00
PCE9 [06] [] (PCI) @ 0x00:0x00:0x09:0x00
PCEA [06] [] (PCI) @ 0x00:0x00:0x0A:0x00 [B] -> 0x00:0x03
PCEB [06] [] (PCI) @ 0x00:0x00:0x0B:0x00
PCEC [06] [] (PCI) @ 0x00:0x00:0x0C:0x00
FDC0 [06] []
UAR1 [06] [] <com2>
LPT1 [06] []
ECP1 [06] [] <lpt2>
PS2M [06] [] <pckbc1>
PS2K [06] [] <pckbc2>
PSMR [06] []
AGP [06] [] (PCI) @ 0x00:0x00:0x01:0x00 [B] -> 0x00:0x01
EXPL [06] []
MEM [06] []
_TZ [06] []
AOD [06] [] <acpiwmi0>
AWY [06] []
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: AMD product 0x9600 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: AMD RS780 PCI-PCI Bridge (int gfx) (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: ATI Technologies product 0x9610 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon HD 3200 Graphics
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS690/780 HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 48000Hz 16/16
ppb1 at pci0 dev 4 function 0: AMD RS780 PCI-PCIE Bridge (port 0) (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci2 dev 0 function 0: Intel i82574L, rev. 0
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:1b:21:39:50:d4
makphy0 at wm0 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci0 dev 10 function 0: AMD product 0x9609 (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev.
0x02)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 00:1f:d0:d6:52:3a
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: ATI Technologies SB700/SB800 SATA
Controller (AHCI mode)
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.1, 6 ports, 32 command slots, features 0xf722e080
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ohci0 at pci0 dev 18 function 0: ATI Technologies SB700/SB800 USB OHCI
Controller (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: ATI Technologies SB700/SB800 USB OHCI
Controller (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: ATI Technologies SB700/SB800 USB EHCI
Controller (rev. 0x00)
ehci0: applying AMD SB600/SB700 USB freeze workaround
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: ATI Technologies SB700/SB800 USB OHCI
Controller (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: ATI Technologies SB700/SB800 USB OHCI
Controller (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: ATI Technologies SB700/SB800 USB EHCI
Controller (rev. 0x00)
ehci1: applying AMD SB600/SB700 USB freeze workaround
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0
piixpm0: ATI Technologies SB600/SB700/SB800 SMBus Controller (rev. 0x3a)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
spdmem0 at iic0 addr 0x50
spdmem0: DDR2 SDRAM, no parity or ECC, 1GB, 800MHz (PC2-6400)
spdmem0: 14 rows, 10 cols, 1 ranks, 8 banks/chip, 2.50ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-18
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR2 SDRAM, no parity or ECC, 1GB, 800MHz (PC2-6400)
spdmem1: 14 rows, 10 cols, 1 ranks, 8 banks/chip, 2.50ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 5-5-5-18
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev.
0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus6 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus7 at ixpide0 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Realtek ALC885
hdafg1: DAC00 8ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: DIG-In05 2ch: SPDIF In [Jack]
hdafg1: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio0 at hdafg1: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: ATI Technologies SB700/SB800 LPC Host
Controller (rev. 0x00)
ppb3 at pci0 dev 20 function 4: ATI Technologies SB600 PCI to PCI Bridge (rev.
0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
bktr0 at pci4 dev 6 function 0
bktr0: interrupting at ioapic0 pin 20
bktr0: Detected a DPL34-1@-@0 at 0x84
bktr0: Intel Smart Video III/VideoLogic Captivator PCI, <no> tuner, dpl3518a
dolby.
bktr1 at pci4 dev 7 function 0
bktr1: interrupting at ioapic0 pin 21
bktr1: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
radio0 at bktr1
fwohci0 at pci4 dev 14 function 0: Texas Instruments TSB43AA23 IEEE 1394 Host
Controller (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 22
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:ef:0c:89:00:00:1f:d0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ohci4 at pci0 dev 20 function 5: ATI Technologies SB700/SB800 USB OHCI
Controller (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: AMD AMD64 Family10h HyperTransport
Configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1: AMD AMD64 Family10h Address Map Configuration
(rev. 0x00)
pchb3 at pci0 dev 24 function 2: AMD AMD64 Family10h DRAM Configuration (rev.
0x00)
pchb4 at pci0 dev 24 function 3: AMD AMD64 Family10h Miscellaneous
Configuration (rev. 0x00)
pchb5 at pci0 dev 24 function 4: AMD AMD64 Family10h Link Configuration (rev.
0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 2 us, pow 49025 mW, 2800 MHz
acpicpu0: P1: FFH, lat 2 us, pow 30450 mW, 1400 MHz
acpicpu1 at cpu1: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2812951460 Hz quality 3000
uhub0 at usb0: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
uhub6 at usb6: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <ST3500410AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
atapibus0 at atabus6: 2 targets
cd0 at atapibus0 drive 1: <HL-DT-ST RW/DVD GCC-4521B, , 1.01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd1 at atabus6 drive 0
wd1: <IBM-IC35L180AVV207-1>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 172 GB, 359010 cyl, 16 head, 63 sec, 512 bytes/sect x 361882080 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(ixpide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ehci0: handing over full speed device on port 2 to ohci0
ehci1: handing over full speed device on port 1 to ohci2
ehci0: handing over full speed device on port 4 to ohci1
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying smbfs...
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying ext2fs...
mountroot: trying ffs...
/: replaying log to memory
root file system type: ffs
init: copying out path `/sbin/init' 11
/: replaying log to disk
/var: replaying log to disk
/u2: replaying log to disk
uplcom0 at uhub3 port 1
uplcom1 at uhub0 port 2
uplcom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
uplcom1: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
ucom0 at uplcom0
ucom1 at uplcom1
uplcom2 at uhub1 port 1
uplcom2: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2
ucom2 at uplcom2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index